ASoC: cs42l42: Always wait at least 3ms after reset

This delay is part of the power-up sequence defined in the datasheet.
A runtime_resume is a power-up so must also include the delay.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index eee3fc32003087871d57a22b9daec58cba186465..811b7b1c9732e13ee365ca1ff223b4e0c28221b2 100644 (file)
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1756,7 +1756,7 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
                dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
                gpiod_set_value_cansleep(cs42l42->reset_gpio, 1);
        }
-       mdelay(3);
+       usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
 
        /* Request IRQ */
        ret = devm_request_threaded_irq(&i2c_client->dev,
@@ -1881,6 +1881,7 @@ static int cs42l42_runtime_resume(struct device *dev)
        }
 
        gpiod_set_value_cansleep(cs42l42->reset_gpio, 1);
+       usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
 
        regcache_cache_only(cs42l42->regmap, false);
        regcache_sync(cs42l42->regmap);

diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 9b017b76828a40f4f79f6c3003369fc4d4a42f97..866d7c873e3c95b0800f2081588cc5c6e3c5994a 100644 (file)
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -740,6 +740,7 @@
 #define CS42L42_FRAC2_VAL(val) (((val) & 0xff0000) >> 16)
 
 #define CS42L42_NUM_SUPPLIES   5
+#define CS42L42_BOOT_TIME_US   3000
 
 static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = {
        "VA",