arm64: dts: qcom: sc8180x: rename labels for DSI nodes

Currently in board files MDSS and DSI nodes stay apart, because labels
for DSI nodes do not have the mdss_ prefix. It was found that grouping
all display-related notes is more useful.

To keep all display-related nodes close in the board files, change DSI
node labels from dsi_* to mdss_dsi_*.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230531011623.3808538-10-dmitry.baryshkov@linaro.org

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 33493032b6e5e4425e5fa93e579bd055873343f4..d3ae185356365d74833e3b2ac60219490d54c83c 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2733,14 +2733,14 @@
                                        port@1 {
                                                reg = <1>;
                                                dpu_intf1_out: endpoint {
-                                                       remote-endpoint = <&dsi0_in>;
+                                                       remote-endpoint = <&mdss_dsi0_in>;
                                                };
                                        };
 
                                        port@2 {
                                                reg = <2>;
                                                dpu_intf2_out: endpoint {
-                                                       remote-endpoint = <&dsi1_in>;
+                                                       remote-endpoint = <&mdss_dsi1_in>;
                                                };
                                        };
 
@@ -2784,7 +2784,7 @@
                                };
                        };
 
-                       dsi0: dsi@ae94000 {
+                       mdss_dsi0: dsi@ae94000 {
                                compatible = "qcom,mdss-dsi-ctrl";
                                reg = <0 0x0ae94000 0 0x400>;
                                reg-names = "dsi_ctrl";
@@ -2808,7 +2808,7 @@
                                operating-points-v2 = <&dsi_opp_table>;
                                power-domains = <&rpmhpd SC8180X_MMCX>;
 
-                               phys = <&dsi0_phy>;
+                               phys = <&mdss_dsi0_phy>;
                                phy-names = "dsi";
 
                                status = "disabled";
@@ -2819,14 +2819,14 @@
 
                                        port@0 {
                                                reg = <0>;
-                                               dsi0_in: endpoint {
+                                               mdss_dsi0_in: endpoint {
                                                        remote-endpoint = <&dpu_intf1_out>;
                                                };
                                        };
 
                                        port@1 {
                                                reg = <1>;
-                                               dsi0_out: endpoint {
+                                               mdss_dsi0_out: endpoint {
                                                };
                                        };
                                };
@@ -2851,7 +2851,7 @@
                                };
                        };
 
-                       dsi0_phy: dsi-phy@ae94400 {
+                       mdss_dsi0_phy: dsi-phy@ae94400 {
                                compatible = "qcom,dsi-phy-7nm";
                                reg = <0 0x0ae94400 0 0x200>,
                                      <0 0x0ae94600 0 0x280>,
@@ -2870,7 +2870,7 @@
                                status = "disabled";
                        };
 
-                       dsi1: dsi@ae96000 {
+                       mdss_dsi1: dsi@ae96000 {
                                compatible = "qcom,mdss-dsi-ctrl";
                                reg = <0 0x0ae96000 0 0x400>;
                                reg-names = "dsi_ctrl";
@@ -2894,7 +2894,7 @@
                                operating-points-v2 = <&dsi_opp_table>;
                                power-domains = <&rpmhpd SC8180X_MMCX>;
 
-                               phys = <&dsi1_phy>;
+                               phys = <&mdss_dsi1_phy>;
                                phy-names = "dsi";
 
                                status = "disabled";
@@ -2905,20 +2905,20 @@
 
                                        port@0 {
                                                reg = <0>;
-                                               dsi1_in: endpoint {
+                                               mdss_dsi1_in: endpoint {
                                                        remote-endpoint = <&dpu_intf2_out>;
                                                };
                                        };
 
                                        port@1 {
                                                reg = <1>;
-                                               dsi1_out: endpoint {
+                                               mdss_dsi1_out: endpoint {
                                                };
                                        };
                                };
                        };
 
-                       dsi1_phy: dsi-phy@ae96400 {
+                       mdss_dsi1_phy: dsi-phy@ae96400 {
                                compatible = "qcom,dsi-phy-7nm";
                                reg = <0 0x0ae96400 0 0x200>,
                                      <0 0x0ae96600 0 0x280>,