ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Orion board

Add devicetree for new variant of the Y Soft IOT appliance.
The board is based on Hydra with the following changes:

 - faster SoC (1GHz), 4GB RAM and 64GB eMMC
 - removed miniPCIe
 - removed Audio jack
 - removed uSD slot
 - removed RJ10 serial
 - HDMI replaced by USB host

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4572db3fa5ae3029d589789c3afb0da4a46713a2..eec0d61874a4fedb73fded1a9d651b63b3b8b4dd 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -482,6 +482,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
        imx6dl-wandboard-revd1.dtb \
        imx6dl-yapp4-draco.dtb \
        imx6dl-yapp4-hydra.dtb \
+       imx6dl-yapp4-orion.dtb \
        imx6dl-yapp4-ursa.dtb \
        imx6q-apalis-eval.dtb \
        imx6q-apalis-ixora.dtb \

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
new file mode 100644 (file)
index 0000000..0428720
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2020 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+       model = "Y Soft IOTA Orion i.MX6DualLite board";
+       compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl";
+
+       memory@10000000 {
+               device_type = "memory";
+               reg = <0x10000000 0xf0000000>;
+       };
+};
+
+&gpio_oled {
+       status = "okay";
+};
+
+&leds {
+       status = "okay";
+};
+
+&oled {
+       status = "okay";
+};
+
+&reg_usb_h1_vbus {
+       status = "okay";
+};
+
+&touchkeys {
+       status = "okay";
+};
+
+&uart2 {
+       status = "disabled";
+};
+
+&usbh1 {
+       status = "okay";
+};
+
+&usbphy2 {
+       status = "okay";
+};