[media] mt2063: Add some debug printk's

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/common/tuners/mt2063.c b/drivers/media/common/tuners/mt2063.c
index 75cb1d2ccdbc4484d42c64411e6772cf4b6d0fb4..cd67417dc4cdae24caa31974d2ba128fa18eb0c6 100644 (file)
--- a/drivers/media/common/tuners/mt2063.c
+++ b/drivers/media/common/tuners/mt2063.c
@@ -27,8 +27,15 @@
 
 #include "mt2063.h"
 
-static unsigned int verbose;
-module_param(verbose, int, 0644);
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Set Verbosity level");
+
+#define dprintk(level, fmt, arg...) do {                               \
+if (debug >= level)                                                    \
+       printk(KERN_DEBUG "mt2063 %s: " fmt, __func__, ## arg); \
+} while (0)
+
 
 /* positive error codes used internally */
 
@@ -248,6 +255,8 @@ static u32 mt2063_write(struct mt2063_state *state, u8 reg, u8 *data, u32 len)
                .len = len + 1
        };
 
+       dprintk(2, "\n");
+
        msg.buf[0] = reg;
        memcpy(msg.buf + 1, data, len);
 
@@ -270,6 +279,8 @@ static u32 mt2063_setreg(struct mt2063_state *state, u8 reg, u8 val)
 {
        u32 status;
 
+       dprintk(2, "\n");
+
        if (reg >= MT2063_REG_END_REGS)
                return -ERANGE;
 
@@ -292,6 +303,8 @@ static u32 mt2063_read(struct mt2063_state *state,
        struct dvb_frontend *fe = state->frontend;
        u32 i = 0;
 
+       dprintk(2, "\n");
+
        if (fe->ops.i2c_gate_ctrl)
                fe->ops.i2c_gate_ctrl(fe, 1);
 
@@ -353,6 +366,9 @@ static struct MT2063_ExclZone_t *InsertNode(struct MT2063_AvoidSpursData_t
                                            struct MT2063_ExclZone_t *pPrevNode)
 {
        struct MT2063_ExclZone_t *pNode;
+
+       dprintk(2, "\n");
+
        /*  Check for a node in the free list  */
        if (pAS_Info->freeZones != NULL) {
                /*  Use one from the free list  */
@@ -384,6 +400,8 @@ static struct MT2063_ExclZone_t *RemoveNode(struct MT2063_AvoidSpursData_t
 {
        struct MT2063_ExclZone_t *pNext = pNodeToRemove->next_;
 
+       dprintk(2, "\n");
+
        /*  Make previous node point to the subsequent node  */
        if (pPrevNode != NULL)
                pPrevNode->next_ = pNext;
@@ -413,6 +431,8 @@ static void MT2063_AddExclZone(struct MT2063_AvoidSpursData_t *pAS_Info,
        struct MT2063_ExclZone_t *pPrev = NULL;
        struct MT2063_ExclZone_t *pNext = NULL;
 
+       dprintk(2, "\n");
+
        /*  Check to see if this overlaps the 1st IF filter  */
        if ((f_max > (pAS_Info->f_if1_Center - (pAS_Info->f_if1_bw / 2)))
            && (f_min < (pAS_Info->f_if1_Center + (pAS_Info->f_if1_bw / 2)))
@@ -462,6 +482,8 @@ static void MT2063_ResetExclZones(struct MT2063_AvoidSpursData_t *pAS_Info)
 {
        u32 center;
 
+       dprintk(2, "\n");
+
        pAS_Info->nZones = 0;   /*  this clears the used list  */
        pAS_Info->usedZones = NULL;     /*  reset ptr                  */
        pAS_Info->freeZones = NULL;     /*  reset ptr                  */
@@ -547,7 +569,6 @@ static u32 MT2063_ChooseFirstIF(struct MT2063_AvoidSpursData_t *pAS_Info)
             pAS_Info->f_LO2_Step) ? pAS_Info->f_LO1_Step : pAS_Info->
            f_LO2_Step;
        u32 f_Center;
-
        s32 i;
        s32 j = 0;
        u32 bDesiredExcluded = 0;
@@ -557,6 +578,8 @@ static u32 MT2063_ChooseFirstIF(struct MT2063_AvoidSpursData_t *pAS_Info)
        struct MT2063_ExclZone_t *pNode = pAS_Info->usedZones;
        struct MT2063_FIFZone_t zones[MT2063_MAX_ZONES];
 
+       dprintk(2, "\n");
+
        if (pAS_Info->nZones == 0)
                return f_Desired;
 
@@ -692,6 +715,9 @@ static u32 IsSpurInBand(struct MT2063_AvoidSpursData_t *pAS_Info,
        s32 f_Spur;
        u32 ma, mb, mc, md, me, mf;
        u32 lo_gcd, gd_Scale, gc_Scale, gf_Scale, hgds, hgfs, hgcs;
+
+       dprintk(2, "\n");
+
        *fm = 0;
 
        /*
@@ -788,6 +814,8 @@ static u32 MT2063_AvoidSpurs(struct MT2063_AvoidSpursData_t *pAS_Info)
        pAS_Info->bSpurAvoided = 0;
        pAS_Info->nSpursFound = 0;
 
+       dprintk(2, "\n");
+
        if (pAS_Info->maxH1 == 0)
                return 0;
 
@@ -910,6 +938,8 @@ static unsigned int mt2063_lockStatus(struct mt2063_state *state)
        u32 status;
        u32 nDelays = 0;
 
+       dprintk(2, "\n");
+
        /*  LO2 Lock bit was in a different place for B0 version  */
        if (state->tuner_id == MT2063_B0)
                LO2LK = 0x40;
@@ -1001,6 +1031,8 @@ static const u8 PD2TGT[] = { 40, 33, 38, 42, 30, 38 };
 static u32 mt2063_get_dnc_output_enable(struct mt2063_state *state,
                                        enum MT2063_DNC_Output_Enable *pValue)
 {
+       dprintk(2, "\n");
+
        if ((state->reg[MT2063_REG_DNC_GAIN] & 0x03) == 0x03) { /* if DNC1 is off */
                if ((state->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03)   /* if DNC2 is off */
                        *pValue = MT2063_DNC_NONE;
@@ -1024,6 +1056,8 @@ static u32 mt2063_set_dnc_output_enable(struct mt2063_state *state,
        u32 status = 0; /* Status to be returned        */
        u8 val = 0;
 
+       dprintk(2, "\n");
+
        /* selects, which DNC output is used */
        switch (nValue) {
        case MT2063_DNC_NONE:
@@ -1157,6 +1191,8 @@ static u32 MT2063_SetReceiverMode(struct mt2063_state *state,
        u8 val;
        u32 longval;
 
+       dprintk(2, "\n");
+
        if (Mode >= MT2063_NUM_RCVR_MODES)
                status = -ERANGE;
 
@@ -1292,6 +1328,7 @@ static u32 MT2063_ClearPowerMaskBits(struct mt2063_state *state,
 {
        u32 status = 0;
 
+       dprintk(2, "\n");
        Bits = (enum MT2063_Mask_Bits)(Bits & MT2063_ALL_SD);   /* Only valid bits for this tuner */
        if ((Bits & 0xFF00) != 0) {
                state->reg[MT2063_REG_PWR_2] &= ~(u8) (Bits >> 8);
@@ -1320,6 +1357,7 @@ static u32 MT2063_SoftwareShutdown(struct mt2063_state *state, u8 Shutdown)
 {
        u32 status;
 
+       dprintk(2, "\n");
        if (Shutdown == 1)
                state->reg[MT2063_REG_PWR_1] |= 0x04;
        else
@@ -1498,6 +1536,7 @@ static u32 MT2063_Tune(struct mt2063_state *state, u32 f_in)
        u8 val;
        u32 RFBand;
 
+       dprintk(2, "\n");
        /*  Check the input and output frequency ranges                   */
        if ((f_in < MT2063_MIN_FIN_FREQ) || (f_in > MT2063_MAX_FIN_FREQ))
                return -EINVAL;
@@ -1757,12 +1796,16 @@ static int mt2063_init(struct dvb_frontend *fe)
        u32 fcu_osc;
        u32 i;
 
+       dprintk(2, "\n");
+
        state->rcvr_mode = MT2063_CABLE_QAM;
 
        /*  Read the Part/Rev code from the tuner */
        status = mt2063_read(state, MT2063_REG_PART_REV, state->reg, 1);
-       if (status < 0)
+       if (status < 0) {
+               printk(KERN_ERR "Can't read mt2063 part ID\n");
                return status;
+       }
 
        /* Check the part/rev code */
        if (((state->reg[MT2063_REG_PART_REV] != MT2063_B0)     /*  MT2063 B0  */
@@ -1775,8 +1818,10 @@ static int mt2063_init(struct dvb_frontend *fe)
                             &state->reg[MT2063_REG_RSVD_3B], 1);
 
        /* b7 != 0 ==> NOT MT2063 */
-       if (status < 0 || ((state->reg[MT2063_REG_RSVD_3B] & 0x80) != 0x00))
+       if (status < 0 || ((state->reg[MT2063_REG_RSVD_3B] & 0x80) != 0x00)) {
+               printk(KERN_ERR "Can't read mt2063 2nd part ID\n");
                return -ENODEV; /*  Wrong tuner Part/Rev code */
+       }
 
        /*  Reset the tuner  */
        status = mt2063_write(state, MT2063_REG_LO2CQ_3, &all_resets, 1);
@@ -1940,6 +1985,8 @@ static int mt2063_get_status(struct dvb_frontend *fe, u32 *tuner_status)
        struct mt2063_state *state = fe->tuner_priv;
        int status;
 
+       dprintk(2, "\n");
+
        *tuner_status = 0;
        status = mt2063_lockStatus(state);
        if (status < 0)
@@ -1954,6 +2001,8 @@ static int mt2063_release(struct dvb_frontend *fe)
 {
        struct mt2063_state *state = fe->tuner_priv;
 
+       dprintk(2, "\n");
+
        fe->tuner_priv = NULL;
        kfree(state);
 
@@ -1974,6 +2023,8 @@ static int mt2063_set_analog_params(struct dvb_frontend *fe,
        s32 rcvr_mode = 0;
        int status;
 
+       dprintk(2, "\n");
+
        switch (params->mode) {
        case V4L2_TUNER_RADIO:
                pict_car = 38900000;
@@ -2065,6 +2116,8 @@ static int mt2063_set_params(struct dvb_frontend *fe)
        s32 if_mid = 0;
        s32 rcvr_mode = 0;
 
+       dprintk(2, "\n");
+
        if (c->bandwidth_hz == 0)
                return -EINVAL;
        if (c->bandwidth_hz <= 6000000)
@@ -2116,6 +2169,8 @@ static int mt2063_get_frequency(struct dvb_frontend *fe, u32 *freq)
 {
        struct mt2063_state *state = fe->tuner_priv;
 
+       dprintk(2, "\n");
+
        *freq = state->frequency;
        return 0;
 }
@@ -2124,6 +2179,8 @@ static int mt2063_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
 {
        struct mt2063_state *state = fe->tuner_priv;
 
+       dprintk(2, "\n");
+
        *bw = state->AS_Data.f_out_bw - 750000;
        return 0;
 }
@@ -2152,6 +2209,8 @@ struct dvb_frontend *mt2063_attach(struct dvb_frontend *fe,
 {
        struct mt2063_state *state = NULL;
 
+       dprintk(2, "\n");
+
        state = kzalloc(sizeof(struct mt2063_state), GFP_KERNEL);
        if (state == NULL)
                goto error;
@@ -2181,6 +2240,8 @@ unsigned int tuner_MT2063_SoftwareShutdown(struct dvb_frontend *fe)
        struct mt2063_state *state = fe->tuner_priv;
        int err = 0;
 
+       dprintk(2, "\n");
+
        err = MT2063_SoftwareShutdown(state, 1);
        if (err < 0)
                printk(KERN_ERR "%s: Couldn't shutdown\n", __func__);
@@ -2194,6 +2255,8 @@ unsigned int tuner_MT2063_ClearPowerMaskBits(struct dvb_frontend *fe)
        struct mt2063_state *state = fe->tuner_priv;
        int err = 0;
 
+       dprintk(2, "\n");
+
        err = MT2063_ClearPowerMaskBits(state, MT2063_ALL_SD);
        if (err < 0)
                printk(KERN_ERR "%s: Invalid parameter\n", __func__);
@@ -2202,9 +2265,6 @@ unsigned int tuner_MT2063_ClearPowerMaskBits(struct dvb_frontend *fe)
 }
 EXPORT_SYMBOL_GPL(tuner_MT2063_ClearPowerMaskBits);
 
-
-MODULE_PARM_DESC(verbose, "Set Verbosity level");
-
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
 MODULE_DESCRIPTION("MT2063 Silicon tuner");
 MODULE_LICENSE("GPL");