ARM: DaVinci: usb setup

Declare the musb_hdrc platform device for DaVinci.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index bddfbb7170648fb382e656f83bc51e2df1ecf8da..4dc458597f4009347308758552c183da94f151f8 100644 (file)
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y                  := time.o irq.o clock.o serial.o io.o id.o psc.o \
-                          gpio.o mux.o devices.o
+                          gpio.o mux.o devices.o usb.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o

diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index a97dfbb15e57299ceb118e4dcc85828a7159e449..4b522e5c70ecaaaba2867d65a2efe7d1c1987f8f 100644 (file)
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -16,4 +16,7 @@ struct sys_timer;
 
 extern struct sys_timer davinci_timer;
 
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */

diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
new file mode 100644 (file)
index 0000000..fe182a8
--- /dev/null
+++ b/arch/arm/mach-davinci/usb.c
@@ -0,0 +1,116 @@
+/*
+ * USB
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <linux/usb/musb.h>
+#include <linux/usb/otg.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct musb_hdrc_eps_bits musb_eps[] = {
+       { "ep1_tx", 8, },
+       { "ep1_rx", 8, },
+       { "ep2_tx", 8, },
+       { "ep2_rx", 8, },
+       { "ep3_tx", 5, },
+       { "ep3_rx", 5, },
+       { "ep4_tx", 5, },
+       { "ep4_rx", 5, },
+};
+
+static struct musb_hdrc_config musb_config = {
+       .multipoint     = true,
+       .dyn_fifo       = true,
+       .soft_con       = true,
+       .dma            = true,
+
+       .num_eps        = 5,
+       .dma_channels   = 8,
+       .ram_bits       = 10,
+       .eps_bits       = musb_eps,
+};
+
+static struct musb_hdrc_platform_data usb_data = {
+#if defined(CONFIG_USB_MUSB_OTG)
+       /* OTG requires a Mini-AB connector */
+       .mode           = MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+       .mode           = MUSB_PERIPHERAL,
+#elif defined(CONFIG_USB_MUSB_HOST)
+       .mode           = MUSB_HOST,
+#endif
+       .config         = &musb_config,
+};
+
+static struct resource usb_resources[] = {
+       {
+               /* physical address */
+               .start          = DAVINCI_USB_OTG_BASE,
+               .end            = DAVINCI_USB_OTG_BASE + 0x5ff,
+               .flags          = IORESOURCE_MEM,
+       },
+       {
+               .start          = IRQ_USBINT,
+               .flags          = IORESOURCE_IRQ,
+       },
+};
+
+static u64 usb_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device usb_dev = {
+       .name           = "musb_hdrc",
+       .id             = -1,
+       .dev = {
+               .platform_data          = &usb_data,
+               .dma_mask               = &usb_dmamask,
+               .coherent_dma_mask      = DMA_32BIT_MASK,
+       },
+       .resource       = usb_resources,
+       .num_resources  = ARRAY_SIZE(usb_resources),
+};
+
+#ifdef CONFIG_USB_MUSB_OTG
+
+static struct otg_transceiver *xceiv;
+
+struct otg_transceiver *otg_get_transceiver(void)
+{
+       if (xceiv)
+               get_device(xceiv->dev);
+       return xceiv;
+}
+EXPORT_SYMBOL(otg_get_transceiver);
+
+int otg_set_transceiver(struct otg_transceiver *x)
+{
+       if (xceiv && x)
+               return -EBUSY;
+       xceiv = x;
+       return 0;
+}
+EXPORT_SYMBOL(otg_set_transceiver);
+
+#endif
+
+void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+{
+       usb_data.power = mA / 2;
+       usb_data.potpgt = potpgt_msec / 2;
+       platform_device_register(&usb_dev);
+}
+
+#else
+
+void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+{
+}
+
+#endif  /* CONFIG_USB_MUSB_HDRC */
+