* blocks, ...
*/
-/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
-static int
-i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
- uint8_t write_byte, uint8_t *read_byte)
-{
- struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
- int ret;
-
- ret = (*algo_data->aux_ch)(adapter, mode,
- write_byte, read_byte);
- return ret;
-}
-
-/*
- * I2C over AUX CH
- */
-
-/*
- * Send the address. If the I2C link is running, this 'restarts'
- * the connection with the new address, this is used for doing
- * a write followed by a read (as needed for DDC)
- */
-static int
-i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
-{
- struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
- int mode = MODE_I2C_START;
- int ret;
-
- if (reading)
- mode |= MODE_I2C_READ;
- else
- mode |= MODE_I2C_WRITE;
- algo_data->address = address;
- algo_data->running = true;
- ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
- return ret;
-}
-
-/*
- * Stop the I2C transaction. This closes out the link, sending
- * a bare address packet with the MOT bit turned off
- */
-static void
-i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
-{
- struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
- int mode = MODE_I2C_STOP;
-
- if (reading)
- mode |= MODE_I2C_READ;
- else
- mode |= MODE_I2C_WRITE;
- if (algo_data->running) {
- (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
- algo_data->running = false;
- }
-}
-
-/*
- * Write a single byte to the current I2C address, the
- * the I2C link must be running or this returns -EIO
- */
-static int
-i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
-{
- struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
- int ret;
-
- if (!algo_data->running)
- return -EIO;
-
- ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
- return ret;
-}
-
-/*
- * Read a single byte from the current I2C address, the
- * I2C link must be running or this returns -EIO
- */
-static int
-i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
-{
- struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
- int ret;
-
- if (!algo_data->running)
- return -EIO;
-
- ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
- return ret;
-}
-
-static int
-i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
- struct i2c_msg *msgs,
- int num)
-{
- int ret = 0;
- bool reading = false;
- int m;
- int b;
-
- for (m = 0; m < num; m++) {
- u16 len = msgs[m].len;
- u8 *buf = msgs[m].buf;
- reading = (msgs[m].flags & I2C_M_RD) != 0;
- ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
- if (ret < 0)
- break;
- if (reading) {
- for (b = 0; b < len; b++) {
- ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
- if (ret < 0)
- break;
- }
- } else {
- for (b = 0; b < len; b++) {
- ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
- if (ret < 0)
- break;
- }
- }
- if (ret < 0)
- break;
- }
- if (ret >= 0)
- ret = num;
- i2c_algo_dp_aux_stop(adapter, reading);
- DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret);
- return ret;
-}
-
-static u32
-i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
-{
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
- I2C_FUNC_SMBUS_READ_BLOCK_DATA |
- I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
- I2C_FUNC_10BIT_ADDR;
-}
-
-static const struct i2c_algorithm i2c_dp_aux_algo = {
- .master_xfer = i2c_algo_dp_aux_xfer,
- .functionality = i2c_algo_dp_aux_functionality,
-};
-
-static void
-i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
-{
- (void) i2c_algo_dp_aux_address(adapter, 0, false);
- (void) i2c_algo_dp_aux_stop(adapter, false);
-}
-
-static int
-i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
-{
- adapter->algo = &i2c_dp_aux_algo;
- adapter->retries = 3;
- i2c_dp_aux_reset_bus(adapter);
- return 0;
-}
-
-/**
- * i2c_dp_aux_add_bus() - register an i2c adapter using the aux ch helper
- * @adapter: i2c adapter to register
- *
- * This registers an i2c adapter that uses dp aux channel as it's underlaying
- * transport. The driver needs to fill out the &i2c_algo_dp_aux_data structure
- * and store it in the algo_data member of the @adapter argument. This will be
- * used by the i2c over dp aux algorithm to drive the hardware.
- *
- * RETURNS:
- * 0 on success, -ERRNO on failure.
- *
- * IMPORTANT:
- * This interface is deprecated, please switch to the new dp aux helpers and
- * drm_dp_aux_register().
- */
-int
-i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
-{
- int error;
-
- error = i2c_dp_aux_prepare_bus(adapter);
- if (error)
- return error;
- error = i2c_add_adapter(adapter);
- return error;
-}
-EXPORT_SYMBOL(i2c_dp_aux_add_bus);
-
/* Helpers for DP link training */
static u8 dp_link_status(const u8 link_status[DP_LINK_STATUS_SIZE], int r)
{
#include "gma_display.h"
#include <drm/drm_dp_helper.h>
+/**
+ * struct i2c_algo_dp_aux_data - driver interface structure for i2c over dp
+ * aux algorithm
+ * @running: set by the algo indicating whether an i2c is ongoing or whether
+ * the i2c bus is quiescent
+ * @address: i2c target address for the currently ongoing transfer
+ * @aux_ch: driver callback to transfer a single byte of the i2c payload
+ */
+struct i2c_algo_dp_aux_data {
+ bool running;
+ u16 address;
+ int (*aux_ch) (struct i2c_adapter *adapter,
+ int mode, uint8_t write_byte,
+ uint8_t *read_byte);
+};
+
+/* Run a single AUX_CH I2C transaction, writing/reading data as necessary */
+static int
+i2c_algo_dp_aux_transaction(struct i2c_adapter *adapter, int mode,
+ uint8_t write_byte, uint8_t *read_byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ ret = (*algo_data->aux_ch)(adapter, mode,
+ write_byte, read_byte);
+ return ret;
+}
+
+/*
+ * I2C over AUX CH
+ */
+
+/*
+ * Send the address. If the I2C link is running, this 'restarts'
+ * the connection with the new address, this is used for doing
+ * a write followed by a read (as needed for DDC)
+ */
+static int
+i2c_algo_dp_aux_address(struct i2c_adapter *adapter, u16 address, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_START;
+ int ret;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ algo_data->address = address;
+ algo_data->running = true;
+ ret = i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ return ret;
+}
+
+/*
+ * Stop the I2C transaction. This closes out the link, sending
+ * a bare address packet with the MOT bit turned off
+ */
+static void
+i2c_algo_dp_aux_stop(struct i2c_adapter *adapter, bool reading)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int mode = MODE_I2C_STOP;
+
+ if (reading)
+ mode |= MODE_I2C_READ;
+ else
+ mode |= MODE_I2C_WRITE;
+ if (algo_data->running) {
+ (void) i2c_algo_dp_aux_transaction(adapter, mode, 0, NULL);
+ algo_data->running = false;
+ }
+}
+
+/*
+ * Write a single byte to the current I2C address, the
+ * the I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_put_byte(struct i2c_adapter *adapter, u8 byte)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_WRITE, byte, NULL);
+ return ret;
+}
+
+/*
+ * Read a single byte from the current I2C address, the
+ * I2C link must be running or this returns -EIO
+ */
+static int
+i2c_algo_dp_aux_get_byte(struct i2c_adapter *adapter, u8 *byte_ret)
+{
+ struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data;
+ int ret;
+
+ if (!algo_data->running)
+ return -EIO;
+
+ ret = i2c_algo_dp_aux_transaction(adapter, MODE_I2C_READ, 0, byte_ret);
+ return ret;
+}
+
+static int
+i2c_algo_dp_aux_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
+{
+ int ret = 0;
+ bool reading = false;
+ int m;
+ int b;
+
+ for (m = 0; m < num; m++) {
+ u16 len = msgs[m].len;
+ u8 *buf = msgs[m].buf;
+ reading = (msgs[m].flags & I2C_M_RD) != 0;
+ ret = i2c_algo_dp_aux_address(adapter, msgs[m].addr, reading);
+ if (ret < 0)
+ break;
+ if (reading) {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_get_byte(adapter, &buf[b]);
+ if (ret < 0)
+ break;
+ }
+ } else {
+ for (b = 0; b < len; b++) {
+ ret = i2c_algo_dp_aux_put_byte(adapter, buf[b]);
+ if (ret < 0)
+ break;
+ }
+ }
+ if (ret < 0)
+ break;
+ }
+ if (ret >= 0)
+ ret = num;
+ i2c_algo_dp_aux_stop(adapter, reading);
+ DRM_DEBUG_KMS("dp_aux_xfer return %d\n", ret);
+ return ret;
+}
+
+static u32
+i2c_algo_dp_aux_functionality(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
+ I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+ I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_10BIT_ADDR;
+}
+
+static const struct i2c_algorithm i2c_dp_aux_algo = {
+ .master_xfer = i2c_algo_dp_aux_xfer,
+ .functionality = i2c_algo_dp_aux_functionality,
+};
+
+static void
+i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
+{
+ (void) i2c_algo_dp_aux_address(adapter, 0, false);
+ (void) i2c_algo_dp_aux_stop(adapter, false);
+}
+
+static int
+i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
+{
+ adapter->algo = &i2c_dp_aux_algo;
+ adapter->retries = 3;
+ i2c_dp_aux_reset_bus(adapter);
+ return 0;
+}
+
+/*
+ * FIXME: This is the old dp aux helper, gma500 is the last driver that needs to
+ * be ported over to the new helper code in drm_dp_helper.c like i915 or radeon.
+ */
+static int __deprecated
+i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
+{
+ int error;
+
+ error = i2c_dp_aux_prepare_bus(adapter);
+ if (error)
+ return error;
+ error = i2c_add_adapter(adapter);
+ return error;
+}
+
#define _wait_for(COND, MS, W) ({ \
unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
int ret__ = 0; \
#define MODE_I2C_READ 4
#define MODE_I2C_STOP 8
-/**
- * struct i2c_algo_dp_aux_data - driver interface structure for i2c over dp
- * aux algorithm
- * @running: set by the algo indicating whether an i2c is ongoing or whether
- * the i2c bus is quiescent
- * @address: i2c target address for the currently ongoing transfer
- * @aux_ch: driver callback to transfer a single byte of the i2c payload
- */
-struct i2c_algo_dp_aux_data {
- bool running;
- u16 address;
- int (*aux_ch) (struct i2c_adapter *adapter,
- int mode, uint8_t write_byte,
- uint8_t *read_byte);
-};
-
-int
-i2c_dp_aux_add_bus(struct i2c_adapter *adapter);
-
-
#define DP_LINK_STATUS_SIZE 6
bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
int lane_count);
projects / users / hch / xfs.git / commitdiff