powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields

The PCI-e addressing was originally patterned of the MPC8548CDS
which has PCI1, PCI2, and PCI-e.  Since this board only has
PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS
board.  This does that by cutting the PCI/PCI-e I/O sizes from
16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000
(the hole where PCI2 I/O would have been).

This also fixes a typo where an extra zero made an 8MB range a 128MB
range, removes the hole left by PCI2 from the aliases, and sets the
clocks to match the oscillators that are actually on the board.

With accompanying u-boot updates, PCI-e has been validated with
both a sky2 card (1148:9e00) and an e1000 card (8086:108b).

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 9eefe00ed25358500beb19a58583a2bb3fb98a09..94a3322517103cdb639d9506f6b2ce7342071cd9 100644 (file)
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -26,8 +26,7 @@
                serial0 = &serial0;
                serial1 = &serial1;
                pci0 = &pci0;
-               /* pci1 doesn't have a corresponding physical connector */
-               pci2 = &pci2;
+               pci1 = &pci1;
        };
 
        cpus {
@@ -381,7 +380,7 @@
                bus-range = <0 0>;
                ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
                          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
-               clock-frequency = <66666666>;
+               clock-frequency = <66000000>;
                #interrupt-cells = <1>;
                #size-cells = <2>;
                #address-cells = <3>;
@@ -390,7 +389,7 @@
                device_type = "pci";
        };
 
-       pci2: pcie@e000a000 {
+       pci1: pcie@e000a000 {
                interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
                interrupt-map = <
 
@@ -403,9 +402,9 @@
                interrupt-parent = <&mpic>;
                interrupts = <0x1a 0x2>;
                bus-range = <0x0 0xff>;
-               ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-                         0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
-               clock-frequency = <33333333>;
+               ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+                         0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
+               clock-frequency = <33000000>;
                #interrupt-cells = <1>;
                #size-cells = <2>;
                #address-cells = <3>;
@@ -419,11 +418,11 @@
                        device_type = "pci";
                        ranges = <0x02000000 0x0 0xa0000000
                                  0x02000000 0x0 0xa0000000
-                                 0x0 0x20000000
+                                 0x0 0x10000000
 
                                  0x01000000 0x0 0x00000000
                                  0x01000000 0x0 0x00000000
-                                 0x0 0x08000000>;
+                                 0x0 0x00800000>;
                };
        };
 };