config ARM64
def_bool y
+ select ACPI_GENERIC_GSI if ACPI
select ACPI_REDUCED_HARDWARE_ONLY if ACPI
select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
return 0;
}
-/*
- * Since we're on ARM, the default interrupt routing model
- * clearly has to be GIC.
- */
-enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC;
-
/*
* __acpi_map_table() will be called before page_init(), so early_ioremap()
* or early_memremap() should be called here to for ACPI table mapping.
pr_info("%d CPUs enabled, %d CPUs total\n", enabled_cpus, total_cpus);
}
-int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
-{
- *irq = irq_find_mapping(NULL, gsi);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
-
-/*
- * success: return IRQ number (>0)
- * failure: return =< 0
- */
-int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
-{
- unsigned int irq;
- unsigned int irq_type;
-
- /*
- * ACPI have no bindings to indicate SPI or PPI, so we
- * use different mappings from DT in ACPI.
- *
- * For FDT
- * PPI interrupt: in the range [0, 15];
- * SPI interrupt: in the range [0, 987];
- *
- * For ACPI, GSI should be unique so using
- * the hwirq directly for the mapping:
- * PPI interrupt: in the range [16, 31];
- * SPI interrupt: in the range [32, 1019];
- */
-
- if (trigger == ACPI_EDGE_SENSITIVE &&
- polarity == ACPI_ACTIVE_LOW)
- irq_type = IRQ_TYPE_EDGE_FALLING;
- else if (trigger == ACPI_EDGE_SENSITIVE &&
- polarity == ACPI_ACTIVE_HIGH)
- irq_type = IRQ_TYPE_EDGE_RISING;
- else if (trigger == ACPI_LEVEL_SENSITIVE &&
- polarity == ACPI_ACTIVE_LOW)
- irq_type = IRQ_TYPE_LEVEL_LOW;
- else if (trigger == ACPI_LEVEL_SENSITIVE &&
- polarity == ACPI_ACTIVE_HIGH)
- irq_type = IRQ_TYPE_LEVEL_HIGH;
- else
- irq_type = IRQ_TYPE_NONE;
-
- /*
- * Since only one GIC is supported in ACPI 5.0, we can
- * create mapping refer to the default domain
- */
- irq = irq_create_mapping(NULL, gsi);
- if (!irq)
- return irq;
-
- /* Set irq type if specified and different than the current one */
- if (irq_type != IRQ_TYPE_NONE &&
- irq_type != irq_get_trigger_type(irq))
- irq_set_irq_type(irq, irq_type);
- return irq;
-}
-EXPORT_SYMBOL_GPL(acpi_register_gsi);
-
-void acpi_unregister_gsi(u32 gsi)
-{
-}
-EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
-
static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
struct acpi_table_fadt *fadt = (struct acpi_table_fadt *)table;
config ARCH_MIGHT_HAVE_ACPI_PDC
bool
+config ACPI_GENERIC_GSI
+ bool
+
config ACPI_SYSTEM_POWER_STATES_SUPPORT
bool
acpi-y += video_detect.o
endif
acpi-y += acpi_lpat.o
+acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o
# These are (potentially) separate modules
--- /dev/null
+/*
+ * ACPI GSI IRQ layer
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/acpi.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+
+enum acpi_irq_model_id acpi_irq_model;
+
+static unsigned int acpi_gsi_get_irq_type(int trigger, int polarity)
+{
+ switch (polarity) {
+ case ACPI_ACTIVE_LOW:
+ return trigger == ACPI_EDGE_SENSITIVE ?
+ IRQ_TYPE_EDGE_FALLING :
+ IRQ_TYPE_LEVEL_LOW;
+ case ACPI_ACTIVE_HIGH:
+ return trigger == ACPI_EDGE_SENSITIVE ?
+ IRQ_TYPE_EDGE_RISING :
+ IRQ_TYPE_LEVEL_HIGH;
+ case ACPI_ACTIVE_BOTH:
+ if (trigger == ACPI_EDGE_SENSITIVE)
+ return IRQ_TYPE_EDGE_BOTH;
+ default:
+ return IRQ_TYPE_NONE;
+ }
+}
+
+/**
+ * acpi_gsi_to_irq() - Retrieve the linux irq number for a given GSI
+ * @gsi: GSI IRQ number to map
+ * @irq: pointer where linux IRQ number is stored
+ *
+ * irq location updated with irq value [>0 on success, 0 on failure]
+ *
+ * Returns: linux IRQ number on success (>0)
+ * -EINVAL on failure
+ */
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+ /*
+ * Only default domain is supported at present, always find
+ * the mapping corresponding to default domain by passing NULL
+ * as irq_domain parameter
+ */
+ *irq = irq_find_mapping(NULL, gsi);
+ /*
+ * *irq == 0 means no mapping, that should
+ * be reported as a failure
+ */
+ return (*irq > 0) ? *irq : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
+
+/**
+ * acpi_register_gsi() - Map a GSI to a linux IRQ number
+ * @dev: device for which IRQ has to be mapped
+ * @gsi: GSI IRQ number
+ * @trigger: trigger type of the GSI number to be mapped
+ * @polarity: polarity of the GSI to be mapped
+ *
+ * Returns: a valid linux IRQ number on success
+ * -EINVAL on failure
+ */
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger,
+ int polarity)
+{
+ unsigned int irq;
+ unsigned int irq_type = acpi_gsi_get_irq_type(trigger, polarity);
+
+ /*
+ * There is no way at present to look-up the IRQ domain on ACPI,
+ * hence always create mapping referring to the default domain
+ * by passing NULL as irq_domain parameter
+ */
+ irq = irq_create_mapping(NULL, gsi);
+ if (!irq)
+ return -EINVAL;
+
+ /* Set irq type if specified and different than the current one */
+ if (irq_type != IRQ_TYPE_NONE &&
+ irq_type != irq_get_trigger_type(irq))
+ irq_set_irq_type(irq, irq_type);
+ return irq;
+}
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+/**
+ * acpi_unregister_gsi() - Free a GSI<->linux IRQ number mapping
+ * @gsi: GSI IRQ number
+ */
+void acpi_unregister_gsi(u32 gsi)
+{
+ int irq = irq_find_mapping(NULL, gsi);
+
+ irq_dispose_mapping(irq);
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
*/
gic_init_bases(0, -1, dist_base, cpu_base, 0, NULL);
irq_set_default_host(gic_data[0].domain);
+
+ acpi_irq_model = ACPI_IRQ_MODEL_GIC;
return 0;
}
#endif
projects / linux.git / commitdiff