serial: sh-sci: Support icount statistics for error cases.

Presently the icount stats are only adjusted for the rx/tx case, this
makes sure that they're updated appropriately for the non-tx/rx cases,
too (specifically overruns, breaks, as well as frame and parity errors).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index c13910587bc3080b66cc6e0ea695ada4b767adee..3bea91b3a6f1813eeaa2d5863d73802caf67ea08 100644 (file)
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -621,6 +621,7 @@ static void sci_receive_chars(struct uart_port *port)
                } else {
                        for (i = 0; i < count; i++) {
                                char c = sci_in(port, SCxRDR);
+
                                status = sci_in(port, SCxSR);
 #if defined(CONFIG_CPU_SH3)
                                /* Skip "chars" during break */
@@ -649,9 +650,11 @@ static void sci_receive_chars(struct uart_port *port)
                                /* Store data and status */
                                if (status & SCxSR_FER(port)) {
                                        flag = TTY_FRAME;
+                                       port->icount.frame++;
                                        dev_notice(port->dev, "frame error\n");
                                } else if (status & SCxSR_PER(port)) {
                                        flag = TTY_PARITY;
+                                       port->icount.parity++;
                                        dev_notice(port->dev, "parity error\n");
                                } else
                                        flag = TTY_NORMAL;
@@ -723,6 +726,8 @@ static int sci_handle_errors(struct uart_port *port)
         */
        if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
                if (status & (1 << s->cfg->overrun_bit)) {
+                       port->icount.overrun++;
+
                        /* overrun error */
                        if (tty_insert_flip_char(tty, 0, TTY_OVERRUN))
                                copied++;
@@ -737,6 +742,8 @@ static int sci_handle_errors(struct uart_port *port)
                        struct sci_port *sci_port = to_sci_port(port);
 
                        if (!sci_port->break_flag) {
+                               port->icount.brk++;
+
                                sci_port->break_flag = 1;
                                sci_schedule_break_timer(sci_port);
 
@@ -752,6 +759,8 @@ static int sci_handle_errors(struct uart_port *port)
 
                } else {
                        /* frame error */
+                       port->icount.frame++;
+
                        if (tty_insert_flip_char(tty, 0, TTY_FRAME))
                                copied++;
 
@@ -761,6 +770,8 @@ static int sci_handle_errors(struct uart_port *port)
 
        if (status & SCxSR_PER(port)) {
                /* parity error */
+               port->icount.parity++;
+
                if (tty_insert_flip_char(tty, 0, TTY_PARITY))
                        copied++;
 
@@ -787,6 +798,8 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
        if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
                sci_out(port, SCLSR, 0);
 
+               port->icount.overrun++;
+
                tty_insert_flip_char(tty, 0, TTY_OVERRUN);
                tty_flip_buffer_push(tty);
 
@@ -812,6 +825,9 @@ static int sci_handle_breaks(struct uart_port *port)
                /* Debounce break */
                s->break_flag = 1;
 #endif
+
+               port->icount.brk++;
+
                /* Notify of BREAK */
                if (tty_insert_flip_char(tty, 0, TTY_BREAK))
                        copied++;