__u8  baInterfaceNr[n];                                 \
 } __attribute__ ((packed))
 
-#endif
+#endif /* __LINUX_USB_AUDIO_H */
 
  * firmware based USB peripherals.
  */
 
+#ifndef __LINUX_USB_CDC_H
+#define __LINUX_USB_CDC_H
+
 #define USB_CDC_SUBCLASS_ACM                   0x02
 #define USB_CDC_SUBCLASS_ETHERNET              0x06
 #define USB_CDC_SUBCLASS_WHCM                  0x08
        __le16  wLength;
 } __attribute__ ((packed));
 
+#endif /* __LINUX_USB_CDC_H */
 
         */
 };
 
-#endif /* __LINUX_USB_CH9_H */
+#endif /* __LINUX_USB_CH9_H */
 
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#ifndef __LINUX_USB_G_PRINTER_H
+#define __LINUX_USB_G_PRINTER_H
 
 #define PRINTER_NOT_ERROR      0x08
 #define PRINTER_SELECTED       0x10
  */
 #define GADGET_GET_PRINTER_STATUS      _IOR('g', 0x21, unsigned char)
 #define GADGET_SET_PRINTER_STATUS      _IOWR('g', 0x22, unsigned char)
+
+#endif /* __LINUX_USB_G_PRINTER_H */
 
 
 extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit;
 
-#endif /* __LINUX_USB_GADGET_H */
+#endif /* __LINUX_USB_GADGET_H */
 
-#ifndef __LINUX_USB_GADGETFS_H
-#define __LINUX_USB_GADGETFS_H
-
-#include <asm/types.h>
-#include <asm/ioctl.h>
-
-#include <linux/usb/ch9.h>
-
 /*
  * Filesystem based user-mode API to USB Gadget controller hardware
  *
  * then performing data transfers by reading or writing.
  */
 
+#ifndef __LINUX_USB_GADGETFS_H
+#define __LINUX_USB_GADGETFS_H
+
+#include <asm/types.h>
+#include <asm/ioctl.h>
+
+#include <linux/usb/ch9.h>
+
 /*
  * Events are delivered on the ep0 file descriptor, when the user mode driver
  * reads from this file descriptor after writing the descriptors.  Don't
 
-#ifndef __USB_INPUT_H
-#define __USB_INPUT_H
-
 /*
  * Copyright (C) 2005 Dmitry Torokhov
  *
  * the Free Software Foundation.
  */
 
+#ifndef __LINUX_USB_INPUT_H
+#define __LINUX_USB_INPUT_H
+
 #include <linux/usb.h>
 #include <linux/input.h>
 #include <asm/byteorder.h>
        id->version = le16_to_cpu(dev->descriptor.bcdDevice);
 }
 
-#endif
+#endif /* __LINUX_USB_INPUT_H */
 
-#ifndef _IOWARRIOR_H_
-#define _IOWARRIOR_H_
+#ifndef __LINUX_USB_IOWARRIOR_H
+#define __LINUX_USB_IOWARRIOR_H
 
 #define CODEMERCS_MAGIC_NUMBER 0xC0    /* like COde Mercenaries */
 
 */
 #define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info)
 
-#endif  /* _IOWARRIOR_H_ */
+#endif /* __LINUX_USB_IOWARRIOR_H */
 
-
 /*
  * Board initialization code should put one of these into dev->platform_data
  * and place the isp116x onto platform_bus.
  */
 
+#ifndef __LINUX_USB_ISP116X_H
+#define __LINUX_USB_ISP116X_H
+
 struct isp116x_platform_data {
        /* Enable internal resistors on downstream ports */
        unsigned sel15Kres:1;
         */
        void (*delay) (struct device *dev, int delay);
 };
+
+#endif /* __LINUX_USB_ISP116X_H */
 
        __u8  baAssocJackID[n];                                 \
 } __attribute__ ((packed))
 
-#endif
+#endif /* __LINUX_USB_MIDI_H */
 
 /*
  * NetChip 2280 high/full speed USB device controller.
  * Unlike many such controllers, this one talks PCI.
- */
-#ifndef __LINUX_USB_NET2280_H
-#define __LINUX_USB_NET2280_H
-
-/*
+ *
  * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
  * Copyright (C) 2003 David Brownell
  *
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#ifndef __LINUX_USB_NET2280_H
+#define __LINUX_USB_NET2280_H
+
 /*-------------------------------------------------------------------------*/
 
 /* NET2280 MEMORY MAPPED REGISTERS
 
 /* USB OTG (On The Go) defines */
-
 /*
+ *
  * These APIs may be used between USB controllers.  USB device drivers
  * (for either host or peripheral roles) don't use these calls; they
  * continue to use just usb_device and usb_gadget.
  */
 
+#ifndef __LINUX_USB_OTG_H
+#define __LINUX_USB_OTG_H
 
 /* OTG defines lots of enumeration states before device reset */
 enum usb_otg_state {
 
 /* for OTG controller drivers (and maybe other stuff) */
 extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+
+#endif /* __LINUX_USB_OTG_H */
 
  * belong here.
  */
 
+#ifndef __LINUX_USB_QUIRKS_H
+#define __LINUX_USB_QUIRKS_H
+
 /* string descriptors must not be fetched using a 255-byte read */
 #define USB_QUIRK_STRING_FETCH_255     0x00000001
 
 
 /* device can't handle Set-Interface requests */
 #define USB_QUIRK_NO_SET_INTF          0x00000004
+
+#endif /* __LINUX_USB_QUIRKS_H */
 
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-
-#ifndef        __RNDIS_HOST_H
-#define        __RNDIS_HOST_H
-
+#ifndef        __LINUX_USB_RNDIS_HOST_H
+#define        __LINUX_USB_RNDIS_HOST_H
 
 /*
  * CONTROL uses CDC "encapsulated commands" with funky notifications.
 extern struct sk_buff *
 rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
 
-#endif /* __RNDIS_HOST_H */
-
+#endif /* __LINUX_USB_RNDIS_HOST_H */
 
  *
  */
 
-
 #ifndef __LINUX_USB_SERIAL_H
 #define __LINUX_USB_SERIAL_H
 
 
 
 
-#endif /* ifdef __LINUX_USB_SERIAL_H */
+#endif /* __LINUX_USB_SERIAL_H */
 
 
-
 /*
  * board initialization should put one of these into dev->platform_data
  * and place the sl811hs onto platform_bus named "sl811-hcd".
  */
 
+#ifndef __LINUX_USB_SL811_H
+#define __LINUX_USB_SL811_H
+
 struct sl811_platform_data {
        unsigned        can_wakeup:1;
 
        /* void         (*clock_enable)(struct device *dev, int is_on); */
 };
 
+#endif /* __LINUX_USB_SL811_H */
 
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-
-#ifndef        __USBNET_H
-#define        __USBNET_H
-
+#ifndef        __LINUX_USB_USBNET_H
+#define        __LINUX_USB_USBNET_H
 
 /* interface from usbnet core to each USB networking link we handle */
 struct usbnet {
        printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
 
 
-#endif /* __USBNET_H */
+#endif /* __LINUX_USB_USBNET_H */