# 3) create one <module>.mod.c file pr. module
# 4) create one Module.symvers file with CRC for all exported symbols
# 5) compile all <module>.mod.c files
-# 6) final link of the module to a <module.ko> (or <module.unsigned>) file
-# 7) signs the modules to a <module.ko> file
+# 6) final link of the module to a <module.ko> file
# Step 3 is used to place certain information in the module's ELF
# section, including information such as:
# Step 4 is solely used to allow module versioning in external modules,
# where the CRC of each module is retrieved from the Module.symvers file.
-# Step 7 is dependent on CONFIG_MODULE_SIG being enabled.
-
# KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined
# symbols in the final module linking stage
# KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules.
targets += $(modules:.ko=.mod.o)
# Step 6), final link of the modules
-ifneq ($(CONFIG_MODULE_SIG),y)
quiet_cmd_ld_ko_o = LD [M] $@
cmd_ld_ko_o = $(LD) -r $(LDFLAGS) \
$(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
$(call if_changed,ld_ko_o)
targets += $(modules)
-else
-quiet_cmd_ld_ko_unsigned_o = LD [M] $@
- cmd_ld_ko_unsigned_o = \
- $(LD) -r $(LDFLAGS) \
- $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \
- -o $@ $(filter-out FORCE,$^) \
- $(if $(AFTER_LINK),; $(AFTER_LINK))
-
-$(modules:.ko=.ko.unsigned): %.ko.unsigned :%.o %.mod.o FORCE
- $(call if_changed,ld_ko_unsigned_o)
-
-targets += $(modules:.ko=.ko.unsigned)
-
-# Step 7), sign the modules
-MODSECKEY = ./signing_key.priv
-MODPUBKEY = ./signing_key.x509
-
-ifeq ($(wildcard $(MODSECKEY))+$(wildcard $(MODPUBKEY)),$(MODSECKEY)+$(MODPUBKEY))
-ifeq ($(KBUILD_SRC),)
- # no O= is being used
- SCRIPTS_DIR := scripts
-else
- SCRIPTS_DIR := $(KBUILD_SRC)/scripts
-endif
-SIGN_MODULES := 1
-else
-SIGN_MODULES := 0
-endif
-
-# only sign if it's an in-tree module
-ifneq ($(KBUILD_EXTMOD),)
-SIGN_MODULES := 0
-endif
-# We strip the module as best we can - note that using both strip and eu-strip
-# results in a smaller module than using either alone.
-EU_STRIP = $(shell which eu-strip || echo true)
-
-quiet_cmd_sign_ko_stripped_ko_unsigned = STRIP [M] $@
- cmd_sign_ko_stripped_ko_unsigned = \
- cp $< $@ && \
- strip -x -g $@ && \
- $(EU_STRIP) $@
-
-ifeq ($(SIGN_MODULES),1)
-
-quiet_cmd_genkeyid = GENKEYID $@
- cmd_genkeyid = \
- perl $(SCRIPTS_DIR)/x509keyid $< $<.signer $<.keyid
-
-%.signer %.keyid: %
- $(call if_changed,genkeyid)
-
-KEYRING_DEP := $(MODSECKEY) $(MODPUBKEY) $(MODPUBKEY).signer $(MODPUBKEY).keyid
-quiet_cmd_sign_ko_ko_stripped = SIGN [M] $@
- cmd_sign_ko_ko_stripped = \
- sh $(SCRIPTS_DIR)/sign-file $(MODSECKEY) $(MODPUBKEY) $< $@
-else
-KEYRING_DEP :=
-quiet_cmd_sign_ko_ko_unsigned = NO SIGN [M] $@
- cmd_sign_ko_ko_unsigned = \
- cp $< $@
-endif
-
-$(modules): %.ko :%.ko.stripped $(KEYRING_DEP) FORCE
- $(call if_changed,sign_ko_ko_stripped)
-
-$(patsubst %.ko,%.ko.stripped,$(modules)): %.ko.stripped :%.ko.unsigned FORCE
- $(call if_changed,sign_ko_stripped_ko_unsigned)
-
-targets += $(modules)
-endif
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
-#!/bin/sh
+#!/bin/bash
#
# Sign a module file using the given key.
#
-# Format: sign-file <key> <x509> <src-file> <dst-file>
+# Format: sign-file <key> <x509> <keyid-script> <module>
#
scripts=`dirname $0`
key="$1"
x509="$2"
-src="$3"
-dst="$4"
+keyid_script="$3"
+mod="$4"
if [ ! -r "$key" ]
then
echo "Can't read X.509 certificate" >&2
exit 2
fi
-if [ ! -r "$x509.signer" ]
-then
- echo "Can't read Signer name" >&2
- exit 2;
-fi
-if [ ! -r "$x509.keyid" ]
-then
- echo "Can't read Key identifier" >&2
- exit 2;
-fi
#
# Signature parameters
(
perl -e "binmode STDOUT; print pack(\"C*\", $prologue)" || exit $?
-openssl dgst $dgst -binary $src || exit $?
-) >$src.dig || exit $?
+openssl dgst $dgst -binary $mod || exit $?
+) >$mod.dig || exit $?
#
# Generate the binary signature, which will be just the integer that comprises
# the signature with no metadata attached.
#
-openssl rsautl -sign -inkey $key -keyform PEM -in $src.dig -out $src.sig || exit $?
-signerlen=`stat -c %s $x509.signer`
-keyidlen=`stat -c %s $x509.keyid`
-siglen=`stat -c %s $src.sig`
+openssl rsautl -sign -inkey $key -keyform PEM -in $mod.dig -out $mod.sig || exit $?
+
+SIGNER="`perl $keyid_script $x509 signer-name`"
+KEYID="`perl $keyid_script $x509 keyid`"
+keyidlen=${#KEYID}
+siglen=${#SIGNER}
#
# Build the signed binary
#
(
- cat $src || exit $?
+ cat $mod || exit $?
echo '~Module signature appended~' || exit $?
- cat $x509.signer $x509.keyid || exit $?
+ echo -n "$SIGNER" || exit $?
+ echo -n "$KEYID" || exit $?
# Preface each signature integer with a 2-byte BE length
perl -e "binmode STDOUT; print pack(\"n\", $siglen)" || exit $?
- cat $src.sig || exit $?
+ cat $mod.sig || exit $?
# Generate the information block
perl -e "binmode STDOUT; print pack(\"CCCCCxxxN\", $algo, $hash, $id_type, $signerlen, $keyidlen, $siglen + 2)" || exit $?
-) >$dst~ || exit $?
+) >$mod~ || exit $?
-# Permit in-place signing
-mv $dst~ $dst || exit $?
+mv $mod~ $mod || exit $?
projects / users / jedix / linux-maple.git / commitdiff