ASoC: fsl_xcvr: Enable 2 * TX bit clock for spdif only case

The bit 10 in TX_DPTH_CTRL register controls the TX clock rate.
If this bit is set, TX datapath clock should be = 2* TX bit rate.
If this bit is not set, TX datapath clock should be 10* TX bit rate.

As the spdif only case, we always use 2 * TX bit clock, so
this bit need to be set.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1700617373-6472-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
index fa0a15263c66dc117dcdd7886de6e9e19660ff22..77f8e2394bf93f0d4cc49d4ee474f019442c6536 100644 (file)
--- a/sound/soc/fsl/fsl_xcvr.c
+++ b/sound/soc/fsl/fsl_xcvr.c
@@ -414,6 +414,16 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream,
 
        switch (xcvr->mode) {
        case FSL_XCVR_MODE_SPDIF:
+               if (xcvr->soc_data->spdif_only && tx) {
+                       ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_TX_DPTH_CTRL_SET,
+                                                FSL_XCVR_TX_DPTH_CTRL_BYPASS_FEM,
+                                                FSL_XCVR_TX_DPTH_CTRL_BYPASS_FEM);
+                       if (ret < 0) {
+                               dev_err(dai->dev, "Failed to set bypass fem: %d\n", ret);
+                               return ret;
+                       }
+               }
+               fallthrough;
        case FSL_XCVR_MODE_ARC:
                if (tx) {
                        ret = fsl_xcvr_en_aud_pll(xcvr, fout);