net: dsa: mv88e6xxx: Provide function for common port initialization

Provide mv88e6xxx_setup_port_common() for common port initialization.
Currently only write Port 1 Control and VLAN configuration since
this will be needed for hardware bridging. More can be added later
if desired/needed.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index 6496beb74510ab0d7bedb9dfb7d9fe3fbdcafc19..2052e51edd5db8c2552d1f1d9e15fa112c48f398 100644 (file)
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -700,6 +700,45 @@ int mv88e6xxx_set_eee(struct dsa_switch *ds, int port,
        return 0;
 }
 
+int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port)
+{
+       struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+       int ret, reg;
+
+       mutex_lock(&ps->smi_mutex);
+
+       /* Port Control 1: disable trunking.  Also, if this is the
+        * CPU port, enable learn messages to be sent to this port.
+        */
+       ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), 0x05,
+                                  dsa_is_cpu_port(ds, port) ? 0x8000 : 0x0000);
+       if (ret)
+               goto abort;
+
+       /* Port based VLAN map: give each port its own address
+        * database, allow the CPU port to talk to each of the 'real'
+        * ports, and allow each of the 'real' ports to only talk to
+        * the upstream port.
+        */
+       reg = (port & 0xf) << 12;
+       if (dsa_is_cpu_port(ds, port))
+               reg |= ds->phys_port_mask;
+       else
+               reg |= 1 << dsa_upstream_port(ds);
+
+       ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), 0x06, reg);
+       if (ret)
+               goto abort;
+
+       /* Default VLAN ID and priority: don't set a default VLAN
+        * ID, and set the default packet priority to zero.
+        */
+       ret = _mv88e6xxx_reg_write(ds, REG_PORT(port), 0x07, 0x0000);
+abort:
+       mutex_unlock(&ps->smi_mutex);
+       return ret;
+}
+
 int mv88e6xxx_setup_common(struct dsa_switch *ds)
 {
        struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);

diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h
index a02d95a9b31384b8a891416c3fe6ea36ae2ebe6a..a4df4968594ef03d4179f883a8318aad25be6b07 100644 (file)
--- a/drivers/net/dsa/mv88e6xxx.h
+++ b/drivers/net/dsa/mv88e6xxx.h
@@ -57,6 +57,7 @@ struct mv88e6xxx_hw_stat {
        int reg;
 };
 
+int mv88e6xxx_setup_port_common(struct dsa_switch *ds, int port);
 int mv88e6xxx_setup_common(struct dsa_switch *ds);
 int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg);
 int mv88e6xxx_reg_read(struct dsa_switch *ds, int addr, int reg);