ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix indentation

The ECSPI1 is not used for a FRAM chip, so remove the comment.
While at it, also change some whitespaces to tabs to comply with the
indentation style of the rest of the file.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index 5725e5fc271b468a099285550e78d9fba3c176fb..f05e91841202744003aadaecea989358f5e45548 100644 (file)
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -250,7 +250,6 @@
                >;
        };
 
-       /* FRAM */
        pinctrl_ecspi1: ecspi1grp {
                fsl,pins = <
                        MX6UL_PAD_CSI_DATA07__ECSPI1_MISO       0x100b1
@@ -275,8 +274,8 @@
 
        pinctrl_enet2_mdio: enet2mdiogrp {
                fsl,pins = <
-                       MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
-                       MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
+                       MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
+                       MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
                >;
        };
 
@@ -289,10 +288,10 @@
 
        pinctrl_gpio: gpiogrp {
                fsl,pins = <
-                       MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05      0x1b0b0 /* DOUT1 */
-                       MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04      0x1b0b0 /* DIN1 */
-                       MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01      0x1b0b0 /* DOUT2 */
-                       MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x1b0b0 /* DIN2 */
+                       MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05      0x1b0b0 /* DOUT1 */
+                       MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04      0x1b0b0 /* DIN1 */
+                       MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01      0x1b0b0 /* DOUT2 */
+                       MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x1b0b0 /* DIN2 */
                >;
        };