[SCSI] mptsas : Code cleanup of host page alloc and diag reset.

Code cleanup of host page alloc and diag reset.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 5d0ba4f5924ca5bf34547dabcab8cda8cbf2ff4a..8ab7b37ed70d83eff391e59cecaa3322e47cd922 100644 (file)
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1297,12 +1297,8 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
        psge = (char *)&ioc_init->HostPageBufferSGE;
        flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
            MPI_SGE_FLAGS_SYSTEM_ADDRESS |
-           MPI_SGE_FLAGS_32_BIT_ADDRESSING |
            MPI_SGE_FLAGS_HOST_TO_IOC |
            MPI_SGE_FLAGS_END_OF_BUFFER;
-       if (sizeof(dma_addr_t) == sizeof(u64)) {
-           flags_length |= MPI_SGE_FLAGS_64_BIT_ADDRESSING;
-       }
        flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
        flags_length |= ioc->HostPageBuffer_sz;
        ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
@@ -2224,8 +2220,6 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
        int      hard;
        int      rc=0;
        int      ii;
-       u8       cb_idx;
-       int      handlers;
        int      ret = 0;
        int      reset_alt_ioc_active = 0;
        int      irq_allocated = 0;
@@ -2548,34 +2542,6 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
                mpt_get_manufacturing_pg_0(ioc);
        }
 
-       /*
-        * Call each currently registered protocol IOC reset handler
-        * with post-reset indication.
-        * NOTE: If we're doing _IOC_BRINGUP, there can be no
-        * MptResetHandlers[] registered yet.
-        */
-       if (hard_reset_done) {
-               rc = handlers = 0;
-               for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
-                       if ((ret == 0) && MptResetHandlers[cb_idx]) {
-                               dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-                                   "Calling IOC post_reset handler #%d\n",
-                                   ioc->name, cb_idx));
-                               rc += mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
-                               handlers++;
-                       }
-
-                       if (alt_ioc_ready && MptResetHandlers[cb_idx]) {
-                               drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-                                   "Calling IOC post_reset handler #%d\n",
-                                   ioc->alt_ioc->name, cb_idx));
-                               rc += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_POST_RESET);
-                               handlers++;
-                       }
-               }
-               /* FIXME?  Examine results here? */
-       }
-
  out:
        if ((ret != 0) && irq_allocated) {
                free_irq(ioc->pci_irq, ioc);
@@ -3938,6 +3904,7 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
        int count = 0;
        u32 diag1val = 0;
        MpiFwHeader_t *cached_fw;       /* Pointer to FW */
+       u8       cb_idx;
 
        /* Clear any existing interrupts */
        CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
@@ -3956,6 +3923,18 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
                else
                        mdelay(1);
 
+               /*
+                * Call each currently registered protocol IOC reset handler
+                * with pre-reset indication.
+                * NOTE: If we're doing _IOC_BRINGUP, there can be no
+                * MptResetHandlers[] registered yet.
+                */
+               for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+                       if (MptResetHandlers[cb_idx])
+                               (*(MptResetHandlers[cb_idx]))(ioc,
+                                               MPT_IOC_PRE_RESET);
+               }
+
                for (count = 0; count < 60; count ++) {
                        doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
                        doorbell &= MPI_IOC_STATE_MASK;
@@ -4052,25 +4031,15 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
                 * NOTE: If we're doing _IOC_BRINGUP, there can be no
                 * MptResetHandlers[] registered yet.
                 */
-               {
-                       u8       cb_idx;
-                       int      r = 0;
-
-                       for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
-                               if (MptResetHandlers[cb_idx]) {
-                                       dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-                                               "Calling IOC pre_reset handler #%d\n",
-                                               ioc->name, cb_idx));
-                                       r += mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
-                                       if (ioc->alt_ioc) {
-                                               dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-                                                       "Calling alt-%s pre_reset handler #%d\n",
-                                                       ioc->name, ioc->alt_ioc->name, cb_idx));
-                                               r += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_PRE_RESET);
-                                       }
+               for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+                       if (MptResetHandlers[cb_idx]) {
+                               mpt_signal_reset(cb_idx,
+                                       ioc, MPT_IOC_PRE_RESET);
+                               if (ioc->alt_ioc) {
+                                       mpt_signal_reset(cb_idx,
+                                       ioc->alt_ioc, MPT_IOC_PRE_RESET);
                                }
                        }
-                       /* FIXME?  Examine results here? */
                }
 
                if (ioc->cached_fw)
@@ -6956,7 +6925,7 @@ EXPORT_SYMBOL(mpt_halt_firmware);
 int
 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 {
-       int              rc;
+       int      rc;
        u8       cb_idx;
        unsigned long    flags;
        unsigned long    time_count;
@@ -6982,8 +6951,6 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
                ioc->alt_ioc->ioc_reset_in_progress = 1;
        spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
-       /* FIXME: If do_ioc_recovery fails, repeat....
-        */
 
        /* The SCSI driver needs to adjust timeouts on all current
         * commands prior to the diagnostic reset being issued.
@@ -7020,6 +6987,15 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
        }
        spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
 
+       for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+               if (MptResetHandlers[cb_idx]) {
+                       mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
+                       if (ioc->alt_ioc)
+                               mpt_signal_reset(cb_idx,
+                                       ioc->alt_ioc, MPT_IOC_POST_RESET);
+               }
+       }
+
        dtmprintk(ioc,
            printk(MYIOC_s_DEBUG_FMT
                "HardResetHandler: completed (%d seconds): %s\n", ioc->name,