phy: qcom-qmp-ufs: check for mode type for phy setting

Generally all target supports Rate B but for very few like SM8550,
two sets of UFS PHY settings are provided, one set is to support
HS-G5 Rate A and another set is to support HS-G4 and lower
gears with Rate B.

Commit b02cc9a17679("phy: qcom-qmp-ufs: Add PHY Configuration support
for sm8750") apply Rate B setting for SM8550 gear 5 without checking
for mode value (Rate A or Rate B) from Controller driver which caused
issue as SM8550 support rate A for Gear 5.

Fix this by adding mode check before applying Rat B phy setting.

Fixes: b02cc9a17679 ("phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/all/430ed11c-0490-45be-897b-27cad9682371@quicinc.com/
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250407121008.22230-1-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 45b3b792696e9ed17ca9dedcf8e71202d27e86a2..b33e2e2b5014d3ca8f19b623ba080887f53e616d 100644 (file)
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -1754,7 +1754,8 @@ static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg
                qmp_ufs_init_all(qmp, &cfg->tbls_hs_overlay[i]);
        }
 
-       qmp_ufs_init_all(qmp, &cfg->tbls_hs_b);
+       if (qmp->mode == PHY_MODE_UFS_HS_B)
+               qmp_ufs_init_all(qmp, &cfg->tbls_hs_b);
 }
 
 static int qmp_ufs_com_init(struct qmp_ufs *qmp)