--- /dev/null
+CONFIG_PPC64=y
+CONFIG_PPC_BOOK3E_64=y
+# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=256
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
+CONFIG_NAMESPACES=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_COUNTERS=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_SCOM_DEBUGFS=y
+CONFIG_PPC_A2_DD2=y
+CONFIG_KVM_GUEST=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_NUMA=y
+# CONFIG_MIGRATION is not set
+CONFIG_PPC_64K_PAGES=y
+CONFIG_SCHED_SMT=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SECCOMP is not set
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
+CONFIG_IPV6_TUNNEL=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NET_TCPPROBE=y
+# CONFIG_WIRELESS is not set
+CONFIG_NET_9P=y
+CONFIG_NET_9P_DEBUG=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_CDROM_PKTCDVD=y
+CONFIG_MISC_DEVICES=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_MV=y
+CONFIG_SATA_SIL=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_MARVELL=y
+CONFIG_PATA_SIL680=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_E1000E=y
+CONFIG_TIGON3=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_HWMON is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1511=y
+CONFIG_RTC_DRV_DS1553=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_CIFS=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_LIBCRC32C=m
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_PPC_EMULATED_STATS=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_VIRQ_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_VIRTUALIZATION=y
config PPC_WSP
bool
select PPC_A2
+ select GENERIC_TBSYNC
select PPC_ICSWX
select PPC_SCOM
select PPC_XICS
select PCI
select PPC_IO_WORKAROUNDS if PCI
select PPC_INDIRECT_PIO if PCI
+ select PPC_WSP_COPRO
default n
menu "WSP platform selection"
depends on PPC_BOOK3E_64
config PPC_PSR2
- bool "PSR-2 platform"
- select GENERIC_TBSYNC
+ bool "PowerEN System Reference Platform 2"
+ select EPAPR_BOOT
+ select PPC_WSP
+ default y
+
+config PPC_CHROMA
+ bool "PowerEN PCIe Chroma Card"
select EPAPR_BOOT
select PPC_WSP
default y
ccflags-y += -mno-minimal-toc
-obj-y += setup.o ics.o
-obj-$(CONFIG_PPC_PSR2) += psr2.o opb_pic.o
+obj-y += setup.o ics.o wsp.o
+obj-$(CONFIG_PPC_PSR2) += psr2.o
+obj-$(CONFIG_PPC_CHROMA) += chroma.o h8.o
+obj-$(CONFIG_PPC_WSP) += opb_pic.o
obj-$(CONFIG_PPC_WSP) += scom_wsp.o
obj-$(CONFIG_SMP) += smp.o scom_smp.o
obj-$(CONFIG_PCI) += wsp_pci.o
-obj-$(CONFIG_PCI_MSI) += msi.o
\ No newline at end of file
+obj-$(CONFIG_PCI_MSI) += msi.o
--- /dev/null
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+
+#include <asm/machdep.h>
+#include <asm/system.h>
+#include <asm/udbg.h>
+
+#include "ics.h"
+#include "wsp.h"
+
+void __init chroma_setup_arch(void)
+{
+ wsp_setup_arch();
+ wsp_setup_h8();
+
+}
+
+static int __init chroma_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,wsp-chroma"))
+ return 0;
+
+ return 1;
+}
+
+define_machine(chroma_md) {
+ .name = "Chroma PCIe",
+ .probe = chroma_probe,
+ .setup_arch = chroma_setup_arch,
+ .restart = wsp_h8_restart,
+ .power_off = wsp_h8_power_off,
+ .halt = wsp_halt,
+ .calibrate_decr = generic_calibrate_decr,
+ .init_IRQ = wsp_setup_irq,
+ .progress = udbg_progress,
+ .power_save = book3e_idle,
+};
+
+machine_arch_initcall(chroma_md, wsp_probe_devices);
--- /dev/null
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+#include "wsp.h"
+
+/*
+ * The UART connection to the H8 is over ttyS1 which is just a 16550.
+ * We assume that FW has it setup right and no one messes with it.
+ */
+
+
+static u8 __iomem *h8;
+
+#define RBR 0 /* Receiver Buffer Register */
+#define THR 0 /* Transmitter Holding Register */
+#define LSR 5 /* Line Status Register */
+#define LSR_DR 0x01 /* LSR value for Data-Ready */
+#define LSR_THRE 0x20 /* LSR value for Transmitter-Holding-Register-Empty */
+static void wsp_h8_putc(int c)
+{
+ u8 lsr;
+
+ do {
+ lsr = readb(h8 + LSR);
+ } while ((lsr & LSR_THRE) != LSR_THRE);
+ writeb(c, h8 + THR);
+}
+
+static int wsp_h8_getc(void)
+{
+ u8 lsr;
+
+ do {
+ lsr = readb(h8 + LSR);
+ } while ((lsr & LSR_DR) != LSR_DR);
+
+ return readb(h8 + RBR);
+}
+
+static void wsp_h8_puts(const char *s, int sz)
+{
+ int i;
+
+ for (i = 0; i < sz; i++) {
+ wsp_h8_putc(s[i]);
+
+ /* no flow control so wait for echo */
+ wsp_h8_getc();
+ }
+ wsp_h8_putc('\r');
+ wsp_h8_putc('\n');
+}
+
+static void wsp_h8_terminal_cmd(const char *cmd, int sz)
+{
+ hard_irq_disable();
+ wsp_h8_puts(cmd, sz);
+ /* should never return, but just in case */
+ for (;;)
+ continue;
+}
+
+
+void wsp_h8_restart(char *cmd)
+{
+ static const char restart[] = "warm-reset";
+
+ (void)cmd;
+ wsp_h8_terminal_cmd(restart, sizeof(restart) - 1);
+}
+
+void wsp_h8_power_off(void)
+{
+ static const char off[] = "power-off";
+
+ wsp_h8_terminal_cmd(off, sizeof(off) - 1);
+}
+
+static void __iomem *wsp_h8_getaddr(void)
+{
+ struct device_node *aliases;
+ struct device_node *uart;
+ struct property *path;
+ void __iomem *va = NULL;
+
+ /*
+ * there is nothing in the devtree to tell us which is mapped
+ * to the H8, but se know it is the second serial port.
+ */
+
+ aliases = of_find_node_by_path("/aliases");
+ if (aliases == NULL)
+ return NULL;
+
+ path = of_find_property(aliases, "serial1", NULL);
+ if (path == NULL)
+ goto out;
+
+ uart = of_find_node_by_path(path->value);
+ if (uart == NULL)
+ goto out;
+
+ va = of_iomap(uart, 0);
+
+ /* remove it so no one messes with it */
+ of_detach_node(uart);
+ of_node_put(uart);
+
+out:
+ of_node_put(aliases);
+
+ return va;
+}
+
+void __init wsp_setup_h8(void)
+{
+ h8 = wsp_h8_getaddr();
+
+ /* Devtree change? lets hard map it anyway */
+ if (h8 == NULL) {
+ pr_warn("UART to H8 could not be found");
+ h8 = ioremap(0xffc0008000ULL, 0x100);
+ }
+}
#include <linux/mm.h>
#include <linux/of.h>
#include <linux/smp.h>
+#include <linux/time.h>
#include <asm/machdep.h>
#include <asm/system.h>
-#include <asm/time.h>
#include <asm/udbg.h>
#include "ics.h"
static void psr2_spin(void)
{
hard_irq_disable();
- for (;;) ;
+ for (;;)
+ continue;
}
static void psr2_restart(char *cmd)
psr2_spin();
}
-static int psr2_probe_devices(void)
-{
- struct device_node *np;
-
- /* Our RTC is a ds1500. It seems to be programatically compatible
- * with the ds1511 for which we have a driver so let's use that
- */
- np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
- if (np != NULL) {
- struct resource res;
- if (of_address_to_resource(np, 0, &res) == 0)
- platform_device_register_simple("ds1511", 0, &res, 1);
- }
- return 0;
-}
-machine_arch_initcall(psr2_md, psr2_probe_devices);
-
-static void __init psr2_setup_arch(void)
-{
- /* init to some ~sane value until calibrate_delay() runs */
- loops_per_jiffy = 50000000;
-
- scom_init_wsp();
-
- /* Setup SMP callback */
-#ifdef CONFIG_SMP
- a2_setup_smp();
-#endif
-#ifdef CONFIG_PCI
- wsp_setup_pci();
-#endif
-
-}
-
static int __init psr2_probe(void)
{
unsigned long root = of_get_flat_dt_root();
+ if (of_flat_dt_is_compatible(root, "ibm,wsp-chroma")) {
+ /* chroma systems also claim they are psr2s */
+ return 0;
+ }
+
if (!of_flat_dt_is_compatible(root, "ibm,psr2"))
return 0;
return 1;
}
-static void __init psr2_init_irq(void)
-{
- wsp_init_irq();
- opb_pic_init();
-}
-
define_machine(psr2_md) {
.name = "PSR2 A2",
.probe = psr2_probe,
- .setup_arch = psr2_setup_arch,
+ .setup_arch = wsp_setup_arch,
.restart = psr2_restart,
.power_off = psr2_spin,
.halt = psr2_spin,
.calibrate_decr = generic_calibrate_decr,
- .init_IRQ = psr2_init_irq,
+ .init_IRQ = wsp_setup_irq,
.progress = udbg_progress,
.power_save = book3e_idle,
};
+
+machine_arch_initcall(psr2_md, wsp_probe_devices);
--- /dev/null
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+
+#include <asm/scom.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+#define WSP_SOC_COMPATIBLE "ibm,wsp-soc"
+#define PBIC_COMPATIBLE "ibm,wsp-pbic"
+#define COPRO_COMPATIBLE "ibm,wsp-coprocessor"
+
+static int __init wsp_probe_buses(void)
+{
+ static __initdata struct of_device_id bus_ids[] = {
+ /*
+ * every node in between needs to be here or you won't
+ * find it
+ */
+ { .compatible = WSP_SOC_COMPATIBLE, },
+ { .compatible = PBIC_COMPATIBLE, },
+ { .compatible = COPRO_COMPATIBLE, },
+ {},
+ };
+ of_platform_bus_probe(NULL, bus_ids, NULL);
+
+ return 0;
+}
+
+void __init wsp_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ scom_init_wsp();
+
+ /* Setup SMP callback */
+#ifdef CONFIG_SMP
+ a2_setup_smp();
+#endif
+#ifdef CONFIG_PCI
+ wsp_setup_pci();
+#endif
+}
+
+void __init wsp_setup_irq(void)
+{
+ wsp_init_irq();
+ opb_pic_init();
+}
+
+
+int __init wsp_probe_devices(void)
+{
+ struct device_node *np;
+
+ /* Our RTC is a ds1500. It seems to be programatically compatible
+ * with the ds1511 for which we have a driver so let's use that
+ */
+ np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+ if (np != NULL) {
+ struct resource res;
+ if (of_address_to_resource(np, 0, &res) == 0)
+ platform_device_register_simple("ds1511", 0, &res, 1);
+ }
+
+ wsp_probe_buses();
+
+ return 0;
+}
+
+void wsp_halt(void)
+{
+ u64 val;
+ scom_map_t m;
+ struct device_node *dn;
+ struct device_node *mine;
+ struct device_node *me;
+
+ me = of_get_cpu_node(smp_processor_id(), NULL);
+ mine = scom_find_parent(me);
+
+ /* This will halt all the A2s but not power off the chip */
+ for_each_node_with_property(dn, "scom-controller") {
+ if (dn == mine)
+ continue;
+ m = scom_map(dn, 0, 1);
+
+ /* read-modify-write it so the HW probe does not get
+ * confused */
+ val = scom_read(m, 0);
+ val |= 1;
+ scom_write(m, 0, val);
+ scom_unmap(m);
+ }
+ m = scom_map(mine, 0, 1);
+ val = scom_read(m, 0);
+ val |= 1;
+ scom_write(m, 0, val);
+ /* should never return */
+ scom_unmap(m);
+}
/* Devtree compatible strings for major devices */
#define PCIE_COMPATIBLE "ibm,wsp-pciex"
+extern void wsp_setup_arch(void);
+extern void wsp_setup_irq(void);
+extern int wsp_probe_devices(void);
+extern void wsp_halt(void);
+
extern void wsp_setup_pci(void);
extern void scom_init_wsp(void);
extern void a2_setup_smp(void);
extern int a2_scom_startup_cpu(unsigned int lcpu, int thr_idx,
struct device_node *np);
-int smp_a2_cpu_bootable(unsigned int nr);
-int __devinit smp_a2_kick_cpu(int nr);
+extern int smp_a2_cpu_bootable(unsigned int nr);
+extern int __devinit smp_a2_kick_cpu(int nr);
+
+extern void opb_pic_init(void);
-void opb_pic_init(void);
+/* chroma specific managment */
+extern void wsp_h8_restart(char *cmd);
+extern void wsp_h8_power_off(void);
+extern void __init wsp_setup_h8(void);
#endif /* __WSP_H */
projects / users / willy / pagecache.git / commitdiff