rx_count = CFG_GET_NUM_RXQS_NIC_IF(conf6x, lio->ifidx);
tx_count = CFG_GET_NUM_TXQS_NIC_IF(conf6x, lio->ifidx);
} else if (OCTEON_CN23XX_PF(oct)) {
- max_combined = lio->linfo.num_txpciq;
+ if (oct->sriov_info.sriov_enabled) {
+ max_combined = lio->linfo.num_txpciq;
+ } else {
+ struct octeon_config *conf23_pf =
+ CHIP_CONF(oct, cn23xx_pf);
+
+ max_combined = CFG_GET_IQ_MAX_Q(conf23_pf);
+ }
combined_count = oct->num_iqs;
} else if (OCTEON_CN23XX_VF(oct)) {
u64 reg_val = 0ULL;
kfree(oct->irq_name_storage);
oct->irq_name_storage = NULL;
+
+ if (octeon_allocate_ioq_vector(oct, num_ioqs)) {
+ dev_err(&oct->pci_dev->dev, "OCTEON: ioq vector allocation failed\n");
+ return -1;
+ }
+
if (octeon_setup_interrupt(oct, num_ioqs)) {
dev_info(&oct->pci_dev->dev, "Setup interrupt failed\n");
- return 1;
+ return -1;
}
/* Enable Octeon device interrupts */
combined_count = channel->combined_count;
if (OCTEON_CN23XX_PF(oct)) {
- max_combined = channel->max_combined;
+ if (oct->sriov_info.sriov_enabled) {
+ max_combined = lio->linfo.num_txpciq;
+ } else {
+ struct octeon_config *conf23_pf =
+ CHIP_CONF(oct,
+ cn23xx_pf);
+
+ max_combined =
+ CFG_GET_IQ_MAX_Q(conf23_pf);
+ }
} else if (OCTEON_CN23XX_VF(oct)) {
u64 reg_val = 0ULL;
u64 ctrl = CN23XX_VF_SLI_IQ_PKT_CONTROL64(0);
if (lio_reset_queues(dev, combined_count))
return -EINVAL;
- lio_irq_reallocate_irqs(oct, combined_count);
if (stopped)
dev->netdev_ops->ndo_open(dev);
ering->rx_jumbo_max_pending = 0;
}
+static int lio_23xx_reconfigure_queue_count(struct lio *lio)
+{
+ struct octeon_device *oct = lio->oct_dev;
+ struct liquidio_if_cfg_context *ctx;
+ u32 resp_size, ctx_size, data_size;
+ struct liquidio_if_cfg_resp *resp;
+ struct octeon_soft_command *sc;
+ union oct_nic_if_cfg if_cfg;
+ struct lio_version *vdata;
+ u32 ifidx_or_pfnum;
+ int retval;
+ int j;
+
+ resp_size = sizeof(struct liquidio_if_cfg_resp);
+ ctx_size = sizeof(struct liquidio_if_cfg_context);
+ data_size = sizeof(struct lio_version);
+ sc = (struct octeon_soft_command *)
+ octeon_alloc_soft_command(oct, data_size,
+ resp_size, ctx_size);
+ if (!sc) {
+ dev_err(&oct->pci_dev->dev, "%s: Failed to allocate soft command\n",
+ __func__);
+ return -1;
+ }
+
+ resp = (struct liquidio_if_cfg_resp *)sc->virtrptr;
+ ctx = (struct liquidio_if_cfg_context *)sc->ctxptr;
+ vdata = (struct lio_version *)sc->virtdptr;
+
+ vdata->major = (__force u16)cpu_to_be16(LIQUIDIO_BASE_MAJOR_VERSION);
+ vdata->minor = (__force u16)cpu_to_be16(LIQUIDIO_BASE_MINOR_VERSION);
+ vdata->micro = (__force u16)cpu_to_be16(LIQUIDIO_BASE_MICRO_VERSION);
+
+ ifidx_or_pfnum = oct->pf_num;
+ WRITE_ONCE(ctx->cond, 0);
+ ctx->octeon_id = lio_get_device_id(oct);
+ init_waitqueue_head(&ctx->wc);
+
+ if_cfg.u64 = 0;
+ if_cfg.s.num_iqueues = oct->sriov_info.num_pf_rings;
+ if_cfg.s.num_oqueues = oct->sriov_info.num_pf_rings;
+ if_cfg.s.base_queue = oct->sriov_info.pf_srn;
+ if_cfg.s.gmx_port_id = oct->pf_num;
+
+ sc->iq_no = 0;
+ octeon_prepare_soft_command(oct, sc, OPCODE_NIC,
+ OPCODE_NIC_QCOUNT_UPDATE, 0,
+ if_cfg.u64, 0);
+ sc->callback = lio_if_cfg_callback;
+ sc->callback_arg = sc;
+ sc->wait_time = LIO_IFCFG_WAIT_TIME;
+
+ retval = octeon_send_soft_command(oct, sc);
+ if (retval == IQ_SEND_FAILED) {
+ dev_err(&oct->pci_dev->dev,
+ "iq/oq config failed status: %x\n",
+ retval);
+ goto qcount_update_fail;
+ }
+
+ if (sleep_cond(&ctx->wc, &ctx->cond) == -EINTR) {
+ dev_err(&oct->pci_dev->dev, "Wait interrupted\n");
+ return -1;
+ }
+
+ retval = resp->status;
+ if (retval) {
+ dev_err(&oct->pci_dev->dev, "iq/oq config failed\n");
+ goto qcount_update_fail;
+ }
+
+ octeon_swap_8B_data((u64 *)(&resp->cfg_info),
+ (sizeof(struct liquidio_if_cfg_info)) >> 3);
+
+ lio->ifidx = ifidx_or_pfnum;
+ lio->linfo.num_rxpciq = hweight64(resp->cfg_info.iqmask);
+ lio->linfo.num_txpciq = hweight64(resp->cfg_info.iqmask);
+ for (j = 0; j < lio->linfo.num_rxpciq; j++) {
+ lio->linfo.rxpciq[j].u64 =
+ resp->cfg_info.linfo.rxpciq[j].u64;
+ }
+
+ for (j = 0; j < lio->linfo.num_txpciq; j++) {
+ lio->linfo.txpciq[j].u64 =
+ resp->cfg_info.linfo.txpciq[j].u64;
+ }
+
+ lio->linfo.hw_addr = resp->cfg_info.linfo.hw_addr;
+ lio->linfo.gmxport = resp->cfg_info.linfo.gmxport;
+ lio->linfo.link.u64 = resp->cfg_info.linfo.link.u64;
+ lio->txq = lio->linfo.txpciq[0].s.q_no;
+ lio->rxq = lio->linfo.rxpciq[0].s.q_no;
+
+ octeon_free_soft_command(oct, sc);
+ dev_info(&oct->pci_dev->dev, "Queue count updated to %d\n",
+ lio->linfo.num_rxpciq);
+
+ return 0;
+
+qcount_update_fail:
+ octeon_free_soft_command(oct, sc);
+
+ return -1;
+}
+
static int lio_reset_queues(struct net_device *netdev, uint32_t num_qs)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
+ int i, queue_count_update = 0;
struct napi_struct *napi, *n;
- int i, update = 0;
+ int ret;
+
+ schedule_timeout_uninterruptible(msecs_to_jiffies(100));
if (wait_for_pending_requests(oct))
dev_err(&oct->pci_dev->dev, "There were pending requests\n");
dev_err(&oct->pci_dev->dev, "IQ had pending instructions\n");
if (octeon_set_io_queues_off(oct)) {
- dev_err(&oct->pci_dev->dev, "setting io queues off failed\n");
+ dev_err(&oct->pci_dev->dev, "Setting io queues off failed\n");
return -1;
}
netif_napi_del(napi);
if (num_qs != oct->num_iqs) {
- netif_set_real_num_rx_queues(netdev, num_qs);
- netif_set_real_num_tx_queues(netdev, num_qs);
- update = 1;
+ ret = netif_set_real_num_rx_queues(netdev, num_qs);
+ if (ret) {
+ dev_err(&oct->pci_dev->dev,
+ "Setting real number rx failed\n");
+ return ret;
+ }
+
+ ret = netif_set_real_num_tx_queues(netdev, num_qs);
+ if (ret) {
+ dev_err(&oct->pci_dev->dev,
+ "Setting real number tx failed\n");
+ return ret;
+ }
+
+ /* The value of queue_count_update decides whether it is the
+ * queue count or the descriptor count that is being
+ * re-configured.
+ */
+ queue_count_update = 1;
+ }
+
+ /* Re-configuration of queues can happen in two scenarios, SRIOV enabled
+ * and SRIOV disabled. Few things like recreating queue zero, resetting
+ * glists and IRQs are required for both. For the latter, some more
+ * steps like updating sriov_info for the octeon device need to be done.
+ */
+ if (queue_count_update) {
+ lio_delete_glists(lio);
+
+ /* Delete mbox for PF which is SRIOV disabled because sriov_info
+ * will be now changed.
+ */
+ if ((OCTEON_CN23XX_PF(oct)) && !oct->sriov_info.sriov_enabled)
+ oct->fn_list.free_mbox(oct);
}
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES(oct); i++) {
octeon_delete_instr_queue(oct, i);
}
+ if (queue_count_update) {
+ /* For PF re-configure sriov related information */
+ if ((OCTEON_CN23XX_PF(oct)) &&
+ !oct->sriov_info.sriov_enabled) {
+ oct->sriov_info.num_pf_rings = num_qs;
+ if (cn23xx_sriov_config(oct)) {
+ dev_err(&oct->pci_dev->dev,
+ "Queue reset aborted: SRIOV config failed\n");
+ return -1;
+ }
+
+ num_qs = oct->sriov_info.num_pf_rings;
+ }
+ }
+
if (oct->fn_list.setup_device_regs(oct)) {
dev_err(&oct->pci_dev->dev, "Failed to configure device registers\n");
return -1;
}
- if (liquidio_setup_io_queues(oct, 0, num_qs, num_qs)) {
- dev_err(&oct->pci_dev->dev, "IO queues initialization failed\n");
- return -1;
+ /* The following are needed in case of queue count re-configuration and
+ * not for descriptor count re-configuration.
+ */
+ if (queue_count_update) {
+ if (octeon_setup_instr_queues(oct))
+ return -1;
+
+ if (octeon_setup_output_queues(oct))
+ return -1;
+
+ /* Recreating mbox for PF that is SRIOV disabled */
+ if (OCTEON_CN23XX_PF(oct) && !oct->sriov_info.sriov_enabled) {
+ if (oct->fn_list.setup_mbox(oct)) {
+ dev_err(&oct->pci_dev->dev, "Mailbox setup failed\n");
+ return -1;
+ }
+ }
+
+ /* Deleting and recreating IRQs whether the interface is SRIOV
+ * enabled or disabled.
+ */
+ if (lio_irq_reallocate_irqs(oct, num_qs)) {
+ dev_err(&oct->pci_dev->dev, "IRQs could not be allocated\n");
+ return -1;
+ }
+
+ /* Enable the input and output queues for this Octeon device */
+ if (oct->fn_list.enable_io_queues(oct)) {
+ dev_err(&oct->pci_dev->dev, "Failed to enable input/output queues\n");
+ return -1;
+ }
+
+ for (i = 0; i < oct->num_oqs; i++)
+ writel(oct->droq[i]->max_count,
+ oct->droq[i]->pkts_credit_reg);
+
+ /* Informing firmware about the new queue count. It is required
+ * for firmware to allocate more number of queues than those at
+ * load time.
+ */
+ if (OCTEON_CN23XX_PF(oct) && !oct->sriov_info.sriov_enabled) {
+ if (lio_23xx_reconfigure_queue_count(lio))
+ return -1;
+ }
}
- /* Enable the input and output queues for this Octeon device */
- if (oct->fn_list.enable_io_queues(oct)) {
- dev_err(&oct->pci_dev->dev, "Failed to enable input/output queues");
+ /* Once firmware is aware of the new value, queues can be recreated */
+ if (liquidio_setup_io_queues(oct, 0, num_qs, num_qs)) {
+ dev_err(&oct->pci_dev->dev, "I/O queues creation failed\n");
return -1;
}
- if (update && lio_send_queue_count_update(netdev, num_qs))
- return -1;
+ if (queue_count_update) {
+ if (lio_setup_glists(oct, lio, num_qs)) {
+ dev_err(&oct->pci_dev->dev, "Gather list allocation failed\n");
+ return -1;
+ }
+
+ /* Send firmware the information about new number of queues
+ * if the interface is a VF or a PF that is SRIOV enabled.
+ */
+ if (oct->sriov_info.sriov_enabled || OCTEON_CN23XX_VF(oct))
+ if (lio_send_queue_count_update(netdev, num_qs))
+ return -1;
+ }
return 0;
}
CFG_SET_NUM_RX_DESCS_NIC_IF(octeon_get_conf(oct), lio->ifidx,
rx_count);
- if (lio_reset_queues(netdev, lio->linfo.num_txpciq))
+ if (lio_reset_queues(netdev, oct->num_iqs))
goto err_lio_reset_queues;
if (stopped)
*/
static inline int check_txq_status(struct lio *lio)
{
- int numqs = lio->netdev->num_tx_queues;
+ int numqs = lio->netdev->real_num_tx_queues;
int ret_val = 0;
int q, iq;
i++;
}
- iq = skb_iq(lio, skb);
+ iq = skb_iq(lio->oct_dev, skb);
spin_lock(&lio->glist_lock[iq]);
list_add_tail(&g->list, &lio->glist[iq]);
spin_unlock(&lio->glist_lock[iq]);
i++;
}
- iq = skb_iq(lio, skb);
+ iq = skb_iq(lio->oct_dev, skb);
spin_lock(&lio->glist_lock[iq]);
list_add_tail(&g->list, &lio->glist[iq]);
ifstate_set(lio, LIO_IFSTATE_RUNNING);
- /* Ready for link status updates */
- lio->intf_open = 1;
-
- netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n");
-
if (OCTEON_CN23XX_PF(oct)) {
if (!oct->msix_on)
if (setup_tx_poll_fn(netdev))
return -1;
}
- start_txqs(netdev);
+ netif_tx_start_all_queues(netdev);
+
+ /* Ready for link status updates */
+ lio->intf_open = 1;
+
+ netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n");
/* tell Octeon to start forwarding packets to host */
send_rx_ctrl_cmd(lio, 1);
ifstate_reset(lio, LIO_IFSTATE_RUNNING);
- netif_tx_disable(netdev);
+ /* Stop any link updates */
+ lio->intf_open = 0;
+
+ stop_txqs(netdev);
/* Inform that netif carrier is down */
netif_carrier_off(netdev);
- lio->intf_open = 0;
+ netif_tx_disable(netdev);
+
lio->linfo.link.s.link_up = 0;
lio->link_changes++;
lio = GET_LIO(netdev);
oct = lio->oct_dev;
- q_idx = skb_iq(lio, skb);
+ q_idx = skb_iq(oct, skb);
tag = q_idx;
iq_no = lio->linfo.txpciq[q_idx].s.q_no;
struct liquidio_if_cfg_resp *resp;
struct octdev_props *props;
int retval, num_iqueues, num_oqueues;
+ int max_num_queues = 0;
union oct_nic_if_cfg if_cfg;
unsigned int base_queue;
unsigned int gmx_port_id;
sc->callback = lio_if_cfg_callback;
sc->callback_arg = sc;
- sc->wait_time = 3000;
+ sc->wait_time = LIO_IFCFG_WAIT_TIME;
retval = octeon_send_soft_command(octeon_dev, sc);
if (retval == IQ_SEND_FAILED) {
resp->cfg_info.oqmask);
goto setup_nic_dev_fail;
}
+
+ if (OCTEON_CN6XXX(octeon_dev)) {
+ max_num_queues = CFG_GET_IQ_MAX_Q(CHIP_CONF(octeon_dev,
+ cn6xxx));
+ } else if (OCTEON_CN23XX_PF(octeon_dev)) {
+ max_num_queues = CFG_GET_IQ_MAX_Q(CHIP_CONF(octeon_dev,
+ cn23xx_pf));
+ }
+
dev_dbg(&octeon_dev->pci_dev->dev,
- "interface %d, iqmask %016llx, oqmask %016llx, numiqueues %d, numoqueues %d\n",
+ "interface %d, iqmask %016llx, oqmask %016llx, numiqueues %d, numoqueues %d max_num_queues: %d\n",
i, resp->cfg_info.iqmask, resp->cfg_info.oqmask,
- num_iqueues, num_oqueues);
- netdev = alloc_etherdev_mq(LIO_SIZE, num_iqueues);
+ num_iqueues, num_oqueues, max_num_queues);
+ netdev = alloc_etherdev_mq(LIO_SIZE, max_num_queues);
if (!netdev) {
dev_err(&octeon_dev->pci_dev->dev, "Device allocation failed\n");
netdev->netdev_ops = &lionetdevops;
SWITCHDEV_SET_OPS(netdev, &lio_pf_switchdev_ops);
+ retval = netif_set_real_num_rx_queues(netdev, num_oqueues);
+ if (retval) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "setting real number rx failed\n");
+ goto setup_nic_dev_fail;
+ }
+
+ retval = netif_set_real_num_tx_queues(netdev, num_iqueues);
+ if (retval) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "setting real number tx failed\n");
+ goto setup_nic_dev_fail;
+ }
+
lio = GET_LIO(netdev);
memset(lio, 0, sizeof(struct lio));
}
atomic_set(&octeon_dev->status, OCT_DEV_MBOX_SETUP_DONE);
- if (octeon_allocate_ioq_vector(octeon_dev)) {
+ if (octeon_allocate_ioq_vector
+ (octeon_dev,
+ octeon_dev->sriov_info.num_pf_rings)) {
dev_err(&octeon_dev->pci_dev->dev, "OCTEON: ioq vector allocation failed\n");
return 1;
}
projects / users / hch / configfs.git / commitdiff