watchdog: rti_wdt: Drop runtime pm reference count when watchdog is unused

Call runtime_pm_put*() if watchdog is not already started during probe and re
enable it in watchdog start as required.

On K3 SoCs, watchdogs and their corresponding CPUs are under same
power-domain, so if the reference count of unused watchdogs aren't
dropped, it will lead to CPU hotplug failures as Device Management
firmware won't allow to turn off the power-domain due to dangling
reference count.

Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
index 8e1be7ba010398907f1fbae32a89c382dae70ca0..9215793a1c814f168040688613533353b4ea0591 100644 (file)
--- a/drivers/watchdog/rti_wdt.c
+++ b/drivers/watchdog/rti_wdt.c
@@ -77,6 +77,11 @@ static int rti_wdt_start(struct watchdog_device *wdd)
 {
        u32 timer_margin;
        struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
+       int ret;
+
+       ret = pm_runtime_resume_and_get(wdd->parent);
+       if (ret)
+               return ret;
 
        /* set timeout period */
        timer_margin = (u64)wdd->timeout * wdt->freq;
@@ -343,6 +348,9 @@ static int rti_wdt_probe(struct platform_device *pdev)
        if (last_ping)
                watchdog_set_last_hw_keepalive(wdd, last_ping);
 
+       if (!watchdog_hw_running(wdd))
+               pm_runtime_put_sync(&pdev->dev);
+
        return 0;
 
 err_iomap:
@@ -357,7 +365,10 @@ static void rti_wdt_remove(struct platform_device *pdev)
        struct rti_wdt_device *wdt = platform_get_drvdata(pdev);
 
        watchdog_unregister_device(&wdt->wdd);
-       pm_runtime_put(&pdev->dev);
+
+       if (!pm_runtime_suspended(&pdev->dev))
+               pm_runtime_put(&pdev->dev);
+
        pm_runtime_disable(&pdev->dev);
 }