* Get attributes for incrementing the System Time Register SYSTIML/H at
* the default base frequency, and set the cyclecounter shift value.
**/
-static s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
+s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
{
struct e1000_hw *hw = &adapter->hw;
u32 incvalue, incperiod, shift;
struct hwtstamp_config *config = &adapter->hwtstamp_config;
u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ u32 rxmtrl = 0;
+ u16 rxudp = 0;
+ bool is_l4 = false;
+ bool is_l2 = false;
u32 regval;
s32 ret_val;
case HWTSTAMP_FILTER_NONE:
tsync_rx_ctl = 0;
break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+ rxmtrl = E1000_RXMTRL_PTP_V1_SYNC_MESSAGE;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+ rxmtrl = E1000_RXMTRL_PTP_V1_DELAY_REQ_MESSAGE;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ /* Also time stamps V2 L2 Path Delay Request/Response */
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
+ rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
+ is_l2 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ /* Also time stamps V2 L2 Path Delay Request/Response. */
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_V2;
+ rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
+ is_l2 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ /* Hardware cannot filter just V2 L4 Sync messages;
+ * fall-through to V2 (both L2 and L4) Sync.
+ */
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ /* Also time stamps V2 Path Delay Request/Response. */
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+ rxmtrl = E1000_RXMTRL_PTP_V2_SYNC_MESSAGE;
+ is_l2 = true;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ /* Hardware cannot filter just V2 L4 Delay Request messages;
+ * fall-through to V2 (both L2 and L4) Delay Request.
+ */
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ /* Also time stamps V2 Path Delay Request/Response. */
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+ rxmtrl = E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE;
+ is_l2 = true;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ /* Hardware cannot filter just V2 L4 or L2 Event messages;
+ * fall-through to all V2 (both L2 and L4) Events.
+ */
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+ config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+ is_l2 = true;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ /* For V1, the hardware can only filter Sync messages or
+ * Delay Request messages but not both so fall-through to
+ * time stamp all packets.
+ */
case HWTSTAMP_FILTER_ALL:
+ is_l2 = true;
+ is_l4 = true;
tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
config->rx_filter = HWTSTAMP_FILTER_ALL;
break;
return -EAGAIN;
}
+ /* L2: define ethertype filter for time stamped packets */
+ if (is_l2)
+ rxmtrl |= ETH_P_1588;
+
+ /* define which PTP packets get time stamped */
+ ew32(RXMTRL, rxmtrl);
+
+ /* Filter by destination port */
+ if (is_l4) {
+ rxudp = PTP_EV_PORT;
+ cpu_to_be16s(&rxudp);
+ }
+ ew32(RXUDP, rxudp);
+
+ e1e_flush();
+
/* Clear TSYNCRXCTL_VALID & TSYNCTXCTL_VALID bit */
regval = er32(RXSTMPH);
regval = er32(TXSTMPH);
config = adapter->hwtstamp_config;
+ switch (config.rx_filter) {
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ /* With V2 type filters which specify a Sync or Delay Request,
+ * Path Delay Request/Response messages are also time stamped
+ * by hardware so notify the caller the requested packets plus
+ * some others are time stamped.
+ */
+ config.rx_filter = HWTSTAMP_FILTER_SOME;
+ break;
+ default:
+ break;
+ }
+
return copy_to_user(ifr->ifr_data, &config,
sizeof(config)) ? -EFAULT : 0;
}
/* carrier off reporting is important to ethtool even BEFORE open */
netif_carrier_off(netdev);
+ /* init PTP hardware clock */
+ e1000e_ptp_init(adapter);
+
e1000_print_device_info(adapter);
if (pci_dev_run_wake(pdev))
struct e1000_adapter *adapter = netdev_priv(netdev);
bool down = test_bit(__E1000_DOWN, &adapter->state);
+ e1000e_ptp_remove(adapter);
+
/* The timers may be rescheduled, so explicitly disable them
* from being rescheduled.
*/
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* PTP 1588 Hardware Clock (PHC)
+ * Derived from PTP Hardware Clock driver for Intel 82576 and 82580 (igb)
+ * Copyright (C) 2011 Richard Cochran <richardcochran@gmail.com>
+ */
+
+#include "e1000.h"
+
+/**
+ * e1000e_phc_adjfreq - adjust the frequency of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired frequency change in parts per billion
+ *
+ * Adjust the frequency of the PHC cycle counter by the indicated delta from
+ * the base frequency.
+ **/
+static int e1000e_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta)
+{
+ struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+ ptp_clock_info);
+ struct e1000_hw *hw = &adapter->hw;
+ bool neg_adj = false;
+ u64 adjustment;
+ u32 timinca, incvalue;
+ s32 ret_val;
+
+ if ((delta > ptp->max_adj) || (delta <= -1000000000))
+ return -EINVAL;
+
+ if (delta < 0) {
+ neg_adj = true;
+ delta = -delta;
+ }
+
+ /* Get the System Time Register SYSTIM base frequency */
+ ret_val = e1000e_get_base_timinca(adapter, &timinca);
+ if (ret_val)
+ return ret_val;
+
+ incvalue = timinca & E1000_TIMINCA_INCVALUE_MASK;
+
+ adjustment = incvalue;
+ adjustment *= delta;
+ adjustment = div_u64(adjustment, 1000000000);
+
+ incvalue = neg_adj ? (incvalue - adjustment) : (incvalue + adjustment);
+
+ timinca &= ~E1000_TIMINCA_INCVALUE_MASK;
+ timinca |= incvalue;
+
+ ew32(TIMINCA, timinca);
+
+ return 0;
+}
+
+/**
+ * e1000e_phc_adjtime - Shift the time of the hardware clock
+ * @ptp: ptp clock structure
+ * @delta: Desired change in nanoseconds
+ *
+ * Adjust the timer by resetting the timecounter structure.
+ **/
+static int e1000e_phc_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+ ptp_clock_info);
+ unsigned long flags;
+ s64 now;
+
+ spin_lock_irqsave(&adapter->systim_lock, flags);
+ now = timecounter_read(&adapter->tc);
+ now += delta;
+ timecounter_init(&adapter->tc, &adapter->cc, now);
+ spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+ return 0;
+}
+
+/**
+ * e1000e_phc_gettime - Reads the current time from the hardware clock
+ * @ptp: ptp clock structure
+ * @ts: timespec structure to hold the current time value
+ *
+ * Read the timecounter and return the correct value in ns after converting
+ * it into a struct timespec.
+ **/
+static int e1000e_phc_gettime(struct ptp_clock_info *ptp, struct timespec *ts)
+{
+ struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+ ptp_clock_info);
+ unsigned long flags;
+ u32 remainder;
+ u64 ns;
+
+ spin_lock_irqsave(&adapter->systim_lock, flags);
+ ns = timecounter_read(&adapter->tc);
+ spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+ ts->tv_sec = div_u64_rem(ns, NSEC_PER_SEC, &remainder);
+ ts->tv_nsec = remainder;
+
+ return 0;
+}
+
+/**
+ * e1000e_phc_settime - Set the current time on the hardware clock
+ * @ptp: ptp clock structure
+ * @ts: timespec containing the new time for the cycle counter
+ *
+ * Reset the timecounter to use a new base value instead of the kernel
+ * wall timer value.
+ **/
+static int e1000e_phc_settime(struct ptp_clock_info *ptp,
+ const struct timespec *ts)
+{
+ struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
+ ptp_clock_info);
+ unsigned long flags;
+ u64 ns;
+
+ ns = ts->tv_sec * NSEC_PER_SEC;
+ ns += ts->tv_nsec;
+
+ /* reset the timecounter */
+ spin_lock_irqsave(&adapter->systim_lock, flags);
+ timecounter_init(&adapter->tc, &adapter->cc, ns);
+ spin_unlock_irqrestore(&adapter->systim_lock, flags);
+
+ return 0;
+}
+
+/**
+ * e1000e_phc_enable - enable or disable an ancillary feature
+ * @ptp: ptp clock structure
+ * @request: Desired resource to enable or disable
+ * @on: Caller passes one to enable or zero to disable
+ *
+ * Enable (or disable) ancillary features of the PHC subsystem.
+ * Currently, no ancillary features are supported.
+ **/
+static int e1000e_phc_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *request, int on)
+{
+ return -EOPNOTSUPP;
+}
+
+static void e1000e_systim_overflow_work(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work, struct e1000_adapter,
+ systim_overflow_work.work);
+ struct e1000_hw *hw = &adapter->hw;
+ struct timespec ts;
+
+ adapter->ptp_clock_info.gettime(&adapter->ptp_clock_info, &ts);
+
+ e_dbg("SYSTIM overflow check at %ld.%09lu\n", ts.tv_sec, ts.tv_nsec);
+
+ schedule_delayed_work(&adapter->systim_overflow_work,
+ E1000_SYSTIM_OVERFLOW_PERIOD);
+}
+
+static const struct ptp_clock_info e1000e_ptp_clock_info = {
+ .owner = THIS_MODULE,
+ .n_alarm = 0,
+ .n_ext_ts = 0,
+ .n_per_out = 0,
+ .pps = 0,
+ .adjfreq = e1000e_phc_adjfreq,
+ .adjtime = e1000e_phc_adjtime,
+ .gettime = e1000e_phc_gettime,
+ .settime = e1000e_phc_settime,
+ .enable = e1000e_phc_enable,
+};
+
+/**
+ * e1000e_ptp_init - initialize PTP for devices which support it
+ * @adapter: board private structure
+ *
+ * This function performs the required steps for enabling PTP support.
+ * If PTP support has already been loaded it simply calls the cyclecounter
+ * init routine and exits.
+ **/
+void e1000e_ptp_init(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->ptp_clock = NULL;
+
+ if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+ return;
+
+ adapter->ptp_clock_info = e1000e_ptp_clock_info;
+
+ snprintf(adapter->ptp_clock_info.name,
+ sizeof(adapter->ptp_clock_info.name), "%pm",
+ adapter->netdev->perm_addr);
+
+ switch (hw->mac.type) {
+ case e1000_pch2lan:
+ case e1000_pch_lpt:
+ if ((hw->mac.type != e1000_pch_lpt) ||
+ (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
+ adapter->ptp_clock_info.max_adj = 24000000 - 1;
+ break;
+ }
+ /* fall-through */
+ case e1000_82574:
+ case e1000_82583:
+ adapter->ptp_clock_info.max_adj = 600000000 - 1;
+ break;
+ default:
+ break;
+ }
+
+ INIT_DELAYED_WORK(&adapter->systim_overflow_work,
+ e1000e_systim_overflow_work);
+
+ schedule_delayed_work(&adapter->systim_overflow_work,
+ E1000_SYSTIM_OVERFLOW_PERIOD);
+
+ adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info,
+ &adapter->pdev->dev);
+ if (IS_ERR(adapter->ptp_clock)) {
+ adapter->ptp_clock = NULL;
+ e_err("ptp_clock_register failed\n");
+ } else {
+ e_info("registered PHC clock\n");
+ }
+}
+
+/**
+ * e1000e_ptp_remove - disable PTP device and stop the overflow check
+ * @adapter: board private structure
+ *
+ * Stop the PTP support, and cancel the delayed work.
+ **/
+void e1000e_ptp_remove(struct e1000_adapter *adapter)
+{
+ if (!(adapter->flags & FLAG_HAS_HW_TIMESTAMP))
+ return;
+
+ cancel_delayed_work_sync(&adapter->systim_overflow_work);
+
+ if (adapter->ptp_clock) {
+ ptp_clock_unregister(adapter->ptp_clock);
+ adapter->ptp_clock = NULL;
+ e_info("removed PHC\n");
+ }
+}
projects / users / hch / configfs.git / commitdiff