+++ /dev/null
-NVIDIA Legacy Interrupt Controller
-
-All Tegra SoCs contain a legacy interrupt controller that routes
-interrupts to the GIC, and also serves as a wakeup source. It is also
-referred to as "ictlr", hence the name of the binding.
-
-The HW block exposes a number of interrupt controllers, each
-implementing a set of 32 interrupts.
-
-Required properties:
-
-- compatible : should be: "nvidia,tegra<chip>-ictlr". The LIC on
- subsequent SoCs remained backwards-compatible with Tegra30, so on
- Tegra generations later than Tegra30 the compatible value should
- include "nvidia,tegra30-ictlr".
-- reg : Specifies base physical address and size of the registers.
- Each controller must be described separately (Tegra20 has 4 of them,
- whereas Tegra30 and later have 5).
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source. The value must be 3.
-
-Notes:
-
-- Because this HW ultimately routes interrupts to the GIC, the
- interrupt specifier must be that of the GIC.
-- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
- are explicitly forbidden.
-
-Example:
-
- ictlr: interrupt-controller@60004000 {
- compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr";
- reg = <0x60004000 64>,
- <0x60004100 64>,
- <0x60004200 64>,
- <0x60004300 64>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&intc>;
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/nvidia,tegra20-ictlr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 Legacy Interrupt Controller
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+description: >
+ All Tegra SoCs contain a legacy interrupt controller that routes interrupts to
+ the GIC, and also serves as a wakeup source. It is also referred to as
+ "ictlr", hence the name of the binding.
+
+ The HW block exposes a number of interrupt controllers, each implementing a
+ set of 32 interrupts.
+
+ Notes:
+ - Because this HW ultimately routes interrupts to the GIC, the
+ interrupt specifier must be that of the GIC.
+ - Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
+ are explicitly forbidden.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - nvidia,tegra114-ictlr
+ - nvidia,tegra124-ictlr
+ - const: nvidia,tegra30-ictlr
+ - enum:
+ - nvidia,tegra20-ictlr
+ - nvidia,tegra30-ictlr
+
+ reg:
+ description: Each entry is a block of 32 interrupts
+ minItems: 4
+ maxItems: 5
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 3
+
+required:
+ - compatible
+ - reg
+ - interrupt-controller
+ - '#interrupt-cells'
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra20-ictlr
+ then:
+ properties:
+ reg:
+ maxItems: 4
+ else:
+ properties:
+ reg:
+ minItems: 5
+
+examples:
+ - |
+ interrupt-controller@60004000 {
+ compatible = "nvidia,tegra20-ictlr";
+ reg = <0x60004000 64>,
+ <0x60004100 64>,
+ <0x60004200 64>,
+ <0x60004300 64>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };