ARM: dts: Add Altera L2 Cache and OCRAM EDAC entries

Add the device tree entries and bindings needed to support the Altera L2
cache and On-Chip RAM EDAC. This patch relies upon an earlier patch to
declare and setup On-chip RAM properly:

  8b907c8b62ac ("arm: dts: socfpga: Add OCRAM node")

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: galak@codeaurora.org
Cc: grant.likely@linaro.org
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: ijc+devicetree@hellion.org.uk
Cc: Kumar Gala <galak@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux@arm.linux.org.uk
Cc: linux-doc@vger.kernel.org
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: m.chehab@samsung.com
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/1455132384-17108-2-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
new file mode 100644 (file)
index 0000000..885f93d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -0,0 +1,49 @@
+Altera SoCFPGA ECC Manager
+This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
+The ECC Manager counts and corrects single bit errors and counts/handles
+double bit errors which are uncorrectable.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-ecc-manager"
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+       interrupt. Note the rising edge type.
+
+On Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-ocram-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- iram : phandle to On-Chip RAM definition.
+- interrupts : Should be single bit error interrupt, then double bit error
+       interrupt. Note the rising edge type.
+
+Example:
+
+       eccmgr: eccmgr@ffd08140 {
+               compatible = "altr,socfpga-ecc-manager";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               l2-ecc@ffd08140 {
+                       compatible = "altr,socfpga-l2-ecc";
+                       reg = <0xffd08140 0x4>;
+                       interrupts = <0 36 1>, <0 37 1>;
+               };
+
+               ocram-ecc@ffd08144 {
+                       compatible = "altr,socfpga-ocram-ecc";
+                       reg = <0xffd08144 0x4>;
+                       iram = <&ocram>;
+                       interrupts = <0 178 1>, <0 179 1>;
+               };
+       };

diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 3ed4abdaaa9cc4efe8b8c169b01a49f8e6b938fd..15cbc747c2425e5aa95b2c0b86aada0a14b8e46e 100644 (file)
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -656,6 +656,26 @@
                        status = "disabled";
                };
 
+               eccmgr: eccmgr@ffd08140 {
+                       compatible = "altr,socfpga-ecc-manager";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+
+                       l2-ecc@ffd08140 {
+                               compatible = "altr,socfpga-l2-ecc";
+                               reg = <0xffd08140 0x4>;
+                               interrupts = <0 36 1>, <0 37 1>;
+                       };
+
+                       ocram-ecc@ffd08144 {
+                               compatible = "altr,socfpga-ocram-ecc";
+                               reg = <0xffd08144 0x4>;
+                               iram = <&ocram>;
+                               interrupts = <0 178 1>, <0 179 1>;
+                       };
+               };
+
                L2: l2-cache@fffef000 {
                        compatible = "arm,pl310-cache";
                        reg = <0xfffef000 0x1000>;