--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc-ierb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrated Endpoint Register Block
+
+description:
+ The fsl_enetc driver can probe on the Integrated Endpoint Register Block,
+ which preconfigures the FIFO limits for the ENETC ports.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+ - Vladimir Oltean <vladimir.oltean@nxp.com>
+ - Wei Fang <wei.fang@nxp.com>
+ - Claudiu Manoil <claudiu.manoil@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - fsl,ls1028a-enetc-ierb
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ endpoint-config@f0800000 {
+ compatible = "fsl,ls1028a-enetc-ierb";
+ reg = <0xf0800000 0x10000>;
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENETC external MDIO PCIe endpoint device
+
+description:
+ NETC provides an external master MDIO interface (EMDIO) for managing external
+ devices (PHYs). EMDIO supports both Clause 22 and 45 protocols. And the EMDIO
+ provides a means for different software modules to share a single set of MDIO
+ signals to access their PHYs.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+ - Vladimir Oltean <vladimir.oltean@nxp.com>
+ - Wei Fang <wei.fang@nxp.com>
+ - Claudiu Manoil <claudiu.manoil@nxp.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - pci1957,ee01
+ - const: fsl,enetc-mdio
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: mdio.yaml
+ - $ref: /schemas/pci/pci-device.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pcie{
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ mdio@0,3 {
+ compatible = "pci1957,ee01", "fsl,enetc-mdio";
+ reg = <0x000300 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,enetc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The NIC functionality of NXP NETC
+
+description:
+ The NIC functionality in NETC is known as EtherNET Controller (ENETC). ENETC
+ supports virtualization/isolation based on PCIe Single Root IO Virtualization
+ (SR-IOV), advanced QoS with 8 traffic classes and 4 drop resilience levels,
+ and a full range of TSN standards and NIC offload capabilities
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+ - Vladimir Oltean <vladimir.oltean@nxp.com>
+ - Wei Fang <wei.fang@nxp.com>
+ - Claudiu Manoil <claudiu.manoil@nxp.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - pci1957,e100
+ - const: fsl,enetc
+
+ reg:
+ maxItems: 1
+
+ mdio:
+ $ref: mdio.yaml
+ unevaluatedProperties: false
+ description: Optional child node for ENETC instance, otherwise use NETC EMDIO.
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/pci/pci-device.yaml
+ - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pcie {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ethernet@0,0 {
+ compatible = "pci1957,e100", "fsl,enetc";
+ reg = <0x000000 0 0 0 0>;
+ phy-handle = <&sgmii_phy0>;
+ phy-connection-type = "sgmii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy@2 {
+ reg = <0x2>;
+ };
+ };
+ };
+ };
+++ /dev/null
-* ENETC ethernet device tree bindings
-
-Depending on board design and ENETC port type (internal or
-external) there are two supported link modes specified by
-below device tree bindings.
-
-Required properties:
-
-- reg : Specifies PCIe Device Number and Function
- Number of the ENETC endpoint device, according
- to parent node bindings.
-- compatible : Should be "fsl,enetc".
-
-1. The ENETC external port is connected to a MDIO configurable phy
-
-1.1. Using the local ENETC Port MDIO interface
-
-In this case, the ENETC node should include a "mdio" sub-node
-that in turn should contain the "ethernet-phy" node describing the
-external phy. Below properties are required, their bindings
-already defined in Documentation/devicetree/bindings/net/ethernet.txt or
-Documentation/devicetree/bindings/net/phy.txt.
-
-Required:
-
-- phy-handle : Phandle to a PHY on the MDIO bus.
- Defined in ethernet.txt.
-
-- phy-connection-type : Defined in ethernet.txt.
-
-- mdio : "mdio" node, defined in mdio.txt.
-
-- ethernet-phy : "ethernet-phy" node, defined in phy.txt.
-
-Example:
-
- ethernet@0,0 {
- compatible = "fsl,enetc";
- reg = <0x000000 0 0 0 0>;
- phy-handle = <&sgmii_phy0>;
- phy-connection-type = "sgmii";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- sgmii_phy0: ethernet-phy@2 {
- reg = <0x2>;
- };
- };
- };
-
-1.2. Using the central MDIO PCIe endpoint device
-
-In this case, the mdio node should be defined as another PCIe
-endpoint node, at the same level with the ENETC port nodes.
-
-Required properties:
-
-- reg : Specifies PCIe Device Number and Function
- Number of the ENETC endpoint device, according
- to parent node bindings.
-- compatible : Should be "fsl,enetc-mdio".
-
-The remaining required mdio bus properties are standard, their bindings
-already defined in Documentation/devicetree/bindings/net/mdio.txt.
-
-Example:
-
- ethernet@0,0 {
- compatible = "fsl,enetc";
- reg = <0x000000 0 0 0 0>;
- phy-handle = <&sgmii_phy0>;
- phy-connection-type = "sgmii";
- };
-
- mdio@0,3 {
- compatible = "fsl,enetc-mdio";
- reg = <0x000300 0 0 0 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- sgmii_phy0: ethernet-phy@2 {
- reg = <0x2>;
- };
- };
-
-2. The ENETC port is an internal port or has a fixed-link external
-connection
-
-In this case, the ENETC port node defines a fixed link connection,
-as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
-
-Required:
-
-- fixed-link : "fixed-link" node, defined in "fixed-link.txt".
-
-Example:
- ethernet@0,2 {
- compatible = "fsl,enetc";
- reg = <0x000200 0 0 0 0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
-* Integrated Endpoint Register Block bindings
-
-Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register
-Block, which preconfigures the FIFO limits for the ENETC ports. This is a node
-with the following properties:
-
-- reg : Specifies the address in the SoC memory space.
-- compatible : Must be "fsl,ls1028a-enetc-ierb".
-
-Example:
- ierb@1f0800000 {
- compatible = "fsl,ls1028a-enetc-ierb";
- reg = <0x01 0xf0800000 0x0 0x10000>;
- };
projects / users / hch / configfs.git / commitdiff