octeontx2-pf: ethtool physical link configuration

Register set_link_ksetting callback with driver such that
link configurations parameters like advertised mode,speed, duplex
and autoneg can be configured.

below command
ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on

Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index d5d9b1d91751de7fb1496d99d282733f7077b8b3..237e5d3321d420809aff8b6c8341a83f76cefe6e 100644 (file)
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -1157,6 +1157,68 @@ static int otx2_get_link_ksettings(struct net_device *netdev,
        return 0;
 }
 
+static void otx2_get_advertised_mode(const struct ethtool_link_ksettings *cmd,
+                                    u64 *mode)
+{
+       u32 bit_pos;
+
+       /* Firmware does not support requesting multiple advertised modes
+        * return first set bit
+        */
+       bit_pos = find_first_bit(cmd->link_modes.advertising,
+                                __ETHTOOL_LINK_MODE_MASK_NBITS);
+       if (bit_pos != __ETHTOOL_LINK_MODE_MASK_NBITS)
+               *mode = bit_pos;
+}
+
+static int otx2_set_link_ksettings(struct net_device *netdev,
+                                  const struct ethtool_link_ksettings *cmd)
+{
+       struct otx2_nic *pf = netdev_priv(netdev);
+       struct ethtool_link_ksettings cur_ks;
+       struct cgx_set_link_mode_req *req;
+       struct mbox *mbox = &pf->mbox;
+       int err = 0;
+
+       memset(&cur_ks, 0, sizeof(struct ethtool_link_ksettings));
+
+       if (!ethtool_validate_speed(cmd->base.speed) ||
+           !ethtool_validate_duplex(cmd->base.duplex))
+               return -EINVAL;
+
+       if (cmd->base.autoneg != AUTONEG_ENABLE &&
+           cmd->base.autoneg != AUTONEG_DISABLE)
+               return -EINVAL;
+
+       otx2_get_link_ksettings(netdev, &cur_ks);
+
+       /* Check requested modes against supported modes by hardware */
+       if (!bitmap_subset(cmd->link_modes.advertising,
+                          cur_ks.link_modes.supported,
+                          __ETHTOOL_LINK_MODE_MASK_NBITS))
+               return -EINVAL;
+
+       mutex_lock(&mbox->lock);
+       req = otx2_mbox_alloc_msg_cgx_set_link_mode(&pf->mbox);
+       if (!req) {
+               err = -ENOMEM;
+               goto end;
+       }
+
+       req->args.speed = cmd->base.speed;
+       /* firmware expects 1 for half duplex and 0 for full duplex
+        * hence inverting
+        */
+       req->args.duplex = cmd->base.duplex ^ 0x1;
+       req->args.an = cmd->base.autoneg;
+       otx2_get_advertised_mode(cmd, &req->args.mode);
+
+       err = otx2_sync_mbox_msg(&pf->mbox);
+end:
+       mutex_unlock(&mbox->lock);
+       return err;
+}
+
 static const struct ethtool_ops otx2_ethtool_ops = {
        .supported_coalesce_params = ETHTOOL_COALESCE_USECS |
                                     ETHTOOL_COALESCE_MAX_FRAMES,
@@ -1187,6 +1249,7 @@ static const struct ethtool_ops otx2_ethtool_ops = {
        .get_fecparam           = otx2_get_fecparam,
        .set_fecparam           = otx2_set_fecparam,
        .get_link_ksettings     = otx2_get_link_ksettings,
+       .set_link_ksettings     = otx2_set_link_ksettings,
 };
 
 void otx2_set_ethtool_ops(struct net_device *netdev)