ARM: dts: imx6dl-wandboard: Add SDHC1 and SDHC2 ports

Wandboard has a SD card slot on the baseboard connected to SDHC1 and a
BCM4329 (Wifi + Bluetooth chip) connected to SDHC2.

Add support for these ports.

While at it, provide the card detect gpio on SDHC3 and also fix indentation on
MX6QDL_PAD_GPIO_0__CCM_CLKO1 hog pin.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index fbe0f1916f6ad05bd21fd819ff89d3e5b5913caa..fe9a01d01538ece823ef8354d2d7166d746cc525 100644 (file)
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -82,7 +82,9 @@
        hog {
                pinctrl_hog: hoggrp {
                        fsl,pins = <
-                               MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+                               MX6QDL_PAD_GPIO_2__GPIO1_IO02   0x80000000
+                               MX6QDL_PAD_EIM_DA9__GPIO3_IO09  0x80000000
                        >;
                };
        };
@@ -110,8 +112,23 @@
        status = "okay";
 };
 
+&usdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc1_2>;
+       cd-gpios = <&gpio1 2 0>;
+       status = "okay";
+};
+
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2_2>;
+       non-removable;
+       status = "okay";
+};
+
 &usdhc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usdhc3_2>;
+       cd-gpios = <&gpio3 9 0>;
        status = "okay";
 };