As per draft-hilland-iwarp-verbs-v1.0, sec 6.2.3, always initiate a CLOSE
when entering into TERM state.
In c4iw_modify_qp(), disconnect operation should only be performed when
the modify_qp call is invoked from ib_core. And all other internal
modify_qp calls(invoked within iw_cxgb4) that needs 'disconnect' should
call c4iw_ep_disconnect() explicitly after modify_qp. Otherwise, deadlocks
like below can occur:
 Call Trace:
  schedule+0x2f/0xa0
  schedule_preempt_disabled+0xa/0x10
  __mutex_lock.isra.5+0x2d0/0x4a0
  c4iw_ep_disconnect+0x39/0x430    => tries to reacquire ep lock again
  c4iw_modify_qp+0x468/0x10d0
  rx_data+0x218/0x570              => acquires ep lock
  process_work+0x5f/0x70
  process_one_work+0x1a7/0x3b0
  worker_thread+0x30/0x390
  kthread+0x112/0x130
  ret_from_fork+0x35/0x40
Fixes: d2c33370ae73 ("RDMA/iw_cxgb4: Always disconnect when QP is transitioning to TERMINATE state")
Link: https://lore.kernel.org/r/20200204091230.7210-1-krishna2@chelsio.com
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
                                       C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
                }
 
+               /* As per draft-hilland-iwarp-verbs-v1.0, sec 6.2.3,
+                * when entering the TERM state the RNIC MUST initiate a CLOSE.
+                */
+               c4iw_ep_disconnect(ep, 1, GFP_KERNEL);
                c4iw_put_ep(&ep->com);
        } else
                pr_warn("TERM received tid %u no ep/qp\n", tid);
 
                        qhp->attr.layer_etype = attrs->layer_etype;
                        qhp->attr.ecode = attrs->ecode;
                        ep = qhp->ep;
-                       c4iw_get_ep(&ep->com);
-                       disconnect = 1;
                        if (!internal) {
+                               c4iw_get_ep(&ep->com);
                                terminate = 1;
+                               disconnect = 1;
                        } else {
                                terminate = qhp->attr.send_term;
                                ret = rdma_fini(rhp, qhp, ep);