/**
* vpbe_current_encoder_info - Get config info for current encoder
- * @vpbe_dev - vpbe device ptr
+ * @vpbe_dev: vpbe device ptr
*
* Return ptr to current encoder config info
*/
/**
* vpbe_find_encoder_sd_index - Given a name find encoder sd index
*
- * @vpbe_config - ptr to vpbe cfg
- * @output_index - index used by application
+ * @cfg: ptr to vpbe cfg
+ * @index: index used by application
*
* Return sd index of the encoder
*/
/**
* vpbe_g_cropcap - Get crop capabilities of the display
- * @vpbe_dev - vpbe device ptr
- * @cropcap - cropcap is a ptr to struct v4l2_cropcap
+ * @vpbe_dev: vpbe device ptr
+ * @cropcap: cropcap is a ptr to struct v4l2_cropcap
*
* Update the crop capabilities in crop cap for current
* mode
/**
* vpbe_enum_outputs - enumerate outputs
- * @vpbe_dev - vpbe device ptr
- * @output - ptr to v4l2_output structure
+ * @vpbe_dev: vpbe device ptr
+ * @output: ptr to v4l2_output structure
*
* Enumerates the outputs available at the vpbe display
* returns the status, -EINVAL if end of output list
/**
* vpbe_set_output - Set output
- * @vpbe_dev - vpbe device ptr
- * @index - index of output
+ * @vpbe_dev: vpbe device ptr
+ * @index: index of output
*
* Set vpbe output to the output specified by the index
*/
/**
* vpbe_get_output - Get output
- * @vpbe_dev - vpbe device ptr
+ * @vpbe_dev: vpbe device ptr
*
* return current vpbe output to the the index
*/
return vpbe_dev->current_out_index;
}
-/**
+/*
* vpbe_s_dv_timings - Set the given preset timings in the encoder
*
* Sets the timings if supported by the current encoder. Return the status.
return ret;
}
-/**
+/*
* vpbe_g_dv_timings - Get the timings in the current encoder
*
* Get the timings in the current encoder. Return the status. 0 - success
return -EINVAL;
}
-/**
+/*
* vpbe_enum_dv_timings - Enumerate the dv timings in the current encoder
*
* Get the timings in the current encoder. Return the status. 0 - success
return 0;
}
-/**
+/*
* vpbe_s_std - Set the given standard in the encoder
*
* Sets the standard if supported by the current encoder. Return the status.
return ret;
}
-/**
+/*
* vpbe_g_std - Get the standard in the current encoder
*
* Get the standard in the current encoder. Return the status. 0 - success
return -EINVAL;
}
-/**
+/*
* vpbe_set_mode - Set mode in the current encoder using mode info
*
* Use the mode string to decide what timings to set in the encoder
/**
* vpbe_initialize() - Initialize the vpbe display controller
- * @vpbe_dev - vpbe device ptr
+ * @dev: Master and slave device ptr
+ * @vpbe_dev: vpbe device ptr
*
* Master frame buffer device drivers calls this to initialize vpbe
* display controller. This will then registers v4l2 device and the sub
/**
* vpbe_deinitialize() - de-initialize the vpbe display controller
- * @dev - Master and slave device ptr
+ * @dev: Master and slave device ptr
+ * @vpbe_dev: vpbe device ptr
*
* vpbe_master and slave frame buffer devices calls this to de-initialize
* the display controller. It is called when master and slave device
}
-/**
+/*
* vpbe_try_format()
* If user application provides width and height, and have bytesperline set
* to zero, driver calculates bytesperline and sizeimage based on hardware
}
-/**
+/*
* vpbe_display_s_std - Set the given standard in the encoder
*
* Sets the standard if supported by the current encoder. Return the status.
return 0;
}
-/**
+/*
* vpbe_display_g_std - Get the standard in the current encoder
*
* Get the standard in the current encoder. Return the status. 0 - success
return -EINVAL;
}
-/**
+/*
* vpbe_display_enum_output - enumerate outputs
*
* Enumerates the outputs available at the vpbe display
return 0;
}
-/**
+/*
* vpbe_display_s_output - Set output to
* the output specified by the index
*/
return 0;
}
-/**
+/*
* vpbe_display_g_output - Get output from subdevice
* for a given by the index
*/
return 0;
}
-/**
+/*
* vpbe_display_enum_dv_timings - Enumerate the dv timings
*
* enum the timings in the current encoder. Return the status. 0 - success
return 0;
}
-/**
+/*
* vpbe_display_s_dv_timings - Set the dv timings
*
* Set the timings in the current encoder. Return the status. 0 - success
return 0;
}
-/**
+/*
* vpbe_display_g_dv_timings - Set the dv timings
*
* Get the timings in the current encoder. Return the status. 0 - success
/**
* _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446
- * @sd - ptr to struct osd_state
- * @field_inversion - inversion flag
- * @fb_base_phys - frame buffer address
- * @lconfig - ptr to layer config
+ * @sd: ptr to struct osd_state
+ * @field_inversion: inversion flag
+ * @fb_base_phys: frame buffer address
+ * @lconfig: ptr to layer config
*
* This routine implements a workaround for the field signal inversion silicon
* erratum described in Advisory 1.3.8 for the DM6446. The fb_base_phys and
/**
* try_layer_config() - Try a specific configuration for the layer
- * @sd - ptr to struct osd_state
- * @layer - layer to configure
- * @lconfig - layer configuration to try
+ * @sd: ptr to struct osd_state
+ * @layer: layer to configure
+ * @lconfig: layer configuration to try
*
* If the requested lconfig is completely rejected and the value of lconfig on
* exit is the current lconfig, then try_layer_config() returns 1. Otherwise,
projects / users / hch / dma-mapping.git / commitdiff