drm/sun4i: hdmi: Add A31 specific DDC register definitions

The DDC block for the HDMI controller is different on the A31.

This patch adds the register definitions.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-9-wens@csie.org

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
index 3057e31219f647bac1a0106e5342a7770475f76b..ee42ae7e5a21cea9f714fc6f50c542de2af1ae08 100644 (file)
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
@@ -153,6 +153,37 @@
 
 #define SUN4I_HDMI_DDC_FIFO_SIZE       16
 
+/* A31 specific */
+#define SUN6I_HDMI_DDC_CTRL_REG                0x500
+#define SUN6I_HDMI_DDC_CTRL_RESET              BIT(31)
+#define SUN6I_HDMI_DDC_CTRL_START_CMD          BIT(27)
+#define SUN6I_HDMI_DDC_CTRL_SDA_ENABLE         BIT(6)
+#define SUN6I_HDMI_DDC_CTRL_SCL_ENABLE         BIT(4)
+#define SUN6I_HDMI_DDC_CTRL_ENABLE             BIT(0)
+
+#define SUN6I_HDMI_DDC_CMD_REG         0x508
+#define SUN6I_HDMI_DDC_CMD_BYTE_COUNT(count)   ((count) << 16)
+/* command types in lower 3 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_ADDR_REG                0x50c
+#define SUN6I_HDMI_DDC_ADDR_SEGMENT(seg)       (((seg) & 0xff) << 24)
+#define SUN6I_HDMI_DDC_ADDR_EDDC(addr)         (((addr) & 0xff) << 16)
+#define SUN6I_HDMI_DDC_ADDR_OFFSET(off)                (((off) & 0xff) << 8)
+#define SUN6I_HDMI_DDC_ADDR_SLAVE(addr)                (((addr) & 0xff) << 1)
+
+#define SUN6I_HDMI_DDC_INT_STATUS_REG  0x514
+#define SUN6I_HDMI_DDC_INT_STATUS_TIMEOUT      BIT(8)
+/* lower 8 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_FIFO_CTRL_REG   0x518
+#define SUN6I_HDMI_DDC_FIFO_CTRL_CLEAR         BIT(15)
+/* lower 9 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_CLK_REG         0x520
+/* DDC CLK bit fields are the same, but the formula is not */
+
+#define SUN6I_HDMI_DDC_FIFO_DATA_REG   0x580
+
 enum sun4i_hdmi_pkt_type {
        SUN4I_HDMI_PKT_AVI = 2,
        SUN4I_HDMI_PKT_END = 15,