arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers

Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.

Fixes: 0420dde30a90 ("arm64: dts: ls208xa: add the external MDIO nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index f1b9cc8714dc0b40722583f28cc3cf40e156cb0a..348d9e3a91252cfde1323b0b2c42166d2868f112 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -532,6 +532,9 @@
                        little-endian;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       clock-frequency = <2500000>;
+                       clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+                                           QORIQ_CLK_PLL_DIV(2)>;
                        status = "disabled";
                };
 
@@ -541,6 +544,9 @@
                        little-endian;
                        #address-cells = <1>;
                        #size-cells = <0>;
+                       clock-frequency = <2500000>;
+                       clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+                                           QORIQ_CLK_PLL_DIV(2)>;
                        status = "disabled";
                };