Added proper mask for phy id in mpi_phy_stop_resp().
Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
        PM8001F_RUN_TIME        = (1U << 1),
 };
 
+/**
+ * Phy Status
+ */
+#define PHY_LINK_DISABLE       0x00
+#define PHY_LINK_DOWN          0x01
+#define PHY_STATE_LINK_UP_SPCV 0x2
+#define PHY_STATE_LINK_UP_SPC  0x1
+
 #endif
 
                        " status = %x\n", status));
                if (status == 0) {
                        phy->phy_state = 1;
-                       if (pm8001_ha->flags == PM8001F_RUN_TIME)
+                       if (pm8001_ha->flags == PM8001F_RUN_TIME &&
+                                       phy->enable_completion != NULL)
                                complete(phy->enable_completion);
                }
                break;
 
 #define LINKRATE_30                    (0x02 << 8)
 #define LINKRATE_60                    (0x04 << 8)
 
-/* for phy state */
-
-#define PHY_STATE_LINK_UP_SPC          0x1
-
 /* for new SPC controllers MEMBASE III is shared between BIOS and DATA */
 #define GSM_SM_BASE                    0x4F0000
 struct mpi_msg_hdr{
 
 {
        struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
        struct asd_sas_phy *sas_phy = &phy->sas_phy;
-       phy->phy_state = 0;
+       phy->phy_state = PHY_LINK_DISABLE;
        phy->pm8001_ha = pm8001_ha;
        sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
        sas_phy->class = SAS;
        if (rc)
                goto err_out_shost;
        scsi_scan_host(pm8001_ha->shost);
+       pm8001_ha->flags = PM8001F_RUN_TIME;
        return 0;
 
 err_out_shost:
 
        int rc = 0, phy_id = sas_phy->id;
        struct pm8001_hba_info *pm8001_ha = NULL;
        struct sas_phy_linkrates *rates;
+       struct sas_ha_struct *sas_ha;
+       struct pm8001_phy *phy;
        DECLARE_COMPLETION_ONSTACK(completion);
        unsigned long flags;
        pm8001_ha = sas_phy->ha->lldd_ha;
+       phy = &pm8001_ha->phy[phy_id];
        pm8001_ha->phy[phy_id].enable_completion = &completion;
        switch (func) {
        case PHY_FUNC_SET_LINK_RATE:
                        pm8001_ha->phy[phy_id].maximum_linkrate =
                                rates->maximum_linkrate;
                }
-               if (pm8001_ha->phy[phy_id].phy_state == 0) {
+               if (pm8001_ha->phy[phy_id].phy_state ==  PHY_LINK_DISABLE) {
                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
                        wait_for_completion(&completion);
                }
                                              PHY_LINK_RESET);
                break;
        case PHY_FUNC_HARD_RESET:
-               if (pm8001_ha->phy[phy_id].phy_state == 0) {
+               if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
                        wait_for_completion(&completion);
                }
                                              PHY_HARD_RESET);
                break;
        case PHY_FUNC_LINK_RESET:
-               if (pm8001_ha->phy[phy_id].phy_state == 0) {
+               if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
                        PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
                        wait_for_completion(&completion);
                }
                                              PHY_LINK_RESET);
                break;
        case PHY_FUNC_DISABLE:
+               if (pm8001_ha->chip_id != chip_8001) {
+                       if (pm8001_ha->phy[phy_id].phy_state ==
+                               PHY_STATE_LINK_UP_SPCV) {
+                               sas_ha = pm8001_ha->sas;
+                               sas_phy_disconnected(&phy->sas_phy);
+                               sas_ha->notify_phy_event(&phy->sas_phy,
+                                       PHYE_LOSS_OF_SIGNAL);
+                               phy->phy_attached = 0;
+                       }
+               } else {
+                       if (pm8001_ha->phy[phy_id].phy_state ==
+                               PHY_STATE_LINK_UP_SPC) {
+                               sas_ha = pm8001_ha->sas;
+                               sas_phy_disconnected(&phy->sas_phy);
+                               sas_ha->notify_phy_event(&phy->sas_phy,
+                                       PHYE_LOSS_OF_SIGNAL);
+                               phy->phy_attached = 0;
+                       }
+               }
                PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
                break;
        case PHY_FUNC_GET_EVENTS:
 
                pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n",
                                status, phy_id));
        if (status == 0) {
-               phy->phy_state = 1;
-               if (pm8001_ha->flags == PM8001F_RUN_TIME)
+               phy->phy_state = PHY_LINK_DOWN;
+               if (pm8001_ha->flags == PM8001F_RUN_TIME &&
+                               phy->enable_completion != NULL)
                        complete(phy->enable_completion);
        }
        return 0;
                        return 0;
                }
                phy->phy_attached = 0;
-               phy->phy_state = 0;
+               phy->phy_state = PHY_LINK_DISABLE;
                break;
        case HW_EVENT_PORT_INVALID:
                PM8001_MSG_DBG(pm8001_ha,
        u32 status =
                le32_to_cpu(pPayload->status);
        u32 phyid =
-               le32_to_cpu(pPayload->phyid);
+               le32_to_cpu(pPayload->phyid) & 0xFF;
        struct pm8001_phy *phy = &pm8001_ha->phy[phyid];
        PM8001_MSG_DBG(pm8001_ha,
                        pm8001_printk("phy:0x%x status:0x%x\n",
                                        phyid, status));
-       if (status == 0)
-               phy->phy_state = 0;
+       if (status == PHY_STOP_SUCCESS ||
+               status == PHY_STOP_ERR_DEVICE_ATTACHED)
+               phy->phy_state = PHY_LINK_DISABLE;
        return 0;
 }
 
 
 #define LINKRATE_60                    (0x04 << 8)
 #define LINKRATE_120                   (0x08 << 8)
 
+/*phy_stop*/
+#define PHY_STOP_SUCCESS               0x00
+#define PHY_STOP_ERR_DEVICE_ATTACHED   0x1046
+
 /* phy_profile */
 #define SAS_PHY_ANALOG_SETTINGS_PAGE   0x04
 #define PHY_DWORD_LENGTH               0xC
 #define SAS_DOPNRJT_RTRY_TMO            128
 #define SAS_COPNRJT_RTRY_TMO            128
 
-/* for phy state */
-#define PHY_STATE_LINK_UP_SPCV         0x2
 /*
   Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
   Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128