nvmem-cell-names = "calibration-data";
};
- thermal_zones: thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <100>;
- polling-delay = <500>;
- thermal-sensors = <&thermal 0>;
- sustainable-power = <5000>;
-
- trips {
- threshold: trip-point0 {
- temperature = <68000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- target: trip-point1 {
- temperature = <80000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit: cpu-crit {
- temperature = <115000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&target>;
- cooling-device = <&cpu0
- THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>,
- <&cpu1
- THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>,
- <&cpu2
- THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>,
- <&cpu3
- THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- contribution = <3072>;
- };
- map1 {
- trip = <&target>;
- cooling-device = <&cpu4
- THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>,
- <&cpu5
- THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>,
- <&cpu6
- THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>,
- <&cpu7
- THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- contribution = <1024>;
- };
- };
- };
-
- /* The tzts1 ~ tzts6 don't need to polling */
- /* The tzts1 ~ tzts6 don't need to thermal throttle */
-
- tzts1: tzts1 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 1>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts2: tzts2 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 2>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts3: tzts3 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 3>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts4: tzts4 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 4>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tzts5: tzts5 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 5>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
-
- tztsABB: tztsABB {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&thermal 6>;
- sustainable-power = <5000>;
- trips {};
- cooling-maps {};
- };
- };
-
+ svs: svs@1100bc00 {
+ compatible = "mediatek,mt8183-svs";
+ reg = <0 0x1100bc00 0 0x400>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_THERM>;
+ clock-names = "main";
+ nvmem-cells = <&svs_calibration>,
+ <&thermal_calibration>;
+ nvmem-cell-names = "svs-calibration-data",
+ "t-calibration-data";
+ };
+
pwm0: pwm@1100e000 {
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
--- /dev/null
- #address-cells = <0>;
+ // SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ /*
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com>
+ */
+
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ / {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ timebase-frequency = <25000000>;
+
+ cpu0: cpu@0 {
+ compatible = "thead,c906", "riscv";
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-block-size = <64>;
+ d-cache-sets = <512>;
+ d-cache-size = <65536>;
+ i-cache-block-size = <64>;
+ i-cache-sets = <128>;
+ i-cache-size = <32768>;
+ mmu-type = "riscv,sv39";
+ riscv,isa = "rv64imafdc";
+ riscv,isa-base = "rv64i";
+ riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr",
+ "zifencei", "zihpm";
+
+ cpu0_intc: interrupt-controller {
+ compatible = "riscv,cpu-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ clock-output-names = "osc_25m";
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&plic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-noncoherent;
+ ranges;
+
+ gpio0: gpio@3020000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x3020000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@3021000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x3021000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@3022000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x3022000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio3: gpio@3023000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x3023000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ uart0: serial@4140000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x04140000 0x100>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@4150000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x04150000 0x100>;
+ interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@4160000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x04160000 0x100>;
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@4170000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x04170000 0x100>;
+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart4: serial@41c0000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x041c0000 0x100>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ plic: interrupt-controller@70000000 {
+ reg = <0x70000000 0x4000000>;
+ interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ riscv,ndev = <101>;
+ };
+
+ clint: timer@74000000 {
+ reg = <0x74000000 0x10000>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>;
+ };
+ };
+ };
projects / users / jedix / linux-maple.git / commitdiff