} __packed;
 
 
-#define NETVSC_MTU 65536
-#define NETVSC_MTU_MIN 68
+#define NETVSC_MTU 65535
+#define NETVSC_MTU_MIN ETH_MIN_MTU
 
 #define NETVSC_RECEIVE_BUFFER_SIZE             (1024*1024*16)  /* 16MB */
 #define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY      (1024*1024*15)  /* 15MB */
 
        struct netvsc_device *nvdev = ndevctx->nvdev;
        struct hv_device *hdev = ndevctx->device_ctx;
        struct netvsc_device_info device_info;
-       int limit = ETH_DATA_LEN;
        u32 num_chn;
        int ret = 0;
 
        if (ndevctx->start_remove || !nvdev || nvdev->destroy)
                return -ENODEV;
 
-       if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
-               limit = NETVSC_MTU - ETH_HLEN;
-
-       if (mtu < NETVSC_MTU_MIN || mtu > limit)
-               return -EINVAL;
-
        ret = netvsc_close(ndev);
        if (ret)
                goto out;
        netif_set_real_num_tx_queues(net, nvdev->num_chn);
        netif_set_real_num_rx_queues(net, nvdev->num_chn);
 
+       /* MTU range: 68 - 1500 or 65521 */
+       net->min_mtu = NETVSC_MTU_MIN;
+       if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
+               net->max_mtu = NETVSC_MTU - ETH_HLEN;
+       else
+               net->max_mtu = ETH_DATA_LEN;
+
        ret = register_netdev(net);
        if (ret != 0) {
                pr_err("Unable to register netdev.\n");
 
        .set_settings = virtnet_set_settings,
 };
 
-#define MIN_MTU 68
-#define MAX_MTU 65535
-
-static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
-{
-       if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
-               return -EINVAL;
-       dev->mtu = new_mtu;
-       return 0;
-}
-
 static const struct net_device_ops virtnet_netdev = {
        .ndo_open            = virtnet_open,
        .ndo_stop            = virtnet_close,
        .ndo_validate_addr   = eth_validate_addr,
        .ndo_set_mac_address = virtnet_set_mac_address,
        .ndo_set_rx_mode     = virtnet_set_rx_mode,
-       .ndo_change_mtu      = virtnet_change_mtu,
        .ndo_get_stats64     = virtnet_stats,
        .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
        .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
        return true;
 }
 
+#define MIN_MTU ETH_MIN_MTU
+#define MAX_MTU ETH_MAX_MTU
+
 static int virtnet_probe(struct virtio_device *vdev)
 {
        int i, err;
 
        dev->vlan_features = dev->features;
 
+       /* MTU range: 68 - 65535 */
+       dev->min_mtu = MIN_MTU;
+       dev->max_mtu = MAX_MTU;
+
        /* Configuration may specify what MAC to use.  Otherwise random. */
        if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
                virtio_cread_bytes(vdev,
                mtu = virtio_cread16(vdev,
                                     offsetof(struct virtio_net_config,
                                              mtu));
-               if (virtnet_change_mtu(dev, mtu))
+               if (mtu < dev->min_mtu || mtu > dev->max_mtu)
                        __virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
+               else
+                       dev->mtu = mtu;
        }
 
        if (vi->any_header_sg)
 
        struct vmxnet3_adapter *adapter = netdev_priv(netdev);
        int err = 0;
 
-       if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU)
-               return -EINVAL;
-
        netdev->mtu = new_mtu;
 
        /*
        vmxnet3_set_ethtool_ops(netdev);
        netdev->watchdog_timeo = 5 * HZ;
 
+       /* MTU range: 60 - 9000 */
+       netdev->min_mtu = VMXNET3_MIN_MTU;
+       netdev->max_mtu = VMXNET3_MAX_MTU;
+
        INIT_WORK(&adapter->work, vmxnet3_reset_work);
        set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
 
 
 static int xenvif_change_mtu(struct net_device *dev, int mtu)
 {
        struct xenvif *vif = netdev_priv(dev);
-       int max = vif->can_sg ? 65535 - VLAN_ETH_HLEN : ETH_DATA_LEN;
+       int max = vif->can_sg ? ETH_MAX_MTU - VLAN_ETH_HLEN : ETH_DATA_LEN;
 
        if (mtu > max)
                return -EINVAL;
 
        dev->tx_queue_len = XENVIF_QUEUE_LENGTH;
 
+       dev->min_mtu = 0;
+       dev->max_mtu = ETH_MAX_MTU - VLAN_ETH_HLEN;
+
        /*
         * Initialise a dummy MAC address. We choose the numerically
         * largest non-broadcast address to prevent the address getting
 
        netdev->features |= netdev->hw_features;
 
        netdev->ethtool_ops = &xennet_ethtool_ops;
+       netdev->min_mtu = 0;
+       netdev->max_mtu = XEN_NETIF_MAX_TX_SIZE;
        SET_NETDEV_DEV(netdev, &dev->dev);
 
        np->netdev = netdev;
 
 
 };
 
-#define                ETH_HEADER_SIZE 14      /* size of ethernet header */
-
 #define                ETH_MIN_DATA_SIZE 46    /* minimum eth data size */
-#define                ETH_MIN_PACKET_SIZE (ETH_HEADER_SIZE + ETH_MIN_DATA_SIZE)
+#define                ETH_MIN_PACKET_SIZE (ETH_HLEN + ETH_MIN_DATA_SIZE)
 
-#define                ETH_MAX_MTU 16384       /* maximum data size */
+#define                VISOR_ETH_MAX_MTU 16384 /* maximum data size */
 
 #ifndef MAX_MACADDR_LEN
 #define MAX_MACADDR_LEN 6      /* number of bytes in MAC address */
        int len;        /* full length of data in the packet */
        int num_frags;  /* number of fragments in frags containing data */
        struct phys_info frags[MAX_PHYS_INFO];  /* physical page information */
-       char ethhdr[ETH_HEADER_SIZE];   /* the ethernet header  */
+       char ethhdr[ETH_HLEN];  /* the ethernet header  */
        struct {
                /* these are needed for csum at uisnic end */
                u8 valid;       /* 1 = struct is valid - else ignore */
  */
 #define RCVPOST_BUF_SIZE 4032
 #define MAX_NET_RCV_CHAIN \
-       ((ETH_MAX_MTU + ETH_HEADER_SIZE + RCVPOST_BUF_SIZE - 1) \
+       ((VISOR_ETH_MAX_MTU + ETH_HLEN + RCVPOST_BUF_SIZE - 1) \
        / RCVPOST_BUF_SIZE)
 
 struct net_pkt_rcvpost {
 
         * pointing to
         */
        firstfraglen = skb->len - skb->data_len;
-       if (firstfraglen < ETH_HEADER_SIZE) {
+       if (firstfraglen < ETH_HLEN) {
                spin_unlock_irqrestore(&devdata->priv_lock, flags);
                devdata->busy_cnt++;
                dev_err(&netdev->dev,
        /* copy ethernet header from first frag into ocmdrsp
         * - everything else will be pass in frags & DMA'ed
         */
-       memcpy(cmdrsp->net.xmt.ethhdr, skb->data, ETH_HEADER_SIZE);
+       memcpy(cmdrsp->net.xmt.ethhdr, skb->data, ETH_HLEN);
        /* copy frags info - from skb->data we need to only provide access
         * beyond eth header
         */