--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Genesys Logic, Inc.
+ *
+ * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw>
+ *
+ * Version: v0.9.0 (2019-08-08)
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/pci.h>
+#include <linux/mmc/mmc.h>
+#include <linux/delay.h>
+#include "sdhci.h"
+#include "sdhci-pci.h"
+
+/* Genesys Logic extra registers */
+#define SDHCI_GLI_9750_WT 0x800
+#define SDHCI_GLI_9750_WT_EN BIT(0)
+#define GLI_9750_WT_EN_ON 0x1
+#define GLI_9750_WT_EN_OFF 0x0
+
+#define SDHCI_GLI_9750_DRIVING 0x860
+#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0)
+#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26)
+#define GLI_9750_DRIVING_1_VALUE 0xFFF
+#define GLI_9750_DRIVING_2_VALUE 0x3
+
+#define SDHCI_GLI_9750_PLL 0x864
+#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23)
+#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20)
+#define GLI_9750_PLL_TX2_INV_VALUE 0x1
+#define GLI_9750_PLL_TX2_DLY_VALUE 0x0
+
+#define SDHCI_GLI_9750_SW_CTRL 0x874
+#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6)
+#define GLI_9750_SW_CTRL_4_VALUE 0x3
+
+#define SDHCI_GLI_9750_MISC 0x878
+#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2)
+#define SDHCI_GLI_9750_MISC_RX_INV BIT(3)
+#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4)
+#define GLI_9750_MISC_TX1_INV_VALUE 0x0
+#define GLI_9750_MISC_RX_INV_ON 0x1
+#define GLI_9750_MISC_RX_INV_OFF 0x0
+#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF
+#define GLI_9750_MISC_TX1_DLY_VALUE 0x5
+
+#define SDHCI_GLI_9750_TUNING_CONTROL 0x540
+#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4)
+#define GLI_9750_TUNING_CONTROL_EN_ON 0x1
+#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0
+#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16)
+#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19)
+#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1
+#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2
+
+#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544
+#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0)
+#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1
+
+#define GLI_MAX_TUNING_LOOP 40
+
+/* Genesys Logic chipset */
+static inline void gl9750_wt_on(struct sdhci_host *host)
+{
+ u32 wt_value;
+ u32 wt_enable;
+
+ wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
+ wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
+
+ if (wt_enable == GLI_9750_WT_EN_ON)
+ return;
+
+ wt_value &= ~SDHCI_GLI_9750_WT_EN;
+ wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON);
+
+ sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
+}
+
+static inline void gl9750_wt_off(struct sdhci_host *host)
+{
+ u32 wt_value;
+ u32 wt_enable;
+
+ wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT);
+ wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value);
+
+ if (wt_enable == GLI_9750_WT_EN_OFF)
+ return;
+
+ wt_value &= ~SDHCI_GLI_9750_WT_EN;
+ wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF);
+
+ sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT);
+}
+
+static void gli_set_9750(struct sdhci_host *host)
+{
+ u32 driving_value;
+ u32 pll_value;
+ u32 sw_ctrl_value;
+ u32 misc_value;
+ u32 parameter_value;
+ u32 control_value;
+ u16 ctrl2;
+
+ gl9750_wt_on(host);
+
+ driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING);
+ pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL);
+ sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL);
+ misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
+ parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS);
+ control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ driving_value &= ~(SDHCI_GLI_9750_DRIVING_1);
+ driving_value &= ~(SDHCI_GLI_9750_DRIVING_2);
+ driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1,
+ GLI_9750_DRIVING_1_VALUE);
+ driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2,
+ GLI_9750_DRIVING_2_VALUE);
+ sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING);
+
+ sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4;
+ sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4,
+ GLI_9750_SW_CTRL_4_VALUE);
+ sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL);
+
+ /* reset the tuning flow after reinit and before starting tuning */
+ pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV;
+ pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY;
+ pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV,
+ GLI_9750_PLL_TX2_INV_VALUE);
+ pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY,
+ GLI_9750_PLL_TX2_DLY_VALUE);
+
+ misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV;
+ misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
+ misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY;
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV,
+ GLI_9750_MISC_TX1_INV_VALUE);
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
+ GLI_9750_MISC_RX_INV_VALUE);
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY,
+ GLI_9750_MISC_TX1_DLY_VALUE);
+
+ parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY;
+ parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY,
+ GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE);
+
+ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1;
+ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2;
+ control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1,
+ GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE);
+ control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2,
+ GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE);
+
+ sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL);
+ sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
+
+ /* disable tuned clk */
+ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+
+ /* enable tuning parameters control */
+ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
+ control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
+ GLI_9750_TUNING_CONTROL_EN_ON);
+ sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ /* write tuning parameters */
+ sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS);
+
+ /* disable tuning parameters control */
+ control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN;
+ control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN,
+ GLI_9750_TUNING_CONTROL_EN_OFF);
+ sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL);
+
+ /* clear tuned clk */
+ ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ ctrl2 &= ~SDHCI_CTRL_TUNED_CLK;
+ sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2);
+
+ gl9750_wt_off(host);
+}
+
+static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b)
+{
+ u32 misc_value;
+
+ gl9750_wt_on(host);
+
+ misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC);
+ misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV;
+ if (b) {
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
+ GLI_9750_MISC_RX_INV_ON);
+ } else {
+ misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV,
+ GLI_9750_MISC_RX_INV_OFF);
+ }
+ sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC);
+
+ gl9750_wt_off(host);
+}
+
+static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode)
+{
+ int i;
+ int rx_inv;
+
+ for (rx_inv = 0; rx_inv < 2; rx_inv++) {
+ gli_set_9750_rx_inv(host, !!rx_inv);
+ sdhci_start_tuning(host);
+
+ for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) {
+ u16 ctrl;
+
+ sdhci_send_tuning(host, opcode);
+
+ if (!host->tuning_done) {
+ sdhci_abort_tuning(host, opcode);
+ break;
+ }
+
+ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
+ if (ctrl & SDHCI_CTRL_TUNED_CLK)
+ return 0; /* Success! */
+ break;
+ }
+ }
+ }
+ if (!host->tuning_done) {
+ pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n",
+ mmc_hostname(host->mmc));
+ return -ETIMEDOUT;
+ }
+
+ pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
+ mmc_hostname(host->mmc));
+ sdhci_reset_tuning(host);
+
+ return -EAGAIN;
+}
+
+static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+ host->mmc->retune_period = 0;
+ if (host->tuning_mode == SDHCI_TUNING_MODE_1)
+ host->mmc->retune_period = host->tuning_count;
+
+ gli_set_9750(host);
+ host->tuning_err = __sdhci_execute_tuning_9750(host, opcode);
+ sdhci_end_tuning(host);
+
+ return 0;
+}
+
+static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
+{
+ struct sdhci_host *host = slot->host;
+
+ slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
+static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot)
+{
+ struct sdhci_host *host = slot->host;
+
+ slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ sdhci_enable_v4_mode(host);
+
+ return 0;
+}
+
+static void sdhci_gli_voltage_switch(struct sdhci_host *host)
+{
+ /*
+ * According to Section 3.6.1 signal voltage switch procedure in
+ * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as
+ * follows:
+ * (6) Set 1.8V Signal Enable in the Host Control 2 register.
+ * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this
+ * period.
+ * (8) If 1.8V Signal Enable is cleared by Host Controller, go to
+ * step (12).
+ *
+ * Wait 5ms after set 1.8V signal enable in Host Control 2 register
+ * to ensure 1.8V signal enable bit is set by GL9750/GL9755.
+ */
+ usleep_range(5000, 5500);
+}
+
+static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)
+{
+ sdhci_reset(host, mask);
+ gli_set_9750(host);
+}
+
+static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg)
+{
+ u32 value;
+
+ value = readl(host->ioaddr + reg);
+ if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff)))
+ value |= 0xc8;
+
+ return value;
+}
+
+static const struct sdhci_ops sdhci_gl9755_ops = {
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .voltage_switch = sdhci_gli_voltage_switch,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9755 = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
+ .probe_slot = gli_probe_slot_gl9755,
+ .ops = &sdhci_gl9755_ops,
+};
+
+static const struct sdhci_ops sdhci_gl9750_ops = {
+ .read_l = sdhci_gl9750_readl,
+ .set_clock = sdhci_set_clock,
+ .enable_dma = sdhci_pci_enable_dma,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_gl9750_reset,
+ .set_uhs_signaling = sdhci_set_uhs_signaling,
+ .voltage_switch = sdhci_gli_voltage_switch,
+ .platform_execute_tuning = gl9750_execute_tuning,
+};
+
+const struct sdhci_pci_fixes sdhci_gl9750 = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+ .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50,
+ .probe_slot = gli_probe_slot_gl9750,
+ .ops = &sdhci_gl9750_ops,
+};
projects / users / jedix / linux-maple.git / commitdiff