ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)

TQMa7x (revision 01xxx) uses a LM75A temperature sensor.
The two sensors use different I2C addresses, so we can set both sensors
simultaneously.

Signed-off-by: João Rodrigues <jrodrigues@ubimet.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a468310808d619371d3dabe8f6b5e1a3e9..3fc3130f9defe4da6905870081d3bc661334a463 100644 (file)
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@
                };
        };
 
-       /* NXP SE97BTP with temperature sensor + eeprom */
+       /* LM75A temperature sensor, TQMa7x 01xx */
+       lm75a: temperature-sensor@48 {
+               compatible = "national,lm75a";
+               reg = <0x48>;
+       };
+
+       /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
        se97b: temperature-sensor-eeprom@1e {
                compatible = "nxp,se97b", "jedec,jc-42.4-temp";
                reg = <0x1e>;
-               status = "okay";
        };
 
        /* ST M24C64 */