power: supply: gpio-charger: add support for default charge current limit

With DT properties charge-current-limit-gpios and
charge-current-limit-mapping one can define charge current limits in uA
using up to 32 GPIOs. At the moment the driver defaults to smallest charge
current limitation for safety reasons. When disabling charging is
supported, which should be common, the driver defaults to non charging on
probe. By having a default, charging can be enabled on probe for such
devices.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://lore.kernel.org/r/20241218-default-charge-current-limit-v3-2-b26118cf06b5@liebherr.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
index 6139f736ecbe4ffc74848797a72095f4cadf3b62..46d18ce6a7392b95e44cbf459566661e7f7cb0f3 100644 (file)
--- a/drivers/power/supply/gpio-charger.c
+++ b/drivers/power/supply/gpio-charger.c
@@ -195,6 +195,8 @@ static int init_charge_current_limit(struct device *dev,
 {
        int i, len;
        u32 cur_limit = U32_MAX;
+       bool set_def_limit;
+       u32 def_limit;
 
        gpio_charger->current_limit_gpios = devm_gpiod_get_array_optional(dev,
                "charge-current-limit", GPIOD_OUT_LOW);
@@ -228,6 +230,9 @@ static int init_charge_current_limit(struct device *dev,
        if (len < 0)
                return len;
 
+       set_def_limit = !device_property_read_u32(dev,
+                                                 "charge-current-limit-default-microamp",
+                                                 &def_limit);
        for (i=0; i < gpio_charger->current_limit_map_size; i++) {
                if (gpio_charger->current_limit_map[i].limit_ua > cur_limit) {
                        dev_err(dev, "charge-current-limit-mapping not sorted by current in descending order\n");
@@ -235,8 +240,16 @@ static int init_charge_current_limit(struct device *dev,
                }
 
                cur_limit = gpio_charger->current_limit_map[i].limit_ua;
+               if (set_def_limit && def_limit == cur_limit) {
+                       set_charge_current_limit(gpio_charger, cur_limit);
+                       return 0;
+               }
        }
 
+       if (set_def_limit)
+               dev_warn(dev, "charge-current-limit-default-microamp %u not listed in charge-current-limit-mapping\n",
+                        def_limit);
+
        /* default to smallest current limitation for safety reasons */
        len = gpio_charger->current_limit_map_size - 1;
        set_charge_current_limit(gpio_charger,