[PATCH] smbus unhiding kills thermal management

Do not enable the SMBus device on Asus boards if suspend is used.  We do
not reenable the device on resume, leading to all sorts of undesirable
effects, the worst being a total fan failure after resume on Samsung P35
laptop.

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 0d36d504088064a1c0da9f9630998b376f28cae0..d378478612fb76d862b4b584aff1cc14b190f228 100644 (file)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -902,6 +902,7 @@ static void __init k8t_sound_hostbridge(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
 
+#ifndef CONFIG_ACPI_SLEEP
 /*
  * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
  * is not activated. The myth is that Asus said that they do not want the
@@ -913,8 +914,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho
  * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 
  * becomes necessary to do this tweak in two steps -- I've chosen the Host
  * bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
  */
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;
 
 static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 {
@@ -1057,6 +1062,8 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,  PCI_DEVICE_ID_INTEL_ICH6_1,     asus_hides_smbus_lpc_ich6 );
 
+#endif
+
 /*
  * SiS 96x south bridge: BIOS typically hides SMBus device...
  */