arm64: dts: xilinx: align GPIO hog names with dtschema

The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200916155715.21009-8-krzk@kernel.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 4f801721564fbbb116c8e56a558701e2042a045c..f1255f635dfd7c898104d2d92c6c157681a7f19e 100644 (file)
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -203,25 +203,25 @@
                gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
                                "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
                                "", "", "", "", "", "", "", "", "";
-               gtr-sel0 {
+               gtr-sel0-hog {
                        gpio-hog;
                        gpios = <0 0>;
                        output-low; /* PCIE = 0, DP = 1 */
                        line-name = "sel0";
                };
-               gtr-sel1 {
+               gtr-sel1-hog {
                        gpio-hog;
                        gpios = <1 0>;
                        output-high; /* PCIE = 0, DP = 1 */
                        line-name = "sel1";
                };
-               gtr-sel2 {
+               gtr-sel2-hog {
                        gpio-hog;
                        gpios = <2 0>;
                        output-high; /* PCIE = 0, USB0 = 1 */
                        line-name = "sel2";
                };
-               gtr-sel3 {
+               gtr-sel3-hog {
                        gpio-hog;
                        gpios = <3 0>;
                        output-high; /* PCIE = 0, SATA = 1 */