- reset-gpio-active-high: If present then the reset sequence using the GPIO
   specified in the "reset-gpio" property is reversed (H=reset state,
   L=operation state).
+- vpcie-supply: Should specify the regulator in charge of PCIe port power.
+  The regulator will be enabled when initializing the PCIe host and
+  disabled either as part of the init process or when shutting down the
+  host.
 
 Additional required properties for imx6sx-pcie:
 - clock names: Must include the following additional entries:
 
 #include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
 #include <linux/types.h>
        u32                     tx_swing_full;
        u32                     tx_swing_low;
        int                     link_gen;
+       struct regulator        *vpcie;
 };
 
 /* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */
 
 static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
 {
+       struct device *dev = imx6_pcie->pci->dev;
+
        switch (imx6_pcie->variant) {
        case IMX7D:
                reset_control_assert(imx6_pcie->pciephy_reset);
                                   IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
                break;
        }
+
+       if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
+               int ret = regulator_disable(imx6_pcie->vpcie);
+
+               if (ret)
+                       dev_err(dev, "failed to disable vpcie regulator: %d\n",
+                               ret);
+       }
 }
 
 static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
        struct device *dev = pci->dev;
        int ret;
 
+       if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
+               ret = regulator_enable(imx6_pcie->vpcie);
+               if (ret) {
+                       dev_err(dev, "failed to enable vpcie regulator: %d\n",
+                               ret);
+                       return;
+               }
+       }
+
        ret = clk_prepare_enable(imx6_pcie->pcie_phy);
        if (ret) {
                dev_err(dev, "unable to enable pcie_phy clock\n");
-               return;
+               goto err_pcie_phy;
        }
 
        ret = clk_prepare_enable(imx6_pcie->pcie_bus);
        clk_disable_unprepare(imx6_pcie->pcie_bus);
 err_pcie_bus:
        clk_disable_unprepare(imx6_pcie->pcie_phy);
+err_pcie_phy:
+       if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
+               ret = regulator_disable(imx6_pcie->vpcie);
+               if (ret)
+                       dev_err(dev, "failed to disable vpcie regulator: %d\n",
+                               ret);
+       }
 }
 
 static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
        if (ret)
                imx6_pcie->link_gen = 1;
 
+       imx6_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
+       if (IS_ERR(imx6_pcie->vpcie)) {
+               if (PTR_ERR(imx6_pcie->vpcie) == -EPROBE_DEFER)
+                       return -EPROBE_DEFER;
+               imx6_pcie->vpcie = NULL;
+       }
+
        platform_set_drvdata(pdev, imx6_pcie);
 
        ret = imx6_add_pcie_port(imx6_pcie, pdev);