ARM: mxs: remove unneeded enet_out clk initialization

With fec driver taking care of enet_out clk, most of board setup
do not need to enable enet_out clk.  So remove them.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 16870bf853b8f4e748bed10affea8f7a478f0797..6a4e11824ec9e977329818b7f0a76aa2dbee07ff 100644 (file)
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -360,7 +360,6 @@ static inline void enable_clk_enet_out(void)
 
 static void __init imx28_evk_init(void)
 {
-       enable_clk_enet_out();
        update_fec_mac_prop(OUI_FSL);
 
        mxsfb_pdata.mode_list = mx28evk_video_modes;
@@ -391,11 +390,6 @@ static void __init m28evk_init(void)
        mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 }
 
-static void __init sc_sps1_init(void)
-{
-       enable_clk_enet_out();
-}
-
 static int apx4devkit_phy_fixup(struct phy_device *phy)
 {
        phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
@@ -494,7 +488,6 @@ static void __init tx28_post_init(void)
 
 static void __init cfa10049_init(void)
 {
-       enable_clk_enet_out();
        update_fec_mac_prop(OUI_CRYSTALFONTZ);
 
        mxsfb_pdata.mode_list = cfa10049_video_modes;
@@ -506,14 +499,11 @@ static void __init cfa10049_init(void)
 
 static void __init cfa10037_init(void)
 {
-       enable_clk_enet_out();
        update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }
 
 static void __init apf28_init(void)
 {
-       enable_clk_enet_out();
-
        mxsfb_pdata.mode_list = apf28dev_video_modes;
        mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
        mxsfb_pdata.default_bpp = 16;
@@ -538,8 +528,6 @@ static void __init mxs_machine_init(void)
                cfa10049_init();
        else if (of_machine_is_compatible("armadeus,imx28-apf28"))
                apf28_init();
-       else if (of_machine_is_compatible("schulercontrol,imx28-sps1"))
-               sc_sps1_init();
 
        of_platform_populate(NULL, of_default_bus_match_table,
                             mxs_auxdata_lookup, NULL);