RISC-V: Resurrect the MMIO timer implementation for M-mode systems

The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs
in the NOMMU systems that means we can't use rdtime.  The K210 is the only
system that anyone is currently running NOMMU or M-mode on, so here we're just
inlining the timer read directly.

This also adds the CLINT driver as an !MMU dependency, as it's currently the
only timer driver availiable for these systems and without it we get a build
failure for some configurations.

Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index df18372861d8d22e3c0f6b8485c6128c65de733b..7766e1289468bfee07d5b6d7940f3aa3c2bcfab7 100644 (file)
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -32,6 +32,7 @@ config RISCV
        select ARCH_WANT_FRAME_POINTERS
        select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
        select CLONE_BACKWARDS
+       select CLINT_TIMER if !MMU
        select COMMON_CLK
        select EDAC_SUPPORT
        select GENERIC_ARCH_TOPOLOGY if SMP

diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
new file mode 100644 (file)
index 0000000..0789fd3
--- /dev/null
+++ b/arch/riscv/include/asm/clint.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Google, Inc
+ */
+
+#ifndef _ASM_RISCV_CLINT_H
+#define _ASM_RISCV_CLINT_H
+
+#include <linux/types.h>
+#include <asm/mmio.h>
+
+#ifdef CONFIG_RISCV_M_MODE
+/*
+ * This lives in the CLINT driver, but is accessed directly by timex.h to avoid
+ * any overhead when accessing the MMIO timer.
+ *
+ * The ISA defines mtime as a 64-bit memory-mapped register that increments at
+ * a constant frequency, but it doesn't define some other constraints we depend
+ * on (most notably ordering constraints, but also some simpler stuff like the
+ * memory layout).  Thus, this is called "clint_time_val" instead of something
+ * like "riscv_mtime", to signify that these non-ISA assumptions must hold.
+ */
+extern u64 __iomem *clint_time_val;
+#endif
+
+#endif

diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index a3fb85d505d44fada43cc15625b2f007783e9025..7f659dda003230d7702134dcb29054a42488c229 100644 (file)
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -10,6 +10,31 @@
 
 typedef unsigned long cycles_t;
 
+#ifdef CONFIG_RISCV_M_MODE
+
+#include <asm/clint.h>
+
+#ifdef CONFIG_64BIT
+static inline cycles_t get_cycles(void)
+{
+       return readq_relaxed(clint_time_val);
+}
+#else /* !CONFIG_64BIT */
+static inline u32 get_cycles(void)
+{
+       return readl_relaxed(((u32 *)clint_time_val));
+}
+#define get_cycles get_cycles
+
+static inline u32 get_cycles_hi(void)
+{
+       return readl_relaxed(((u32 *)clint_time_val) + 1);
+}
+#define get_cycles_hi get_cycles_hi
+#endif /* CONFIG_64BIT */
+
+#else /* CONFIG_RISCV_M_MODE */
+
 static inline cycles_t get_cycles(void)
 {
        return csr_read(CSR_TIME);
@@ -41,6 +66,8 @@ static inline u64 get_cycles64(void)
 }
 #endif /* CONFIG_64BIT */
 
+#endif /* !CONFIG_RISCV_M_MODE */
+
 #define ARCH_HAS_READ_CURRENT_TIMER
 static inline int read_current_timer(unsigned long *timer_val)
 {

diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
index 8eeafa82c03d3df9f9603115b8aed31ece17577b..d17367dee02cce35acf23fa5d040887ff7ea0802 100644 (file)
--- a/drivers/clocksource/timer-clint.c
+++ b/drivers/clocksource/timer-clint.c
@@ -19,6 +19,11 @@
 #include <linux/interrupt.h>
 #include <linux/of_irq.h>
 #include <linux/smp.h>
+#include <linux/timex.h>
+
+#ifndef CONFIG_RISCV_M_MODE
+#include <asm/clint.h>
+#endif
 
 #define CLINT_IPI_OFF          0
 #define CLINT_TIMER_CMP_OFF    0x4000
@@ -31,6 +36,10 @@ static u64 __iomem *clint_timer_val;
 static unsigned long clint_timer_freq;
 static unsigned int clint_timer_irq;
 
+#ifdef CONFIG_RISCV_M_MODE
+u64 __iomem *clint_time_val;
+#endif
+
 static void clint_send_ipi(const struct cpumask *target)
 {
        unsigned int cpu;
@@ -184,6 +193,14 @@ static int __init clint_timer_init_dt(struct device_node *np)
        clint_timer_val = base + CLINT_TIMER_VAL_OFF;
        clint_timer_freq = riscv_timebase;
 
+#ifdef CONFIG_RISCV_M_MODE
+       /*
+        * Yes, that's an odd naming scheme.  time_val is public, but hopefully
+        * will die in favor of something cleaner.
+        */
+       clint_time_val = clint_timer_val;
+#endif
+
        pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq);
 
        rc = clocksource_register_hz(&clint_clocksource, clint_timer_freq);