sata_rcar: Reset SATA PHY when Salvator-X board resumes

Because power of Salvator-X board is cut off in suspend,
it needs to reset SATA PHY state in resume.
Otherwise, SATA partition could not be accessed anymore.

Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
Signed-off-by: Hien Dang <hien.dang.eb@rvc.renesas.com>
[reinit phy in sata_rcar_resume() function on R-Car Gen3 only]
[factor out SATA module init sequence]
[fixed the prefix for the subject]
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 80ee2f2a50d02872a9b657e99d320ac7dfe2cc5a..6f47ca34767d74fea711ec3951e170211baf06d4 100644 (file)
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -146,6 +146,7 @@
 enum sata_rcar_type {
        RCAR_GEN1_SATA,
        RCAR_GEN2_SATA,
+       RCAR_GEN3_SATA,
        RCAR_R8A7790_ES1_SATA,
 };
 
@@ -784,26 +785,11 @@ static void sata_rcar_setup_port(struct ata_host *host)
        ioaddr->command_addr    = ioaddr->cmd_addr + (ATA_REG_CMD << 2);
 }
 
-static void sata_rcar_init_controller(struct ata_host *host)
+static void sata_rcar_init_module(struct sata_rcar_priv *priv)
 {
-       struct sata_rcar_priv *priv = host->private_data;
        void __iomem *base = priv->base;
        u32 val;
 
-       /* reset and setup phy */
-       switch (priv->type) {
-       case RCAR_GEN1_SATA:
-               sata_rcar_gen1_phy_init(priv);
-               break;
-       case RCAR_GEN2_SATA:
-       case RCAR_R8A7790_ES1_SATA:
-               sata_rcar_gen2_phy_init(priv);
-               break;
-       default:
-               dev_warn(host->dev, "SATA phy is not initialized\n");
-               break;
-       }
-
        /* SATA-IP reset state */
        val = ioread32(base + ATAPI_CONTROL1_REG);
        val |= ATAPI_CONTROL1_RESET;
@@ -824,10 +810,34 @@ static void sata_rcar_init_controller(struct ata_host *host)
        /* ack and mask */
        iowrite32(0, base + SATAINTSTAT_REG);
        iowrite32(0x7ff, base + SATAINTMASK_REG);
+
        /* enable interrupts */
        iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
 }
 
+static void sata_rcar_init_controller(struct ata_host *host)
+{
+       struct sata_rcar_priv *priv = host->private_data;
+       void __iomem *base = priv->base;
+
+       /* reset and setup phy */
+       switch (priv->type) {
+       case RCAR_GEN1_SATA:
+               sata_rcar_gen1_phy_init(priv);
+               break;
+       case RCAR_GEN2_SATA:
+       case RCAR_GEN3_SATA:
+       case RCAR_R8A7790_ES1_SATA:
+               sata_rcar_gen2_phy_init(priv);
+               break;
+       default:
+               dev_warn(host->dev, "SATA phy is not initialized\n");
+               break;
+       }
+
+       sata_rcar_init_module(priv);
+}
+
 static const struct of_device_id sata_rcar_match[] = {
        {
                /* Deprecated by "renesas,sata-r8a7779" */
@@ -856,7 +866,7 @@ static const struct of_device_id sata_rcar_match[] = {
        },
        {
                .compatible = "renesas,sata-r8a7795",
-               .data = (void *)RCAR_GEN2_SATA
+               .data = (void *)RCAR_GEN3_SATA
        },
        {
                .compatible = "renesas,rcar-gen2-sata",
@@ -864,7 +874,7 @@ static const struct of_device_id sata_rcar_match[] = {
        },
        {
                .compatible = "renesas,rcar-gen3-sata",
-               .data = (void *)RCAR_GEN2_SATA
+               .data = (void *)RCAR_GEN3_SATA
        },
        { },
 };
@@ -982,11 +992,18 @@ static int sata_rcar_resume(struct device *dev)
        if (ret)
                return ret;
 
-       /* ack and mask */
-       iowrite32(0, base + SATAINTSTAT_REG);
-       iowrite32(0x7ff, base + SATAINTMASK_REG);
-       /* enable interrupts */
-       iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
+       if (priv->type == RCAR_GEN3_SATA) {
+               sata_rcar_gen2_phy_init(priv);
+               sata_rcar_init_module(priv);
+       } else {
+               /* ack and mask */
+               iowrite32(0, base + SATAINTSTAT_REG);
+               iowrite32(0x7ff, base + SATAINTMASK_REG);
+
+               /* enable interrupts */
+               iowrite32(ATAPI_INT_ENABLE_SATAINT,
+                         base + ATAPI_INT_ENABLE_REG);
+       }
 
        ata_host_resume(host);