}
EXPORT_SYMBOL(hdmi_avi_infoframe_init);
+static int hdmi_avi_infoframe_check_only(const struct hdmi_avi_infoframe *frame)
+{
+ if (frame->type != HDMI_INFOFRAME_TYPE_AVI ||
+ frame->version != 2 ||
+ frame->length != HDMI_AVI_INFOFRAME_SIZE)
+ return -EINVAL;
+
+ if (frame->picture_aspect > HDMI_PICTURE_ASPECT_16_9)
+ return -EINVAL;
+
+ return 0;
+}
+
/**
- * hdmi_avi_infoframe_pack() - write HDMI AVI infoframe to binary buffer
+ * hdmi_avi_infoframe_check() - check a HDMI AVI infoframe
+ * @frame: HDMI AVI infoframe
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int hdmi_avi_infoframe_check(struct hdmi_avi_infoframe *frame)
+{
+ return hdmi_avi_infoframe_check_only(frame);
+}
+EXPORT_SYMBOL(hdmi_avi_infoframe_check);
+
+/**
+ * hdmi_avi_infoframe_pack_only() - write HDMI AVI infoframe to binary buffer
* @frame: HDMI AVI infoframe
* @buffer: destination buffer
* @size: size of buffer
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
-ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame, void *buffer,
- size_t size)
+ssize_t hdmi_avi_infoframe_pack_only(const struct hdmi_avi_infoframe *frame,
+ void *buffer, size_t size)
{
u8 *ptr = buffer;
size_t length;
+ int ret;
+
+ ret = hdmi_avi_infoframe_check_only(frame);
+ if (ret)
+ return ret;
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
if (size < length)
return -ENOSPC;
- if (frame->picture_aspect > HDMI_PICTURE_ASPECT_16_9)
- return -EINVAL;
-
memset(buffer, 0, size);
ptr[0] = frame->type;
return length;
}
+EXPORT_SYMBOL(hdmi_avi_infoframe_pack_only);
+
+/**
+ * hdmi_avi_infoframe_pack() - check a HDMI AVI infoframe,
+ * and write it to binary buffer
+ * @frame: HDMI AVI infoframe
+ * @buffer: destination buffer
+ * @size: size of buffer
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields, after which it packs the information
+ * contained in the @frame structure into a binary representation that
+ * can be written into the corresponding controller registers. This function
+ * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns the number of bytes packed into the binary buffer or a negative
+ * error code on failure.
+ */
+ssize_t hdmi_avi_infoframe_pack(struct hdmi_avi_infoframe *frame,
+ void *buffer, size_t size)
+{
+ int ret;
+
+ ret = hdmi_avi_infoframe_check(frame);
+ if (ret)
+ return ret;
+
+ return hdmi_avi_infoframe_pack_only(frame, buffer, size);
+}
EXPORT_SYMBOL(hdmi_avi_infoframe_pack);
/**
}
EXPORT_SYMBOL(hdmi_spd_infoframe_init);
+static int hdmi_spd_infoframe_check_only(const struct hdmi_spd_infoframe *frame)
+{
+ if (frame->type != HDMI_INFOFRAME_TYPE_SPD ||
+ frame->version != 1 ||
+ frame->length != HDMI_SPD_INFOFRAME_SIZE)
+ return -EINVAL;
+
+ return 0;
+}
+
/**
- * hdmi_spd_infoframe_pack() - write HDMI SPD infoframe to binary buffer
+ * hdmi_spd_infoframe_check() - check a HDMI SPD infoframe
+ * @frame: HDMI SPD infoframe
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int hdmi_spd_infoframe_check(struct hdmi_spd_infoframe *frame)
+{
+ return hdmi_spd_infoframe_check_only(frame);
+}
+EXPORT_SYMBOL(hdmi_spd_infoframe_check);
+
+/**
+ * hdmi_spd_infoframe_pack_only() - write HDMI SPD infoframe to binary buffer
* @frame: HDMI SPD infoframe
* @buffer: destination buffer
* @size: size of buffer
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
-ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame, void *buffer,
- size_t size)
+ssize_t hdmi_spd_infoframe_pack_only(const struct hdmi_spd_infoframe *frame,
+ void *buffer, size_t size)
{
u8 *ptr = buffer;
size_t length;
+ int ret;
+
+ ret = hdmi_spd_infoframe_check_only(frame);
+ if (ret)
+ return ret;
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
return length;
}
+EXPORT_SYMBOL(hdmi_spd_infoframe_pack_only);
+
+/**
+ * hdmi_spd_infoframe_pack() - check a HDMI SPD infoframe,
+ * and write it to binary buffer
+ * @frame: HDMI SPD infoframe
+ * @buffer: destination buffer
+ * @size: size of buffer
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields, after which it packs the information
+ * contained in the @frame structure into a binary representation that
+ * can be written into the corresponding controller registers. This function
+ * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns the number of bytes packed into the binary buffer or a negative
+ * error code on failure.
+ */
+ssize_t hdmi_spd_infoframe_pack(struct hdmi_spd_infoframe *frame,
+ void *buffer, size_t size)
+{
+ int ret;
+
+ ret = hdmi_spd_infoframe_check(frame);
+ if (ret)
+ return ret;
+
+ return hdmi_spd_infoframe_pack_only(frame, buffer, size);
+}
EXPORT_SYMBOL(hdmi_spd_infoframe_pack);
/**
}
EXPORT_SYMBOL(hdmi_audio_infoframe_init);
+static int hdmi_audio_infoframe_check_only(const struct hdmi_audio_infoframe *frame)
+{
+ if (frame->type != HDMI_INFOFRAME_TYPE_AUDIO ||
+ frame->version != 1 ||
+ frame->length != HDMI_AUDIO_INFOFRAME_SIZE)
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * hdmi_audio_infoframe_check() - check a HDMI audio infoframe
+ * @frame: HDMI audio infoframe
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int hdmi_audio_infoframe_check(struct hdmi_audio_infoframe *frame)
+{
+ return hdmi_audio_infoframe_check_only(frame);
+}
+EXPORT_SYMBOL(hdmi_audio_infoframe_check);
+
/**
- * hdmi_audio_infoframe_pack() - write HDMI audio infoframe to binary buffer
+ * hdmi_audio_infoframe_pack_only() - write HDMI audio infoframe to binary buffer
* @frame: HDMI audio infoframe
* @buffer: destination buffer
* @size: size of buffer
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
-ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
- void *buffer, size_t size)
+ssize_t hdmi_audio_infoframe_pack_only(const struct hdmi_audio_infoframe *frame,
+ void *buffer, size_t size)
{
unsigned char channels;
u8 *ptr = buffer;
size_t length;
+ int ret;
+
+ ret = hdmi_audio_infoframe_check_only(frame);
+ if (ret)
+ return ret;
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
return length;
}
+EXPORT_SYMBOL(hdmi_audio_infoframe_pack_only);
+
+/**
+ * hdmi_audio_infoframe_pack() - check a HDMI Audio infoframe,
+ * and write it to binary buffer
+ * @frame: HDMI Audio infoframe
+ * @buffer: destination buffer
+ * @size: size of buffer
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields, after which it packs the information
+ * contained in the @frame structure into a binary representation that
+ * can be written into the corresponding controller registers. This function
+ * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns the number of bytes packed into the binary buffer or a negative
+ * error code on failure.
+ */
+ssize_t hdmi_audio_infoframe_pack(struct hdmi_audio_infoframe *frame,
+ void *buffer, size_t size)
+{
+ int ret;
+
+ ret = hdmi_audio_infoframe_check(frame);
+ if (ret)
+ return ret;
+
+ return hdmi_audio_infoframe_pack_only(frame, buffer, size);
+}
EXPORT_SYMBOL(hdmi_audio_infoframe_pack);
/**
* value
*/
frame->s3d_struct = HDMI_3D_STRUCTURE_INVALID;
+ frame->length = 4;
return 0;
}
return 4;
}
+static int hdmi_vendor_infoframe_check_only(const struct hdmi_vendor_infoframe *frame)
+{
+ if (frame->type != HDMI_INFOFRAME_TYPE_VENDOR ||
+ frame->version != 1 ||
+ frame->oui != HDMI_IEEE_OUI)
+ return -EINVAL;
+
+ /* only one of those can be supplied */
+ if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
+ return -EINVAL;
+
+ if (frame->length != hdmi_vendor_infoframe_length(frame))
+ return -EINVAL;
+
+ return 0;
+}
+
/**
- * hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary buffer
+ * hdmi_vendor_infoframe_check() - check a HDMI vendor infoframe
+ * @frame: HDMI infoframe
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int hdmi_vendor_infoframe_check(struct hdmi_vendor_infoframe *frame)
+{
+ frame->length = hdmi_vendor_infoframe_length(frame);
+
+ return hdmi_vendor_infoframe_check_only(frame);
+}
+EXPORT_SYMBOL(hdmi_vendor_infoframe_check);
+
+/**
+ * hdmi_vendor_infoframe_pack_only() - write a HDMI vendor infoframe to binary buffer
* @frame: HDMI infoframe
* @buffer: destination buffer
* @size: size of buffer
* Returns the number of bytes packed into the binary buffer or a negative
* error code on failure.
*/
-ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
- void *buffer, size_t size)
+ssize_t hdmi_vendor_infoframe_pack_only(const struct hdmi_vendor_infoframe *frame,
+ void *buffer, size_t size)
{
u8 *ptr = buffer;
size_t length;
+ int ret;
- /* only one of those can be supplied */
- if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID)
- return -EINVAL;
-
- frame->length = hdmi_vendor_infoframe_length(frame);
+ ret = hdmi_vendor_infoframe_check_only(frame);
+ if (ret)
+ return ret;
length = HDMI_INFOFRAME_HEADER_SIZE + frame->length;
return length;
}
+EXPORT_SYMBOL(hdmi_vendor_infoframe_pack_only);
+
+/**
+ * hdmi_vendor_infoframe_pack() - check a HDMI Vendor infoframe,
+ * and write it to binary buffer
+ * @frame: HDMI Vendor infoframe
+ * @buffer: destination buffer
+ * @size: size of buffer
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields, after which it packs the information
+ * contained in the @frame structure into a binary representation that
+ * can be written into the corresponding controller registers. This function
+ * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns the number of bytes packed into the binary buffer or a negative
+ * error code on failure.
+ */
+ssize_t hdmi_vendor_infoframe_pack(struct hdmi_vendor_infoframe *frame,
+ void *buffer, size_t size)
+{
+ int ret;
+
+ ret = hdmi_vendor_infoframe_check(frame);
+ if (ret)
+ return ret;
+
+ return hdmi_vendor_infoframe_pack_only(frame, buffer, size);
+}
EXPORT_SYMBOL(hdmi_vendor_infoframe_pack);
+static int
+hdmi_vendor_any_infoframe_check_only(const union hdmi_vendor_any_infoframe *frame)
+{
+ if (frame->any.type != HDMI_INFOFRAME_TYPE_VENDOR ||
+ frame->any.version != 1)
+ return -EINVAL;
+
+ return 0;
+}
+
/*
- * hdmi_vendor_any_infoframe_pack() - write a vendor infoframe to binary buffer
+ * hdmi_vendor_any_infoframe_check() - check a vendor infoframe
+ */
+static int
+hdmi_vendor_any_infoframe_check(union hdmi_vendor_any_infoframe *frame)
+{
+ int ret;
+
+ ret = hdmi_vendor_any_infoframe_check_only(frame);
+ if (ret)
+ return ret;
+
+ /* we only know about HDMI vendor infoframes */
+ if (frame->any.oui != HDMI_IEEE_OUI)
+ return -EINVAL;
+
+ return hdmi_vendor_infoframe_check(&frame->hdmi);
+}
+
+/*
+ * hdmi_vendor_any_infoframe_pack_only() - write a vendor infoframe to binary buffer
*/
static ssize_t
-hdmi_vendor_any_infoframe_pack(union hdmi_vendor_any_infoframe *frame,
- void *buffer, size_t size)
+hdmi_vendor_any_infoframe_pack_only(const union hdmi_vendor_any_infoframe *frame,
+ void *buffer, size_t size)
{
+ int ret;
+
+ ret = hdmi_vendor_any_infoframe_check_only(frame);
+ if (ret)
+ return ret;
+
/* we only know about HDMI vendor infoframes */
if (frame->any.oui != HDMI_IEEE_OUI)
return -EINVAL;
- return hdmi_vendor_infoframe_pack(&frame->hdmi, buffer, size);
+ return hdmi_vendor_infoframe_pack_only(&frame->hdmi, buffer, size);
+}
+
+/*
+ * hdmi_vendor_any_infoframe_pack() - check a vendor infoframe,
+ * and write it to binary buffer
+ */
+static ssize_t
+hdmi_vendor_any_infoframe_pack(union hdmi_vendor_any_infoframe *frame,
+ void *buffer, size_t size)
+{
+ int ret;
+
+ ret = hdmi_vendor_any_infoframe_check(frame);
+ if (ret)
+ return ret;
+
+ return hdmi_vendor_any_infoframe_pack_only(frame, buffer, size);
+}
+
+/**
+ * hdmi_infoframe_check() - check a HDMI infoframe
+ * @frame: HDMI infoframe
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+int
+hdmi_infoframe_check(union hdmi_infoframe *frame)
+{
+ switch (frame->any.type) {
+ case HDMI_INFOFRAME_TYPE_AVI:
+ return hdmi_avi_infoframe_check(&frame->avi);
+ case HDMI_INFOFRAME_TYPE_SPD:
+ return hdmi_spd_infoframe_check(&frame->spd);
+ case HDMI_INFOFRAME_TYPE_AUDIO:
+ return hdmi_audio_infoframe_check(&frame->audio);
+ case HDMI_INFOFRAME_TYPE_VENDOR:
+ return hdmi_vendor_any_infoframe_check(&frame->vendor);
+ default:
+ WARN(1, "Bad infoframe type %d\n", frame->any.type);
+ return -EINVAL;
+ }
}
+EXPORT_SYMBOL(hdmi_infoframe_check);
/**
- * hdmi_infoframe_pack() - write a HDMI infoframe to binary buffer
+ * hdmi_infoframe_pack_only() - write a HDMI infoframe to binary buffer
* @frame: HDMI infoframe
* @buffer: destination buffer
* @size: size of buffer
* error code on failure.
*/
ssize_t
-hdmi_infoframe_pack(union hdmi_infoframe *frame, void *buffer, size_t size)
+hdmi_infoframe_pack_only(const union hdmi_infoframe *frame, void *buffer, size_t size)
+{
+ ssize_t length;
+
+ switch (frame->any.type) {
+ case HDMI_INFOFRAME_TYPE_AVI:
+ length = hdmi_avi_infoframe_pack_only(&frame->avi,
+ buffer, size);
+ break;
+ case HDMI_INFOFRAME_TYPE_SPD:
+ length = hdmi_spd_infoframe_pack_only(&frame->spd,
+ buffer, size);
+ break;
+ case HDMI_INFOFRAME_TYPE_AUDIO:
+ length = hdmi_audio_infoframe_pack_only(&frame->audio,
+ buffer, size);
+ break;
+ case HDMI_INFOFRAME_TYPE_VENDOR:
+ length = hdmi_vendor_any_infoframe_pack_only(&frame->vendor,
+ buffer, size);
+ break;
+ default:
+ WARN(1, "Bad infoframe type %d\n", frame->any.type);
+ length = -EINVAL;
+ }
+
+ return length;
+}
+EXPORT_SYMBOL(hdmi_infoframe_pack_only);
+
+/**
+ * hdmi_infoframe_pack() - check a HDMI infoframe,
+ * and write it to binary buffer
+ * @frame: HDMI infoframe
+ * @buffer: destination buffer
+ * @size: size of buffer
+ *
+ * Validates that the infoframe is consistent and updates derived fields
+ * (eg. length) based on other fields, after which it packs the information
+ * contained in the @frame structure into a binary representation that
+ * can be written into the corresponding controller registers. This function
+ * also computes the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns the number of bytes packed into the binary buffer or a negative
+ * error code on failure.
+ */
+ssize_t
+hdmi_infoframe_pack(union hdmi_infoframe *frame,
+ void *buffer, size_t size)
{
ssize_t length;
projects / users / hch / misc.git / commitdiff