ARM: dts: Use GPIO constants for flags cells in exynos3250 boards

The board DTS are using numeric values instead of the defined GPIO
constanst to express polarity, use them to make the DTS more clear.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 540a0adf2be6dcc94da5b487958cacca4348996d..c14129e0761da98a592f2ada935c59c1d99a519e 100644 (file)
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -52,13 +52,13 @@
                regulator-name = "V_EMMC_2.8V-fixed";
                regulator-min-microvolt = <2800000>;
                regulator-max-microvolt = <2800000>;
-               gpio = <&gpk0 2 0>;
+               gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
 
        i2c_max77836: i2c-gpio-0 {
                compatible = "i2c-gpio";
-               gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+               gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
                #address-cells = <1>;
                #size-cells = <0>;
 
@@ -266,14 +266,14 @@
                                regulator-name = "V_EMMC_1.8V";
                                regulator-min-microvolt = <1800000>;
                                regulator-max-microvolt = <1800000>;
-                               samsung,ext-control-gpios = <&gpk0 2 0>;
+                               samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
                        };
 
                        ldo12_reg: LDO12 {
                                regulator-name = "V_EMMC_2.8V";
                                regulator-min-microvolt = <2800000>;
                                regulator-max-microvolt = <2800000>;
-                               samsung,ext-control-gpios = <&gpk0 2 0>;
+                               samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
                        };
 
                        ldo13_reg: LDO13 {

diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 41a5fafb9aa93a5393cc7b0930f376041f3a5fbb..830e216f7e1099f0c205cf96d10b4dd553afb86e 100644 (file)
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -49,7 +49,7 @@
 
        i2c_max77836: i2c-gpio-0 {
                compatible = "i2c-gpio";
-               gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+               gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
                #address-cells = <1>;
                #size-cells = <0>;
 
@@ -188,8 +188,8 @@
                reg = <0>;
                vdd3-supply = <&ldo16_reg>;
                vci-supply = <&ldo20_reg>;
-               reset-gpios = <&gpe0 1 0>;
-               te-gpios = <&gpx0 6 0>;
+               reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+               te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
                power-on-delay= <30>;
                power-off-delay= <120>;
                reset-delay = <5>;
@@ -368,14 +368,14 @@
                                regulator-name = "V_EMMC_1.8V";
                                regulator-min-microvolt = <1800000>;
                                regulator-max-microvolt = <1800000>;
-                               samsung,ext-control-gpios = <&gpk0 2 0>;
+                               samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
                        };
 
                        ldo12_reg: LDO12 {
                                regulator-name = "V_EMMC_2.8V";
                                regulator-min-microvolt = <2800000>;
                                regulator-max-microvolt = <2800000>;
-                               samsung,ext-control-gpios = <&gpk0 2 0>;
+                               samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
                        };
 
                        ldo13_reg: LDO13 {