--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license. When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018-2022 Intel Corporation. All rights reserved.
+//
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <sound/hdaudio_ext.h>
+#include <sound/sof.h>
+#include <sound/pcm_params.h>
+
+#include "../sof-priv.h"
+#include "../ops.h"
+#include "hda.h"
+
+#define HDA_SKL_WAIT_TIMEOUT 500 /* 500 msec */
+#define HDA_SKL_CLDMA_MAX_BUFFER_SIZE (32 * PAGE_SIZE)
+
+/* Stream Reset */
+#define HDA_CL_SD_CTL_SRST_SHIFT 0
+#define HDA_CL_SD_CTL_SRST(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_SRST_SHIFT)
+
+/* Stream Run */
+#define HDA_CL_SD_CTL_RUN_SHIFT 1
+#define HDA_CL_SD_CTL_RUN(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_RUN_SHIFT)
+
+/* Interrupt On Completion Enable */
+#define HDA_CL_SD_CTL_IOCE_SHIFT 2
+#define HDA_CL_SD_CTL_IOCE(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_IOCE_SHIFT)
+
+/* FIFO Error Interrupt Enable */
+#define HDA_CL_SD_CTL_FEIE_SHIFT 3
+#define HDA_CL_SD_CTL_FEIE(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_FEIE_SHIFT)
+
+/* Descriptor Error Interrupt Enable */
+#define HDA_CL_SD_CTL_DEIE_SHIFT 4
+#define HDA_CL_SD_CTL_DEIE(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_DEIE_SHIFT)
+
+/* FIFO Limit Change */
+#define HDA_CL_SD_CTL_FIFOLC_SHIFT 5
+#define HDA_CL_SD_CTL_FIFOLC(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_FIFOLC_SHIFT)
+
+/* Stripe Control */
+#define HDA_CL_SD_CTL_STRIPE_SHIFT 16
+#define HDA_CL_SD_CTL_STRIPE(x) (((x) & 0x3) << \
+ HDA_CL_SD_CTL_STRIPE_SHIFT)
+
+/* Traffic Priority */
+#define HDA_CL_SD_CTL_TP_SHIFT 18
+#define HDA_CL_SD_CTL_TP(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_TP_SHIFT)
+
+/* Bidirectional Direction Control */
+#define HDA_CL_SD_CTL_DIR_SHIFT 19
+#define HDA_CL_SD_CTL_DIR(x) (((x) & 0x1) << \
+ HDA_CL_SD_CTL_DIR_SHIFT)
+
+/* Stream Number */
+#define HDA_CL_SD_CTL_STRM_SHIFT 20
+#define HDA_CL_SD_CTL_STRM(x) (((x) & 0xf) << \
+ HDA_CL_SD_CTL_STRM_SHIFT)
+
+#define HDA_CL_SD_CTL_INT(x) \
+ (HDA_CL_SD_CTL_IOCE(x) | \
+ HDA_CL_SD_CTL_FEIE(x) | \
+ HDA_CL_SD_CTL_DEIE(x))
+
+#define HDA_CL_SD_CTL_INT_MASK \
+ (HDA_CL_SD_CTL_IOCE(1) | \
+ HDA_CL_SD_CTL_FEIE(1) | \
+ HDA_CL_SD_CTL_DEIE(1))
+
+#define DMA_ADDRESS_128_BITS_ALIGNMENT 7
+#define BDL_ALIGN(x) ((x) >> DMA_ADDRESS_128_BITS_ALIGNMENT)
+
+/* Buffer Descriptor List Lower Base Address */
+#define HDA_CL_SD_BDLPLBA_SHIFT 7
+#define HDA_CL_SD_BDLPLBA_MASK (0x1ffffff << HDA_CL_SD_BDLPLBA_SHIFT)
+#define HDA_CL_SD_BDLPLBA(x) \
+ ((BDL_ALIGN(lower_32_bits(x)) << HDA_CL_SD_BDLPLBA_SHIFT) & \
+ HDA_CL_SD_BDLPLBA_MASK)
+
+/* Buffer Descriptor List Upper Base Address */
+#define HDA_CL_SD_BDLPUBA_SHIFT 0
+#define HDA_CL_SD_BDLPUBA_MASK (0xffffffff << HDA_CL_SD_BDLPUBA_SHIFT)
+#define HDA_CL_SD_BDLPUBA(x) \
+ ((upper_32_bits(x) << HDA_CL_SD_BDLPUBA_SHIFT) & \
+ HDA_CL_SD_BDLPUBA_MASK)
+
+/* Software Position in Buffer Enable */
+#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT 0
+#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK \
+ (1 << HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT)
+
+#define HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(x) \
+ (((x) << HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_SHIFT) & \
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK)
+
+#define HDA_CL_DMA_SD_INT_COMPLETE 0x4
+
+static int cl_skl_cldma_setup_bdle(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab_data,
+ __le32 **bdlp, int size, int with_ioc)
+{
+ phys_addr_t addr = virt_to_phys(dmab_data->area);
+ __le32 *bdl = *bdlp;
+
+ /*
+ * This code is simplified by using one fragment of physical memory and assuming
+ * all the code fits. This could be improved with scatter-gather but the firmware
+ * size is limited by DSP memory anyways
+ */
+ bdl[0] = cpu_to_le32(lower_32_bits(addr));
+ bdl[1] = cpu_to_le32(upper_32_bits(addr));
+ bdl[2] = cpu_to_le32(size);
+ bdl[3] = (!with_ioc) ? 0 : cpu_to_le32(0x01);
+
+ return 1; /* one fragment */
+}
+
+static void cl_skl_cldma_stream_run(struct snd_sof_dev *sdev, bool enable)
+{
+ int sd_offset = SOF_HDA_ADSP_LOADER_BASE;
+ unsigned char val;
+ int retries;
+ u32 run = enable ? 0x1 : 0;
+
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_RUN(1), HDA_CL_SD_CTL_RUN(run));
+
+ retries = 300;
+ do {
+ udelay(3);
+
+ /* waiting for hardware to report the stream Run bit set */
+ val = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL);
+ val &= HDA_CL_SD_CTL_RUN(1);
+ if (enable && val)
+ break;
+ else if (!enable && !val)
+ break;
+ } while (--retries);
+
+ if (retries == 0)
+ dev_err(sdev->dev, "%s: failed to set Run bit=%d enable=%d\n",
+ __func__, val, enable);
+}
+
+static void cl_skl_cldma_stream_clear(struct snd_sof_dev *sdev)
+{
+ int sd_offset = SOF_HDA_ADSP_LOADER_BASE;
+
+ /* make sure Run bit is cleared before setting stream register */
+ cl_skl_cldma_stream_run(sdev, 0);
+
+ /* Disable the Interrupt On Completion, FIFO Error Interrupt,
+ * Descriptor Error Interrupt and set the cldma stream number to 0.
+ */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_INT_MASK, HDA_CL_SD_CTL_INT(0));
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_STRM(0xf), HDA_CL_SD_CTL_STRM(0));
+
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL, HDA_CL_SD_BDLPLBA(0));
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU, 0);
+
+ /* Set the Cyclic Buffer Length to 0. */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CBL, 0);
+ /* Set the Last Valid Index. */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_LVI, 0);
+}
+
+static void cl_skl_cldma_setup_spb(struct snd_sof_dev *sdev,
+ unsigned int size, bool enable)
+{
+ int sd_offset = SOF_DSP_REG_CL_SPBFIFO;
+
+ if (enable)
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(1));
+
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPIB, size);
+}
+
+static void cl_skl_cldma_set_intr(struct snd_sof_dev *sdev, bool enable)
+{
+ u32 val = enable ? HDA_DSP_ADSPIC_CL_DMA : 0;
+
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
+ HDA_DSP_ADSPIC_CL_DMA, val);
+}
+
+static void cl_skl_cldma_cleanup_spb(struct snd_sof_dev *sdev)
+{
+ int sd_offset = SOF_DSP_REG_CL_SPBFIFO;
+
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
+ HDA_CL_SPBFIFO_SPBFCCTL_SPIBE(0));
+
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SPBFIFO_SPIB, 0);
+}
+
+static void cl_skl_cldma_setup_controller(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab_bdl,
+ unsigned int max_size, u32 count)
+{
+ int sd_offset = SOF_HDA_ADSP_LOADER_BASE;
+
+ /* Clear the stream first and then set it. */
+ cl_skl_cldma_stream_clear(sdev);
+
+ /* setting the stream register */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPL,
+ HDA_CL_SD_BDLPLBA(dmab_bdl->addr));
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_BDLPU,
+ HDA_CL_SD_BDLPUBA(dmab_bdl->addr));
+
+ /* Set the Cyclic Buffer Length. */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CBL, max_size);
+ /* Set the Last Valid Index. */
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_LVI, count - 1);
+
+ /* Set the Interrupt On Completion, FIFO Error Interrupt,
+ * Descriptor Error Interrupt and the cldma stream number.
+ */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_INT_MASK, HDA_CL_SD_CTL_INT(1));
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_CTL,
+ HDA_CL_SD_CTL_STRM(0xf),
+ HDA_CL_SD_CTL_STRM(1));
+}
+
+static int cl_stream_prepare_skl(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab,
+ struct snd_dma_buffer *dmab_bdl)
+
+{
+ unsigned int bufsize = HDA_SKL_CLDMA_MAX_BUFFER_SIZE;
+ __le32 *bdl;
+ int frags;
+ int ret;
+
+ ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, sdev->dev, bufsize, dmab);
+ if (ret < 0) {
+ dev_err(sdev->dev, "%s: failed to alloc fw buffer: %x\n", __func__, ret);
+ return ret;
+ }
+
+ ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, sdev->dev, bufsize, dmab_bdl);
+ if (ret < 0) {
+ dev_err(sdev->dev, "%s: failed to alloc blde: %x\n", __func__, ret);
+ snd_dma_free_pages(dmab);
+ return ret;
+ }
+
+ bdl = (__le32 *)dmab_bdl->area;
+ frags = cl_skl_cldma_setup_bdle(sdev, dmab, &bdl, bufsize, 1);
+ cl_skl_cldma_setup_controller(sdev, dmab_bdl, bufsize, frags);
+
+ return ret;
+}
+
+static void cl_cleanup_skl(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab,
+ struct snd_dma_buffer *dmab_bdl)
+{
+ cl_skl_cldma_cleanup_spb(sdev);
+ cl_skl_cldma_stream_clear(sdev);
+ snd_dma_free_pages(dmab);
+ snd_dma_free_pages(dmab_bdl);
+}
+
+static int cl_dsp_init_skl(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab,
+ struct snd_dma_buffer *dmab_bdl)
+{
+ struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+ const struct sof_intel_dsp_desc *chip = hda->desc;
+ unsigned int status;
+ u32 flags;
+ int ret;
+
+ /* check if the init_core is already enabled, if yes, reset and make it run,
+ * if not, powerdown and enable it again.
+ */
+ if (hda_dsp_core_is_enabled(sdev, chip->init_core_mask)) {
+ /* if enabled, reset it, and run the init_core. */
+ ret = hda_dsp_core_stall_reset(sdev, chip->init_core_mask);
+ if (ret < 0)
+ goto err;
+
+ ret = hda_dsp_core_run(sdev, chip->init_core_mask);
+ if (ret < 0) {
+ dev_err(sdev->dev, "%s: dsp core start failed %d\n", __func__, ret);
+ goto err;
+ }
+ } else {
+ /* if not enabled, power down it first and then powerup and run
+ * the init_core.
+ */
+ ret = hda_dsp_core_reset_power_down(sdev, chip->init_core_mask);
+ if (ret < 0) {
+ dev_err(sdev->dev, "%s: dsp core0 disable fail: %d\n", __func__, ret);
+ goto err;
+ }
+ ret = hda_dsp_enable_core(sdev, chip->init_core_mask);
+ if (ret < 0) {
+ dev_err(sdev->dev, "%s: dsp core0 enable fail: %d\n", __func__, ret);
+ goto err;
+ }
+ }
+
+ /* prepare DMA for code loader stream */
+ ret = cl_stream_prepare_skl(sdev, dmab, dmab_bdl);
+ if (ret < 0) {
+ dev_err(sdev->dev, "%s: dma prepare fw loading err: %x\n", __func__, ret);
+ return ret;
+ }
+
+ /* enable the interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
+ HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC);
+
+ /* enable IPC DONE interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
+ HDA_DSP_REG_HIPCCTL_DONE,
+ HDA_DSP_REG_HIPCCTL_DONE);
+
+ /* enable IPC BUSY interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, chip->ipc_ctl,
+ HDA_DSP_REG_HIPCCTL_BUSY,
+ HDA_DSP_REG_HIPCCTL_BUSY);
+
+ /* polling the ROM init status information. */
+ ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
+ chip->rom_status_reg, status,
+ (FSR_TO_STATE_CODE(status)
+ == FSR_STATE_INIT_DONE),
+ HDA_DSP_REG_POLL_INTERVAL_US,
+ chip->rom_init_timeout *
+ USEC_PER_MSEC);
+ if (ret < 0)
+ goto err;
+
+ return ret;
+
+err:
+ flags = SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX;
+
+ snd_sof_dsp_dbg_dump(sdev, "Boot failed\n", flags);
+ cl_cleanup_skl(sdev, dmab, dmab_bdl);
+ hda_dsp_core_reset_power_down(sdev, chip->init_core_mask);
+ return ret;
+}
+
+static void cl_skl_cldma_fill_buffer(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab,
+ unsigned int bufsize,
+ unsigned int copysize,
+ const void *curr_pos,
+ bool intr_enable)
+{
+ struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+
+ /* copy the image into the buffer with the maximum buffer size. */
+ unsigned int size = (bufsize == copysize) ? bufsize : copysize;
+
+ memcpy(dmab->area, curr_pos, size);
+
+ /* Set the wait condition for every load. */
+ hda->code_loading = 1;
+
+ /* Set the interrupt. */
+ if (intr_enable)
+ cl_skl_cldma_set_intr(sdev, true);
+
+ /* Set the SPB. */
+ cl_skl_cldma_setup_spb(sdev, size, true);
+
+ /* Trigger the code loading stream. */
+ cl_skl_cldma_stream_run(sdev, true);
+}
+
+static int cl_skl_cldma_wait_interruptible(struct snd_sof_dev *sdev,
+ bool intr_wait)
+{
+ struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+ const struct sof_intel_dsp_desc *chip = hda->desc;
+ int sd_offset = SOF_HDA_ADSP_LOADER_BASE;
+ u8 cl_dma_intr_status;
+
+ /*
+ * Wait for CLDMA interrupt to inform the binary segment transfer is
+ * complete.
+ */
+ if (!wait_event_timeout(hda->waitq, !hda->code_loading,
+ msecs_to_jiffies(HDA_SKL_WAIT_TIMEOUT))) {
+ dev_err(sdev->dev, "cldma copy timeout\n");
+ dev_err(sdev->dev, "ROM code=%#x: FW status=%#x\n",
+ snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_ROM_ERROR),
+ snd_sof_dsp_read(sdev, HDA_DSP_BAR, chip->rom_status_reg));
+ return -EIO;
+ }
+
+ /* now check DMA interrupt status */
+ cl_dma_intr_status = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ sd_offset + SOF_HDA_ADSP_REG_CL_SD_STS);
+
+ if (!(cl_dma_intr_status & HDA_CL_DMA_SD_INT_COMPLETE)) {
+ dev_err(sdev->dev, "cldma copy failed\n");
+ return -EIO;
+ }
+
+ dev_dbg(sdev->dev, "cldma buffer copy complete\n");
+ return 0;
+}
+
+static int
+cl_skl_cldma_copy_to_buf(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab,
+ const void *bin,
+ u32 total_size, u32 bufsize)
+{
+ unsigned int bytes_left = total_size;
+ const void *curr_pos = bin;
+ int ret;
+
+ if (total_size <= 0)
+ return -EINVAL;
+
+ while (bytes_left > 0) {
+ if (bytes_left > bufsize) {
+ dev_dbg(sdev->dev, "cldma copy %#x bytes\n", bufsize);
+
+ cl_skl_cldma_fill_buffer(sdev, dmab, bufsize, bufsize, curr_pos, true);
+
+ ret = cl_skl_cldma_wait_interruptible(sdev, false);
+ if (ret < 0) {
+ dev_err(sdev->dev, "%s: fw failed to load. %#x bytes remaining\n",
+ __func__, bytes_left);
+ return ret;
+ }
+
+ bytes_left -= bufsize;
+ curr_pos += bufsize;
+ } else {
+ dev_dbg(sdev->dev, "cldma copy %#x bytes\n", bytes_left);
+
+ cl_skl_cldma_set_intr(sdev, false);
+ cl_skl_cldma_fill_buffer(sdev, dmab, bufsize, bytes_left, curr_pos, false);
+ return 0;
+ }
+ }
+
+ return bytes_left;
+}
+
+static int cl_copy_fw_skl(struct snd_sof_dev *sdev,
+ struct snd_dma_buffer *dmab)
+
+{
+ struct snd_sof_pdata *plat_data = sdev->pdata;
+ const struct firmware *fw = plat_data->fw;
+ struct firmware stripped_firmware;
+ unsigned int bufsize = HDA_SKL_CLDMA_MAX_BUFFER_SIZE;
+ int ret;
+
+ stripped_firmware.data = plat_data->fw->data + plat_data->fw_offset;
+ stripped_firmware.size = plat_data->fw->size - plat_data->fw_offset;
+
+ dev_dbg(sdev->dev, "firmware size: %#zx buffer size %#x\n", fw->size, bufsize);
+
+ ret = cl_skl_cldma_copy_to_buf(sdev, dmab, stripped_firmware.data,
+ stripped_firmware.size, bufsize);
+ if (ret < 0)
+ dev_err(sdev->dev, "%s: fw copy failed %d\n", __func__, ret);
+
+ return ret;
+}
+
+int hda_dsp_cl_boot_firmware_skl(struct snd_sof_dev *sdev)
+{
+ struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata;
+ const struct sof_intel_dsp_desc *chip = hda->desc;
+ struct snd_dma_buffer dmab_bdl;
+ struct snd_dma_buffer dmab;
+ unsigned int reg;
+ u32 flags;
+ int ret;
+
+ ret = cl_dsp_init_skl(sdev, &dmab, &dmab_bdl);
+
+ /* retry enabling core and ROM load. seemed to help */
+ if (ret < 0) {
+ ret = cl_dsp_init_skl(sdev, &dmab, &dmab_bdl);
+ if (ret < 0) {
+ dev_err(sdev->dev, "Error code=%#x: FW status=%#x\n",
+ snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_ROM_ERROR),
+ snd_sof_dsp_read(sdev, HDA_DSP_BAR, chip->rom_status_reg));
+ dev_err(sdev->dev, "Core En/ROM load fail:%d\n", ret);
+ return ret;
+ }
+ }
+
+ dev_dbg(sdev->dev, "ROM init successful\n");
+
+ /* at this point DSP ROM has been initialized and should be ready for
+ * code loading and firmware boot
+ */
+ ret = cl_copy_fw_skl(sdev, &dmab);
+ if (ret < 0) {
+ dev_err(sdev->dev, "%s: load firmware failed : %d\n", __func__, ret);
+ goto err;
+ }
+
+ ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
+ chip->rom_status_reg, reg,
+ (FSR_TO_STATE_CODE(reg)
+ == FSR_STATE_ROM_BASEFW_ENTERED),
+ HDA_DSP_REG_POLL_INTERVAL_US,
+ HDA_DSP_BASEFW_TIMEOUT_US);
+
+ dev_dbg(sdev->dev, "Firmware download successful, booting...\n");
+
+ cl_skl_cldma_stream_run(sdev, false);
+ cl_cleanup_skl(sdev, &dmab, &dmab_bdl);
+
+ if (!ret)
+ return chip->init_core_mask;
+
+ return ret;
+
+err:
+ flags = SOF_DBG_DUMP_PCI | SOF_DBG_DUMP_MBOX;
+
+ snd_sof_dsp_dbg_dump(sdev, "Boot failed\n", flags);
+
+ /* power down DSP */
+ hda_dsp_core_reset_power_down(sdev, chip->init_core_mask);
+ cl_skl_cldma_stream_run(sdev, false);
+ cl_cleanup_skl(sdev, &dmab, &dmab_bdl);
+
+ dev_err(sdev->dev, "%s: load fw failed err: %d\n", __func__, ret);
+ return ret;
+}
projects / users / hch / block.git / commitdiff