media: sun6i-csi: Implement address configuration without indirection

Instead of calculating the planar_offset at one point and using it
later in a dedicated function, reimplement address configuration
with v4l2 format info in the buffer_configure function.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index 745ca5bcd733611b3269b775e147a299cbfdb821..673e40f78a9a80f7bc0ef3055481b3cdc00e1c61 100644 (file)
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -463,7 +463,6 @@ static void sun6i_csi_set_window(struct sun6i_csi_device *csi_dev)
        struct sun6i_csi_config *config = &csi_dev->config;
        u32 bytesperline_y;
        u32 bytesperline_c;
-       int *planar_offset = csi_dev->planar_offset;
        u32 width = config->width;
        u32 height = config->height;
        u32 hor_len = width;
@@ -488,7 +487,6 @@ static void sun6i_csi_set_window(struct sun6i_csi_device *csi_dev)
                     SUN6I_CSI_CH_VSIZE_LEN(height) |
                     SUN6I_CSI_CH_VSIZE_START(0));
 
-       planar_offset[0] = 0;
        switch (config->pixelformat) {
        case V4L2_PIX_FMT_NV12_16L16:
        case V4L2_PIX_FMT_NV12:
@@ -497,23 +495,15 @@ static void sun6i_csi_set_window(struct sun6i_csi_device *csi_dev)
        case V4L2_PIX_FMT_NV61:
                bytesperline_y = width;
                bytesperline_c = width;
-               planar_offset[1] = bytesperline_y * height;
-               planar_offset[2] = -1;
                break;
        case V4L2_PIX_FMT_YUV420:
        case V4L2_PIX_FMT_YVU420:
                bytesperline_y = width;
                bytesperline_c = width / 2;
-               planar_offset[1] = bytesperline_y * height;
-               planar_offset[2] = planar_offset[1] +
-                               bytesperline_c * height / 2;
                break;
        case V4L2_PIX_FMT_YUV422P:
                bytesperline_y = width;
                bytesperline_c = width / 2;
-               planar_offset[1] = bytesperline_y * height;
-               planar_offset[2] = planar_offset[1] +
-                               bytesperline_c * height;
                break;
        default: /* raw */
                dev_dbg(csi_dev->dev,
@@ -522,8 +512,6 @@ static void sun6i_csi_set_window(struct sun6i_csi_device *csi_dev)
                bytesperline_y = (sun6i_csi_get_bpp(config->pixelformat) *
                                  config->width) / 8;
                bytesperline_c = 0;
-               planar_offset[1] = -1;
-               planar_offset[2] = -1;
                break;
        }
 
@@ -547,21 +535,6 @@ int sun6i_csi_update_config(struct sun6i_csi_device *csi_dev,
        return 0;
 }
 
-void sun6i_csi_update_buf_addr(struct sun6i_csi_device *csi_dev,
-                              dma_addr_t addr)
-{
-       regmap_write(csi_dev->regmap, SUN6I_CSI_CH_FIFO0_ADDR_REG,
-                    SUN6I_CSI_ADDR_VALUE(addr + csi_dev->planar_offset[0]));
-       if (csi_dev->planar_offset[1] != -1)
-               regmap_write(csi_dev->regmap, SUN6I_CSI_CH_FIFO1_ADDR_REG,
-                            SUN6I_CSI_ADDR_VALUE(addr +
-                                                 csi_dev->planar_offset[1]));
-       if (csi_dev->planar_offset[2] != -1)
-               regmap_write(csi_dev->regmap, SUN6I_CSI_CH_FIFO2_ADDR_REG,
-                            SUN6I_CSI_ADDR_VALUE(addr +
-                                                 csi_dev->planar_offset[2]));
-}
-
 void sun6i_csi_set_stream(struct sun6i_csi_device *csi_dev, bool enable)
 {
        struct regmap *regmap = csi_dev->regmap;

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
index 6c0110e4b3abbee61da8b5f0385709f3ab7f5c90..75867cde7985f4fd5b49d2b5bafb99f22975a34b 100644 (file)
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.h
@@ -60,8 +60,6 @@ struct sun6i_csi_device {
        struct clk                      *clock_mod;
        struct clk                      *clock_ram;
        struct reset_control            *reset;
-
-       int                             planar_offset[3];
 };
 
 struct sun6i_csi_variant {
@@ -98,14 +96,6 @@ int sun6i_csi_set_power(struct sun6i_csi_device *csi_dev, bool enable);
 int sun6i_csi_update_config(struct sun6i_csi_device *csi_dev,
                            struct sun6i_csi_config *config);
 
-/**
- * sun6i_csi_update_buf_addr() - update the csi frame buffer address
- * @csi_dev:   pointer to the csi device
- * @addr:      frame buffer's physical address
- */
-void sun6i_csi_update_buf_addr(struct sun6i_csi_device *csi_dev,
-                              dma_addr_t addr);
-
 /**
  * sun6i_csi_set_stream() - start/stop csi streaming
  * @csi_dev:   pointer to the csi device

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c
index 9a20b9fc25770e629c782054bc3902a868931587..5e7bbaa1006f25ecb5aa27e2cec011d2280da208 100644 (file)
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi_capture.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/of.h>
+#include <linux/regmap.h>
 
 #include <media/v4l2-device.h>
 #include <media/v4l2-event.h>
@@ -16,6 +17,7 @@
 
 #include "sun6i_csi.h"
 #include "sun6i_csi_capture.h"
+#include "sun6i_csi_reg.h"
 
 /* This is got from BSP sources. */
 #define MIN_WIDTH      (32)
@@ -109,13 +111,41 @@ static void
 sun6i_csi_capture_buffer_configure(struct sun6i_csi_device *csi_dev,
                                   struct sun6i_csi_buffer *csi_buffer)
 {
+       struct regmap *regmap = csi_dev->regmap;
+       const struct v4l2_format_info *info;
        struct vb2_buffer *vb2_buffer;
+       unsigned int width, height;
        dma_addr_t address;
+       u32 pixelformat;
 
        vb2_buffer = &csi_buffer->v4l2_buffer.vb2_buf;
        address = vb2_dma_contig_plane_dma_addr(vb2_buffer, 0);
 
-       sun6i_csi_update_buf_addr(csi_dev, address);
+       regmap_write(regmap, SUN6I_CSI_CH_FIFO0_ADDR_REG,
+                    SUN6I_CSI_ADDR_VALUE(address));
+
+       sun6i_csi_capture_dimensions(csi_dev, &width, &height);
+       sun6i_csi_capture_format(csi_dev, &pixelformat, NULL);
+
+       info = v4l2_format_info(pixelformat);
+       /* Unsupported formats are single-plane, so we can stop here. */
+       if (!info)
+               return;
+
+       if (info->comp_planes > 1) {
+               address += info->bpp[0] * width * height;
+
+               regmap_write(regmap, SUN6I_CSI_CH_FIFO1_ADDR_REG,
+                            SUN6I_CSI_ADDR_VALUE(address));
+       }
+
+       if (info->comp_planes > 2) {
+               address += info->bpp[1] * DIV_ROUND_UP(width, info->hdiv) *
+                          DIV_ROUND_UP(height, info->vdiv);
+
+               regmap_write(regmap, SUN6I_CSI_CH_FIFO2_ADDR_REG,
+                            SUN6I_CSI_ADDR_VALUE(address));
+       }
 }
 
 static void sun6i_csi_capture_configure(struct sun6i_csi_device *csi_dev)