net: Fix misspellings of "configure" and "configuration"

Fix various misspellings of "configuration" and "configure".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
index 633b117eb13e81437c402d4ed05efd892bf68eb1..7b672ada63a3973311b2913d4f3e152033df6cf4 100644 (file)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
@@ -175,7 +175,7 @@ static int update_xoff_threshold(struct mlx5e_port_buffer *port_buffer,
  *     @port_buffer: <output> port receive buffer configuration
  *     @change: <output>
  *
- *     Update buffer configuration based on pfc configuraiton and
+ *     Update buffer configuration based on pfc configuration and
  *     priority to buffer mapping.
  *     Buffer's lossy bit is changed to:
  *             lossless if there is at least one PFC enabled priority

diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.h b/drivers/net/ethernet/qlogic/qed/qed_int.h
index d473b522afc5137f69edece72c535397623ad05d..9ad568d93ae6501c8dd3780fe5c657956ca4f4ba 100644 (file)
--- a/drivers/net/ethernet/qlogic/qed/qed_int.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.h
@@ -37,14 +37,14 @@
 #include <linux/slab.h>
 #include "qed.h"
 
-/* Fields of IGU PF CONFIGRATION REGISTER */
+/* Fields of IGU PF CONFIGURATION REGISTER */
 #define IGU_PF_CONF_FUNC_EN       (0x1 << 0)    /* function enable        */
 #define IGU_PF_CONF_MSI_MSIX_EN   (0x1 << 1)    /* MSI/MSIX enable        */
 #define IGU_PF_CONF_INT_LINE_EN   (0x1 << 2)    /* INT enable             */
 #define IGU_PF_CONF_ATTN_BIT_EN   (0x1 << 3)    /* attention enable       */
 #define IGU_PF_CONF_SINGLE_ISR_EN (0x1 << 4)    /* single ISR mode enable */
 #define IGU_PF_CONF_SIMD_MODE     (0x1 << 5)    /* simd all ones mode     */
-/* Fields of IGU VF CONFIGRATION REGISTER */
+/* Fields of IGU VF CONFIGURATION REGISTER */
 #define IGU_VF_CONF_FUNC_EN        (0x1 << 0)  /* function enable        */
 #define IGU_VF_CONF_MSI_MSIX_EN    (0x1 << 1)  /* MSI/MSIX enable        */
 #define IGU_VF_CONF_SINGLE_ISR_EN  (0x1 << 4)  /* single ISR mode enable */

diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.h b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
index 9a8fd79611f24909ab3e45f1fd9489a28a40f77b..368e88565783bb50d7e526c87fbc34255b75b119 100644 (file)
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.h
@@ -305,7 +305,7 @@ void qed_iov_bulletin_set_udp_ports(struct qed_hwfn *p_hwfn,
 
 /**
  * @brief Read sriov related information and allocated resources
- *  reads from configuraiton space, shmem, etc.
+ *  reads from configuration space, shmem, etc.
  *
  * @param p_hwfn
  *

diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index 9a6a9a008714659acf56e93fdd7cf3d44766e3ca..d6cfe4ffbaf3d88390b96ac63481e150978f88db 100644 (file)
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1298,7 +1298,7 @@ void qede_config_rx_mode(struct net_device *ndev)
        rx_mode.type = QED_FILTER_TYPE_RX_MODE;
 
        /* Remove all previous unicast secondary macs and multicast macs
-        * (configrue / leave the primary mac)
+        * (configure / leave the primary mac)
         */
        rc = qede_set_ucast_rx_mac(edev, QED_FILTER_XCAST_TYPE_REPLACE,
                                   edev->ndev->dev_addr);

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index 2fe12b0de5b4f2a47af17caf7417d0ce48793728..42f00a2a8c8007d255d82dca96872bd7f4456c9d 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -1037,7 +1037,7 @@ static void ar9003_hw_configpcipowersave(struct ath_hw *ah,
        }
 
        /*
-        * Configire PCIE after Ini init. SERDES values now come from ini file
+        * Configure PCIE after Ini init. SERDES values now come from ini file
         * This enables PCIe low power mode.
         */
        array = power_off ? &ah->iniPcieSerdes :

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h
index 0c12df5582409db3636c256501bc57037a3f6653..05c1c77c88a0f738495d69c9d020c5cd664ecdb4 100644 (file)
--- a/drivers/net/wireless/intel/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-fh.h
@@ -148,7 +148,7 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(struct iwl_trans *trans,
  *
  * Bits 3:0:
  * Define the maximum number of pending read requests.
- * Maximum configration value allowed is 0xC
+ * Maximum configuration value allowed is 0xC
  * Bits 9:8:
  * Define the maximum transfer size. (64 / 128 / 256)
  * Bit 10:

diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c
index d4c09e54fd634d616d3b14aca79a6784fa94985a..18c4d998ce4b92e68a93c03c1773dccca68ea124 100644 (file)
--- a/drivers/net/wireless/ti/wlcore/spi.c
+++ b/drivers/net/wireless/ti/wlcore/spi.c
@@ -186,7 +186,7 @@ static void wl12xx_spi_init(struct device *child)
 
        spi_sync(to_spi_device(glue->dev), &m);
 
-       /* Restore chip select configration to normal */
+       /* Restore chip select configuration to normal */
        spi->mode ^= SPI_CS_HIGH;
        kfree(cmd);
 }

diff --git a/include/uapi/linux/dcbnl.h b/include/uapi/linux/dcbnl.h
index 69df19aa8e72890919cdab4985b5c2361de2e710..a791a94013a69a61c310e65d8e4ed21bb0d5139e 100644 (file)
--- a/include/uapi/linux/dcbnl.h
+++ b/include/uapi/linux/dcbnl.h
@@ -286,7 +286,7 @@ struct dcbmsg {
  * @DCB_CMD_GNUMTCS: get the number of traffic classes currently supported
  * @DCB_CMD_SNUMTCS: set the number of traffic classes
  * @DCB_CMD_GBCN: set backward congestion notification configuration
- * @DCB_CMD_SBCN: get backward congestion notification configration.
+ * @DCB_CMD_SBCN: get backward congestion notification configuration.
  * @DCB_CMD_GAPP: get application protocol configuration
  * @DCB_CMD_SAPP: set application protocol configuration
  * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration