ARM: shmobile: ap4evb: Register pinctrl mapping for FSI

Replace the GPIO-based FSI pinmux configuration by a pinctrl mapping.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index f42e731e1694c3721347d0f80ff4c3ffdc0596c4..2f03685607fab9e597269740869b514ba6ea9cae 100644 (file)
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1089,6 +1089,16 @@ static const struct pinctrl_map ap4evb_pinctrl_map[] = {
        /* CEU */
        PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-sh7372",
                                  "ceu_clk_0", "ceu"),
+       /* FSIA (AK4643) */
+       PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+                                 "fsia_sclk_in", "fsia"),
+       PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+                                 "fsia_data_in", "fsia"),
+       PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-sh7372",
+                                 "fsia_data_out", "fsia"),
+       /* FSIB (HDMI) */
+       PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-sh7372",
+                                 "fsib_mclk_in", "fsib"),
        /* MMCIF */
        PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
                                  "mmc0_data8_0", "mmc0"),
@@ -1165,11 +1175,7 @@ static void __init ap4evb_init(void)
        /* setup USB phy */
        __raw_writew(0x8a0a, IOMEM(0xE6058130));        /* USBCR4 */
 
-       /* enable FSI2 port A (ak4643) */
-       gpio_request(GPIO_FN_FSIAIBT,   NULL);
-       gpio_request(GPIO_FN_FSIAILR,   NULL);
-       gpio_request(GPIO_FN_FSIAISLD,  NULL);
-       gpio_request(GPIO_FN_FSIAOSLD,  NULL);
+       /* FSI2 port A (ak4643) */
        gpio_request_one(161, GPIOF_OUT_INIT_LOW, NULL); /* slave */
 
        gpio_request(9, NULL);
@@ -1180,8 +1186,7 @@ static void __init ap4evb_init(void)
        /* card detect pin for MMC slot (CN7) */
        gpio_request_one(41, GPIOF_IN, NULL);
 
-       /* setup FSI2 port B (HDMI) */
-       gpio_request(GPIO_FN_FSIBCK, NULL);
+       /* FSI2 port B (HDMI) */
        __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
 
        /* set SPU2 clock to 119.6 MHz */