[media] az6007: Fix the I2C code in order to handle mt2063

mt2063 uses a one-byte transfer. This requires a special handling
inside the i2c code. Fix it to properly accept i2c reads. This
is needed to make the mt2063 to be detected.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/dvb-usb/az6007.c b/drivers/media/dvb/dvb-usb/az6007.c
index 6a21f928550a944774aca82bde4ada47ba4ff5cb..56126d41a604343c9847158d5f26decf5f36dd9d 100644 (file)
--- a/drivers/media/dvb/dvb-usb/az6007.c
+++ b/drivers/media/dvb/dvb-usb/az6007.c
@@ -42,7 +42,7 @@ struct az6007_device_state {
 struct drxk_config terratec_h7_drxk = {
        .adr = 0x29,
        .single_master = 1,
-       .no_i2c_bridge = 1,
+       .no_i2c_bridge = 0,
        .microcode_name = "dvb-usb-terratec-h5-drxk.fw",
 };
 
@@ -451,7 +451,6 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msgs[],int nu
 
        for (i = 0; i < num; i++) {
                addr = msgs[i].addr << 1;
-
                if (((i + 1) < num)
                    && (msgs[i].len == 1)
                    && (!msgs[i].flags & I2C_M_RD)
@@ -462,44 +461,55 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msgs[],int nu
                         * the first xfer has just 1 byte length.
                         * Need to join both into one operation
                         */
-                       printk("az6007 I2C xfer write+read addr=0x%x len=%d/%d: ",
-                               addr, msgs[i].len, msgs[i + 1].len);
+                       if (dvb_usb_az6007_debug & 2)
+                               printk(KERN_DEBUG
+                                      "az6007 I2C xfer write+read addr=0x%x len=%d/%d: ",
+                                      addr, msgs[i].len, msgs[i + 1].len);
                        req = 0xb9;
-                       index = 0;
-                       value = addr;
-                       for (j = 0; j < msgs[i].len; j++)
-                               data[j] = msgs[i].buf[j];
+                       index = msgs[i].buf[0];
+                       value = addr | (1 << 8);
                        length = 6 + msgs[i + 1].len;
                        len = msgs[i + 1].len;
                        ret = az6007_usb_in_op(d,req,value,index,data,length);
                        if (ret >= len) {
                                for (j = 0; j < len; j++) {
                                        msgs[i + 1].buf[j] = data[j + 5];
-                                       printk("0x%02x ", msgs[i + 1].buf[j]);
+                                       if (dvb_usb_az6007_debug & 2)
+                                               printk(KERN_CONT
+                                                      "0x%02x ",
+                                                      msgs[i + 1].buf[j]);
                                }
                        } else
                                ret = -EIO;
                        i++;
                } else if (!(msgs[i].flags & I2C_M_RD)) {
                        /* write bytes */
-//                     printk("az6007 I2C xfer write addr=0x%x len=%d: ",
-//                              addr, msgs[i].len);
+                       if (dvb_usb_az6007_debug & 2)
+                               printk(KERN_DEBUG
+                                      "az6007 I2C xfer write addr=0x%x len=%d: ",
+                                      addr, msgs[i].len);
                        req = 0xbd;
                        index = msgs[i].buf[0];
                        value = addr | (1 << 8);
                        length = msgs[i].len - 1;
                        len = msgs[i].len - 1;
-//                     printk("(0x%02x) ", msgs[i].buf[0]);
+                       if (dvb_usb_az6007_debug & 2)
+                               printk(KERN_CONT
+                                      "(0x%02x) ", msgs[i].buf[0]);
                        for (j = 0; j < len; j++)
                        {
                                data[j] = msgs[i].buf[j + 1];
-//                             printk("0x%02x ", data[j]);
+                               if (dvb_usb_az6007_debug & 2)
+                                       printk(KERN_CONT
+                                              "0x%02x ", data[j]);
                        }
                        ret = az6007_usb_out_op(d,req,value,index,data,length);
                } else {
                        /* read bytes */
-//                     printk("az6007 I2C xfer read addr=0x%x len=%d: ",
-//                              addr, msgs[i].len);
+                       if (dvb_usb_az6007_debug & 2)
+                               printk(KERN_DEBUG
+                                      "az6007 I2C xfer read addr=0x%x len=%d: ",
+                                      addr, msgs[i].len);
                        req = 0xb9;
                        index = msgs[i].buf[0];
                        value = addr;
@@ -509,10 +519,13 @@ static int az6007_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msgs[],int nu
                        for (j = 0; j < len; j++)
                        {
                                msgs[i].buf[j] = data[j + 5];
-//                             printk("0x%02x ", data[j + 5]);
+                               if (dvb_usb_az6007_debug & 2)
+                                       printk(KERN_CONT
+                                              "0x%02x ", data[j + 5]);
                        }
                }
-//             printk("\n");
+               if (dvb_usb_az6007_debug & 2)
+                       printk(KERN_CONT "\n");
                if (ret < 0)
                        goto err;
        }