net: dsa: lantiq_gswip: add terminating \n where missing

Some dev_err are missing the terminating \n. Let's add that.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-4-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index b9c7076ce32f2061cfd2e1cc03d9579fbbb79689..fe64baf0d7f1a06b0410672a32fe5668cb6416db 100644 (file)
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -836,7 +836,7 @@ static int gswip_setup(struct dsa_switch *ds)
 
        err = gswip_pce_load_microcode(priv);
        if (err) {
-               dev_err(priv->dev, "writing PCE microcode failed, %i", err);
+               dev_err(priv->dev, "writing PCE microcode failed, %i\n", err);
                return err;
        }
 
@@ -1792,7 +1792,7 @@ static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table,
        err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL,
                                     GSWIP_BM_RAM_CTRL_BAS);
        if (err) {
-               dev_err(priv->dev, "timeout while reading table: %u, index: %u",
+               dev_err(priv->dev, "timeout while reading table: %u, index: %u\n",
                        table, index);
                return 0;
        }
@@ -2021,7 +2021,7 @@ static void gswip_gphy_fw_remove(struct gswip_priv *priv,
 
        ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0);
        if (ret)
-               dev_err(priv->dev, "can not reset GPHY FW pointer");
+               dev_err(priv->dev, "can not reset GPHY FW pointer\n");
 
        clk_disable_unprepare(gphy_fw->clk_gate);
 
@@ -2050,7 +2050,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
                        priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
                        break;
                default:
-                       dev_err(dev, "unknown GSWIP version: 0x%x", version);
+                       dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
                        return -ENOENT;
                }
        }
@@ -2060,7 +2060,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
                priv->gphy_fw_name_cfg = match->data;
 
        if (!priv->gphy_fw_name_cfg) {
-               dev_err(dev, "GPHY compatible type not supported");
+               dev_err(dev, "GPHY compatible type not supported\n");
                return -ENOENT;
        }
 
@@ -2163,7 +2163,7 @@ static int gswip_probe(struct platform_device *pdev)
                        return -EINVAL;
                break;
        default:
-               dev_err(dev, "unknown GSWIP version: 0x%x", version);
+               dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
                return -ENOENT;
        }
 
@@ -2191,7 +2191,7 @@ static int gswip_probe(struct platform_device *pdev)
                goto gphy_fw_remove;
        }
        if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
-               dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
+               dev_err(dev, "wrong CPU port defined, HW only supports port: %i\n",
                        priv->hw_info->cpu_port);
                err = -EINVAL;
                goto disable_switch;