spi: sprd: Add the SPI irq function for the SPI DMA mode

The SPI irq event will use to complete the SPI work in the SPI DMA mode,
so this patch is a preparation for the following DMA mode support.

Moreover the SPI interrupt can be fired when removing the SPI controller,
so we should make sure the SPI controller has stopped the queue in
remove function before freeing the SPI irq.

Signed-off-by: Lanqing Liu <lanqing.liu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c
index 8daa24eec6242ee38a66e6ee9b8476dccdf8b8c4..06578412b04da1b2cd3b011f08baa3d4ef18159e 100644 (file)
--- a/drivers/spi/spi-sprd.c
+++ b/drivers/spi/spi-sprd.c
@@ -133,6 +133,7 @@ struct sprd_spi {
        void __iomem *base;
        struct device *dev;
        struct clk *clk;
+       int irq;
        u32 src_clk;
        u32 hw_mode;
        u32 trans_len;
@@ -141,6 +142,7 @@ struct sprd_spi {
        u32 hw_speed_hz;
        u32 len;
        int status;
+       struct completion xfer_completion;
        const void *tx_buf;
        void *rx_buf;
        int (*read_bufs)(struct sprd_spi *ss, u32 len);
@@ -573,6 +575,48 @@ setup_err:
        return ret;
 }
 
+static irqreturn_t sprd_spi_handle_irq(int irq, void *data)
+{
+       struct sprd_spi *ss = (struct sprd_spi *)data;
+       u32 val = readl_relaxed(ss->base + SPRD_SPI_INT_MASK_STS);
+
+       if (val & SPRD_SPI_MASK_TX_END) {
+               writel_relaxed(SPRD_SPI_TX_END_CLR, ss->base + SPRD_SPI_INT_CLR);
+               if (!(ss->trans_mode & SPRD_SPI_RX_MODE))
+                       complete(&ss->xfer_completion);
+
+               return IRQ_HANDLED;
+       }
+
+       if (val & SPRD_SPI_MASK_RX_END) {
+               writel_relaxed(SPRD_SPI_RX_END_CLR, ss->base + SPRD_SPI_INT_CLR);
+               complete(&ss->xfer_completion);
+
+               return IRQ_HANDLED;
+       }
+
+       return IRQ_NONE;
+}
+
+static int sprd_spi_irq_init(struct platform_device *pdev, struct sprd_spi *ss)
+{
+       int ret;
+
+       ss->irq = platform_get_irq(pdev, 0);
+       if (ss->irq < 0) {
+               dev_err(&pdev->dev, "failed to get irq resource\n");
+               return ss->irq;
+       }
+
+       ret = devm_request_irq(&pdev->dev, ss->irq, sprd_spi_handle_irq,
+                               0, pdev->name, ss);
+       if (ret)
+               dev_err(&pdev->dev, "failed to request spi irq %d, ret = %d\n",
+                       ss->irq, ret);
+
+       return ret;
+}
+
 static int sprd_spi_clk_init(struct platform_device *pdev, struct sprd_spi *ss)
 {
        struct clk *clk_spi, *clk_parent;
@@ -633,11 +677,16 @@ static int sprd_spi_probe(struct platform_device *pdev)
        sctlr->max_speed_hz = min_t(u32, ss->src_clk >> 1,
                                    SPRD_SPI_MAX_SPEED_HZ);
 
+       init_completion(&ss->xfer_completion);
        platform_set_drvdata(pdev, sctlr);
        ret = sprd_spi_clk_init(pdev, ss);
        if (ret)
                goto free_controller;
 
+       ret = sprd_spi_irq_init(pdev, ss);
+       if (ret)
+               goto free_controller;
+
        ret = clk_prepare_enable(ss->clk);
        if (ret)
                goto free_controller;
@@ -688,6 +737,8 @@ static int sprd_spi_remove(struct platform_device *pdev)
                return ret;
        }
 
+       spi_controller_suspend(sctlr);
+
        clk_disable_unprepare(ss->clk);
        pm_runtime_put_noidle(&pdev->dev);
        pm_runtime_disable(&pdev->dev);